PB 03-108-96
ПБ 03-108-96
|
|
Process pipeline design and safe operation rules
Правила устройства и безопасной эксплуатации технологических трубопроводов
Status: Not effective
The rules for the design and safe operation of technological pipelines apply to the design, installation, manufacture, installation, operation and repair of stationary steel technological pipelines designed to transport gaseous, vaporous and liquid media in the range of residual pressure (vacuum) 0.001 MPa
Правила устройства и безопасной эксплуатации технологических трубопроводов распространяются на проектирование, устройство, изготовление, монтаж, эксплуатацию и ремонт стационарных стальных технологических трубопроводов, предназначенных для транспортирования газообразных, парообразных и жидких сред в диапазоне от остаточного давления (вакуум) 0,001 МПа (0,01 кгс/см2) до условного давления 320 МПа (3200 кгс/см2) и рабочих температур от минус 196 до плюс 700 градусов Цельсия на химических, нефтехимических, нефтеперерабатывающих, газоперерабатывающих, химико-фармацевтических, целлюлозно-бумажных, микробиологических, коксохимических, нефте- и газодобывающих предприятиях
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
3/2/1995
SKU: RUSS19492
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.20 Commercial and industrial buildings »
The Document is Replaced With:
PB 03-585-03: Process Pipelines Design and Safe Operation Rules
The Document References:
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.3.038-85: Occupational safety standards system. Construction. Works on thermal instulation of equipment and pipe lines. Safety requirements
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 1412-85: Flakish graphite cast iron
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design
GOST 17376-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Tees. Design and dimensions
GOST 17378-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Reducers. Design and dimensions
GOST 17379-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Elliptical pipe seals. Design and dimensions
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 2.104-68: Unified system for design documentation. Basic inscriptions
GOST 2.304-81: Unified system for design documentation. Letters for drawings
GOST 20072-74: Heat-resistant steel
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 21.401-88: System of design document for construction. Production technology. Main requirements to working drawings.
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 2246-70: Welding steel wire. Specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 25812-83: Steel pipe mains. General requirements for corrosion protection
GOST 2850-95: Asbestos paperboard
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8050-85: Carbon dioxide,
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
GOST 9087-81: Welding melted fluxes
GOST 9150-81: Basic norms of interchangeability. Metric screw thread. Profile
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
OPV 88: General Explosion Safety Requirements for Explosion-Hazardous Chemical, Petrochemical, and Petroleum Refining Processes
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
PBH 93: Safety rules for the production, storage, transportation and use of chlorine
SNiP 1.06.05-85: Regulation on construction design supervision of enterprises, buildings and installation by design organizations
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.09.03-85: Structures for industrial installations
SNiP 3.05.05-84: Processing equipment and process pipelines
The Document is Referenced By:
GOST R 51706-2001: Ozonisation equipment. Safety requirements
Manual: Manual for impulse and low consumption fire extinguishing systems
MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE
MI 2800-2003: State system of measuring uniformity provision. Capacity of technological pipelines. Methodics of measuring by geometric method
MI 2801-2003: Recommendation. State system for ensuring uniformity of measurements. Capacity of oil pipelines. The method of measurement using the geometric method
NTP-APK 1.10.13.002-03: Technological design norms for warehouses of liquid matters for chemicalization
OST 26-04-2153-77: Labour safety standard system. Cryogenic equipment. General safety requirements and constructions.
OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
OST 290.004-02: Rules of air division product production design.
OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
PB 08-258-98: Rules for the Construction and Safe Operation of the Main Pipeline for the Transportation of Liquid Ammonia
PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations
PB 08-353-00: Offshore Exploration Safety Rules
PB 09-220-98: Installation and Safe Operation Requirements for Ammonia-Based Refrigeration Equipment
PB 09-224-98: Safety rules for productions using inorganic acids and alkalis
PB 09-297-99: Rules of setup and safe operation of compressor units with piston compressors operating on dangerously explosive and noxious gases
PB 09-322-99: Safety Requirements for Production, Storage, Transportation, and Use of Chlorine
PB 11-219-98: Safety Requirements in Coke Byproducts Operations
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings
RD 03-357-00: Methodical recommendations for declaration of industrial safety of hazardous production facilities
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities
RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-39.4-044-99: Rules of total overhaul of main oil product pipelines laid in the cities, settlements and entering the territory of tank farms and pumping stations
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.
RD 26.260.011-99: Methodological instructions. Calculated setting of standards for air-tightness of vessels and apparatuses.
RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.
RD 34.01.203: Model Index of Operations Documentation for Chemical Shop of a Thermal Power Station
ST TsKBA 003-2003: Pipe fittings. Enclosures and covers. Rationing static strength
TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel
VRD 39-1.10-049-2001: Правила распространяются на эксплуатацию, реконструкцию и ремонт магистральных, межпромысловых и промысловых конденсатопродуктопроводов и отражают специфику транспорта стабильеого, нестабильного, деэтанизированного конденсата, широкой фракции легких углев
VRD 39-2.5-082-2003: Rules for the technical operation of gas filling stations for compressor stations
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
