imgalt

GOST 2246-70

ГОСТ 2246-70

Welding steel wire. Specifications

Проволока стальная сварочная Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 1685 dated 10.30.91

The standard applies to cold-drawn low-carbon, alloyed and high-alloy steel welding wire.

Стандарт распространяется на холоднотянутую сварочную проволоку из низкоуглеродистой, легированной и высоколегированной стали.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 6/23/1970

SKU: RUSS19467

Price: $162.00

English keywords: welding consumables;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Surfacing »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Gases »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V05 Welding and cutting of metals. Soldering, riveting »

National Standards for OKSTU » METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) » Steel wire of ordinary quality (including welding telegraph and barbed wire) »


As a Replacement Of:

GOST 2246-60: Steel filling wire

The Document References:

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 10354-82: Polyethylene film Specifications

GOST 10396-84: Crepe cable paper

GOST 10446-80: Wire. Tensile test method

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 14192-96: Cargo marking

GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications

GOST 18617-83: Wooden cases for hardware. Specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 5955-75: Reagents. Benzene. Specifications

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 859-2001: Copper. Grades

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9410-78: Petroleum xylol. Specifications

GOST 9569-2006: Paraffined paper. Specifications

GOST 9569-79: Paraffin paper

GOST 9572-93: Petroleum benzene

The Document is Referenced By:

ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions

GOST 10037-83: Autoclaves for building industry

GOST 10543-82: Surfacing steal wire. Specifications

GOST 12.4.304-2016: Occupational safety standards system. Protective clothing. Methods of testing the material on impact of splashes of molten metal

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 13276-79: Overhead line hardware. General specifications

GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18104-81: Forms of steel for the manufacture of reinforced concrete centrifuged non-pressure pipes. Specification

GOST 18130-79: Semi-automatic machines for consumable electrode arc welding

GOST 18579-79: Lifting devices of middle size freight containers with rating to 6 ton for general and specific cargoes. Specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 20259-74: General-purpose containers. General technical requirements

GOST 21029-75: Aluminum barrels for chemical products

GOST 21133-75: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds. Specification

GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 22778-77: Accessories for vertical cylindrical storage tank for petroleum products. Roll blocks. Basic parameters and dimensions. Technical requirements

GOST 22779-77: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps. Basic parameters and dimensions. Technical requirements

GOST 22784-77: Accessories for vertical cylindrical storage tank for petroleum products. Mechanisms for controlling crackers with a bypass. Basic parameters and dimensions. Technical requirements

GOST 23240-78: Welding structure. Method of estimation the brittle failure by reaction on arc welding burn

GOST 24663-81: Steam and hot water boilers. Requirements for steel welding

GOST 25101-82: Milk. Method for determination of the freezing point

GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 27702-88: Steel and alloys. Unified grades

GOST 2787-2019: Ferrous metals are secondary. General specifications

GOST 2787-75: Recycled ferrous metals

GOST 28844-90: Thermal sprayed coatings strenghtive and reductive. General requirements

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 30482-97: Electroslag welding of steels. Requirements for technological process

GOST 30765-2001: Metal transport packagings. General specifications

GOST 31832-2012: Well sucker rod pump drives. General technical requirements

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements

GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications

GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34881-2022: Trunk pipeline transport of oil and petroleum products. Stationary booms for containment of oil and oil products spills. General technical conditions

GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities

GOST 4623-80: Equipment for vertical and horizontal for petroleum products. The mechanism of control of the cracker (upper). Specification

GOST 4626-79: Equipment for horizontal tanks for petroleum products. Valve inlet. Specification

GOST 4630-71: Accessories for vertical cylindrical storage tank for petroleum products. Safety valves, welded

GOST 5.1215-72: Metal arc welding electrodes of mark АНО-4 for mild structural steel. Quality requirements for certified products

GOST 5.403-70: Steel-teeming ladles. Quality requirements for certified products

GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 8213-75: Automatic consumable electrode arc welding machines.

GOST 9078-84: Flat pallets

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9570-2016: Box and pestpallets. General specifications

GOST 9570-84: Box and post pallets

GOST R 12.4.237-2007: Occupational safety standards system. Protective clothing. Methods of testing the material on impact of splashes of molten metal

GOST R 50.04.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing of heat treatment processes

GOST R 50.04.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for technologies of working procedures by pressure

GOST R 51177-2017: Overhead line hardware. General technical requirements

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51224-98: Equipment for bank protection. Doors and manholes. General specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52664-2006: Welded pipe sheet piles. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 53686-2009: Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metal

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 55989-2014: Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements

GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification

GOST R 57471-2017: Explosion-proof metal works. General technical requirements and test methods

GOST R 58018-2017: Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications

GOST R 58021-2017: Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications

GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines

GOST R 58721-2019: Welded joints from steel grades 10ГН2МФА, 15Х2НМФА of equipment parts and pipelines of nuclear power plants. Requirements for welding, surfacing and heat treatment

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

GOST R 59136-2020: Main pipeline transportation of oil and oil products. Welding materials. General specifications

GOST R 70817-2023: Steel and alloys. Names and basic designations of grades

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

Manual to SNiP II-23-81: Manual to SNiP II-23-81 on design of strengthening of steel structures

ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges

ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.030.04-75: Stationery steam boilers. Devices for sampling of steam and water. Types, design and dimensions. Technical requirements

OST 108.030.30-79: Stationary structural steel boilers. General specifications.

OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.

OST 24.030.10: Vessels and apparatus for water treatment plants. General technical conditions

OST 24.030.45-74: Air heaters tubular steam stationary boilers. General technical conditions

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.125.02-89: Welded butt joints of npp pipelines. Types and basic dimensions

OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.

OST 24.125.31-89: Welded seams for CHP plant pipeline joints. Types and main dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.940.01-90: Welded steel structures. General technical requirements.

OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-136-81: Assembling units of steel pipelines on pressure over 9,81 to 98,1 MPa (over 100 to 1000 kgf/cm2) of complete technological lines. General specifications.

OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-04-1035-74: Assembling units and fastening details of cold pipelines with a diameter from 100 to 1020 mm. Design and dimensions.

OST 26-04-1037-74: Holders and fasteners of cold pipes to each other. Construction and dimensions.

OST 26-04-1038-74: Assembling units and fastening details of pipes with a diameter from 6 to 10 mm. Design and dimensions.

OST 26-04-1216-75: Cryogenic pipelines. Parts of disk supports. Design and dimensions.

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-04-1333-75: Straight welded stainless elbows. Design and dimensions.

OST 26-04-1334-75: Straight welded carbon steel elbows. Design and dimensions.

OST 26-04-1335-75: welded straight stainless steel tees. Design and dimensions.

OST 26-04-1337-75: Welded straight stainless steel four-way crosses. Design and dimensions.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-07-2028-81: Surfacing the sealing surfaces of pipe with Э-20Х13type electrodes. Technical requirements.

OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.

OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements

OST 34 002-73: Equipment and general-purpose machines. Requirements for materials

OST 34-10-417-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Butt-welded joints and corners. Types and sizes.

OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-570-93: Axial two-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-571-93: Axial three-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-572-93: Axial four-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-573-93: Corner single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-574-93: Corner two-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-575-93: Corner three-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-576-93: Corner four-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-577-93: Angular, single-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions

OST 34-10-578-93: Angular, double-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions

OST 34-10-579-93: Angular, three-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions

OST 34-10-580-93: Angular, four-lens, dual compensator for PN <= 1.6 MPa (16 kgf/cm2). Structure and dimensions

OST 34-10-581-93: Lens compensators for Pnom ≤1.6 MPa (16 kg/cm2). General technical requirements.

OST 34-10-743-93: Spring unit. Design and dimensions.

OST 34-10-748-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-42-569-82: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.

OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.

OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.

OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements

OST 95 10575-2002: Equipment and pipelines of separation plants. Weld joints and deposits. Control rules

OST 95-29-72: Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-11-92: Installation and Safe Operation Requirements for Hoists (Hoisting Towers)

PB 10-256-98: Regulations on design and safe operation of hoists (derricks)

PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements

PGVU 242-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round single-lens compensator for gas and air ducts

PGVU 243-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round double compensator for gas and air ducts

PGVU 244-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Three-way round compensator for gas and air ducts

PGVU 245-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Four-sided round compensator for gas and air ducts

PGVU 246-92: Compensator, rectangular single lens for gas and air ducts

PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts

PGVU 248-92: Three-slip rectangular compensator for gas and air ducts

PGVU 249-92: Four-sided rectangular compensator for gas and air ducts

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations

PNAE G-10-032-92: Requirements for welding seal element control of nuclear plant confining safety systems

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

R 393-80: Recommendations for aluminum metallization of the inner surface of pipes with an outer polyethylene coating and welding of annular joints

R 614-87: Recommendations on the technology of laser welding of non-rotary joints of pipes with a diameter of 1020 and 1220 mm

RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 22-158-86: Shovel hydraulic excavators. Work equipment. Calculation of metal structures for static strength

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-28-32-94: Album of cards of standard technological processes for repair by methods of welding and building-up of nodes of load-lifting cranes

RD 24.031.15-88: Methodological instructions. Designing stationary boilers steelworks.

RD 24.090.120-07: Design and calculation of transport and technological hoisting cranes for servicing enterprises in the metallurgical industry. Reference guide

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels

RD 26-02-63-87: Technical requirements for designing and manufacturing of vessels, vehicles and technological blocks installations of oil and gas, operating environments, causing hydrogen sulphide stress corrosion cracking.

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-17-049-85: Organization of storage, preparation and control of welding materials

RD 26-17-78-87: Pulsed-arc welding of chemical oil equipment from stainless steels with a consumable electrode in argon

RD 26-8-87: Welding of cold-resistant low-alloyed steels used in structures operated at low temperatures

RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications

RD 2730.940.102-92: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements.

RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990

RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 31.44.06-89: Low loader semi-trailers. Repair Specifications

RD 31.52.12-88: Ship propeller shafts. Recovery by electric arc surfacing with pearlitic and austenitic steels

RD 31.52.21-88: Recommendations on selection of welding materials in enterprises of Ministry of Marine.

RD 31.52.23-89: Ship diesel engines. Restoring cylinder covers using welding. Typical Processes

RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes

RD 32 TsV 052-2005: Repair of freight car trucks

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.10.124-94: Instructions for the preparation and storage of welding materials

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.10.354-88: Transformers Consumption of materials for repair

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

RD 34.17.202: Instructions for automatic submerged-arc welding of low-carbon and low-alloy steel of 20 to 60 mm thickness using granulated filler metal

RD 34.17.416-96: Guidelines for the spectral analysis of metal parts of power plants using a steeloscope

RD 34.21.142: Guidelines for the Design of Steel Pipelines for Hydraulic Structures

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD 34.27.202: Guidelines for Installation of Electric Filters Type UG

RD 34.39.101: Guidelines for Design, Construction, and Acceptance of Gas Pipelines Supplying Natural Gas to Boilers at District Electric Power Generating Stations

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.

RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 39-0147103-360-89: Instructions for the safe conduct of welding in the repair of oil and product pipelines under pressure

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 39-3-125-78: Methods of calculating consumption rates and analysis of hardware consumption

RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation

RD EO 1.1.2.25.0937-2013: Nondestructive control. Uniform requirements for the form and content of technological maps

RD OP.42-001-85: Main provisions for welding and control of the NPP tanks (reservoirs)

RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.

RDI 26-15-80: Instructions for making inner vessels of isothermal tanks for liquefied carbon dioxide

Resolution: Rules for the design and safe operation of steam and hot water boilers

RST RSFSR 687-83: Cylinders. Repair and technical certification. Rules of repair and examination

RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP 3.05.01-85: Indoor plumbing systems

SNiP II-45-75: Main pipelines

SP 105-34-96: Code of regulations on construction of trunk gas pipelines. Welding works and quality control of welding joints

SP 16.13330.2011: Steel structures

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 36.13330.2012: Trunk pipelines

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 494.1325800.2020: Spatial metallic coatings. Design rules

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 53-102-2004: General rules for steel structure design

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

ST RK 1358-2005: Pressure vessels. Requirements for welding steels

ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure

ST TsKBA 002-2003: Pipe fittings. Latches. The method of force calculation

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 068-2008: Pipe fittings. Shut-off valves with metal-to-metal seal. Technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

ST TsKBA 078-2011: Pipe fittings. Production certification. Weld Technology

ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements

ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements

STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TR 88-98: Technical recommendations on the installation technology of polymer concrete pipes for microtunnel laying of sewers with an internal diameter of 300-1200 mm

TR 94.03.2-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 03.2: Construction of Super-Structures Made from Precast Reinforced Concrete Elements

TU 102-107-76: Boxes of unified with hinged panels of BNP type (construction part of block-boxes)

TU 102-199-78: Therapeutic and prophylactic unit for hot dry baths

TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications

TU 102-416-86: Garage reinforced concrete prefabricated for individual use

TU 102-425-86: A set of structures for the building of crane (crane) with structures frame production span of 12 and 18M

TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use

TU 102-59-75: Building part of unified block-boxes with hinged BNP panels

TU 102-69-75: Unified inventory blocks for one- and two-story buildings of the watch-keeping villages

TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use

TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines

TU 14-131-621-85: Bars made of steel grade 10X18H11S5M2TYU (EP987). Pilot Industrial Party

TU 24.08.1702-91: OZS-4 brand electrodes

TU 24-09.411-82: Special electric bridge cranes

TU 26-02-19-75: Steel castings for equipment of oil refineries, petrochemical plants

TU 26-14-100-90: Single cyclones of the type СЦН-40 of the right and left execution. Technical conditions

TU 26-14-99-91: DP-10M smoke exhauster. Technical conditions

TU 34-38-20092-94: High pressure surface heaters for steam turbine regeneration systems. Technical conditions for major repairs

TU 34-38-20135-94: Tubular air heaters of stationary boilers. Technical conditions for major repairs

TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs

TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs

TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications

TU 36.1395905-016-96: Three-layer frame panels with steel facings and mineral wool insulation

TU 36-1199-81: Slatted welded floor type "Visp". Technical conditions

TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions

TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions

TU 3680-001-04698606-04: Pipe Support

TU 36-808-71: Manufacturing and acceptance of components and parts from steel pipes for internal systems of central heating, cold and hot water supply and gas supply of buildings

TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants

VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation

VNTP 12-10-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Volume 31. Hardware plants

VSN 006-89: Construction Of Main And Field Pipelines Welding

VSN 07-81/Minoborony: Technical rules of quality control and acceptance of installation work at the facilities of the Ministry of Defense

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges

VSN 2-120-80/Minneftegazstroj: Instructions on the technology for welding pipelines and technological equipment during the installation of compressor and pumping stations

VSN 349-87: Welding of Galvanized Steel Ribbed Roof Decks for Light-Weight Roofing

VSN 41.88: Design of ice-resistant stationary platforms

VSN 415-81: General Specified Quantity Allowances for Building Materials. Compendium 19: Installation of Domestic Heating, Water Supply, Drainage, and Gas Supply Systems

VSN 467-85: General Specified Quantity Allowances for Building Materials. Compendium 7: Installation of Metal Structures for Tanks and Gasholders

VSN 70-79: Guidelines for the Installation and Testing of Piping with Nominal Bore of up to 400 mm (inclusive) in Diameter Operating at Pressures over 9.8 MPa to 245 MPa (over 100 kgf per sq.m to 2500 kgf per sq.m)

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!