Process modules for oil and gas industry. General technical specifications
Блоки технологические для газовой и нефтяной промышленности. Общие технические условия
Status: Not defined by law. In connection with the entry into force of the Federal Law of December 27, 2002 N 184-ФЗ "On Technical Regulation"
The standard establishes requirements for the design, manufacture, acceptance and supply of technological units for gas, oil and related industries.
Стандарт устанавливает требования к проектированию, изготовлению, приемке и поставке блоков технологических, предназначенных для объектов газовой, нефтяной и смежных отраслей промышленности
Format: Electronic (pdf/doc)
Page Count: 125
The Product is Contained in the Following Classifiers:
Construction (Max) »
Industry Standards and Specifications »
Industry standards »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
As a Replacement Of:
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
The Document References:
ATK 26-18-5-93: Album typical designs. Steel turning plugs for rebar flanges. Design, dimensions and specifications
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10144-89: Enamels XB-124Specifications
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10277-90: Putties. Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 10493-81: Rigid and compensating
GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements
GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements
GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.004-75: Occupational safety standards system. Heat treatment of metals. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12.3.006-75: Occupational safety standards system. Operation of water supply and sewerage systems. General safety requirements
GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.3.010-82: Occupational safety standards system. Industrial packing. Safety requirements under operation
GOST 12.4.026-76: Signal colors and safety signs
GOST 12707-77: Wash primers. Specifications
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 1293.10-83: Antimonous lead alloys. Method for the determination of tin
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 1412-85: Flakish graphite cast iron
GOST 14192-96: Cargo marking
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14791-79: Sealing non-hardening
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17379-2001: Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 18661-73: Steel. Method for measurement of hardness by shock indentation
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 2246-70: Welding steel wire. Specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 22791-83: Assembly units and pipeline parts. Dead lenses with indicator for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22826-83: Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 23101-78: Silicon-organic thermostable enamel KO-58. Specifications
GOST 23122-78: Enamels KO-811 and KO-811K. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23949-80: Welding non-consumable tungsten electrodes specifications.
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25129-82: Primer GF-031. Specifications
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions
GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions
GOST 26358-84: Pig iron castings
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 30753-2001: Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design
GOST 3242-79: Welded joints
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 4640-2011: Mineral wool. Specifications
GOST 4640-93: Mineral wool. Specifications
GOST 4666-75: Valves. Marking and distinctive painting
GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5494-95: Pigmentary aluminium. Specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance
GOST 6465-76: Enamels PF-115. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8050-85: Carbon dioxide,
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.101-78: Unified corrosion and ageing protection system. Main principles
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9064-75: Nuts for flanged connections with medium temperature 0 to 650 °C. Types and main dimensions
GOST 9066-75: Studs for flanged connections with medium temperature 0 °C to 650 °C. Types and main dimensions
GOST 9087-81: Welding melted fluxes
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9150-81: Basic norms of interchangeability. Metric screw thread. Profile
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9400-81: Threaded connecting ends for valves, fittings and pipes with tens - shaped seals for pn20-100 mpa (200-1000 kgf/cm2) dimensions
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility
GOST 9544-93: Pipeline cut-off valves
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51330.9-99: Electrical apparatus for explosive gas atmospheres. Volume 10. Classification of hazardous areas
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
NPB 105-95: Determination of Rooms and Buildings Categories on Explosion and Fire Hazard
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.14-2001: Pressure-operated vessels and devices. Leak check techniques.
OST 26.260.461-99: Steel packings of oval and octangular sections for fitting flanges. Design, dimensions and general specifications.
OST 26.260.463-99: Asbestos-metal packing for fitting flanges. Design, dimensions and general specifications. .
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26.291-87: Welded vessels and apparatus. General technical conditions
OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.
OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.
OST 26-01-84-78: Steel welded seams of pressure-operated vessels and devices. Magnetic-particle method.
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
OST 26-2037-96: Bolts with hexagonal head for flange joints. Design and dimensions.
OST 26-2038-96: Hex nuts for flange connections. Construction and dimensions.
OST 26-2039-96: Studs with screw-end for flanged connections (single precision). Design and dimensions.
OST 26-2040-96: Studs for flanged joints. Design and dimensions
OST 26-2041-96: Nuts for flange connections. Construction and dimensions.
OST 26-2042-96: Washers for flange connections. Design and dimensions.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 26-2044-83: Butt and corner welded joint seams of pressure-operated vessels and devices. Ultrasonic control method.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses
PB 03-585-03: Process Pipelines Design and Safe Operation Rules
PB 03-591-03: Rules of design and safe operation of flare systems
PB 08-624-03: Safety Regulations for oil and gas industry
PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
RD 102-005-88: Complete-block method of building ground objects. General requirements
RD 24.200.01-90: Transportation of oversized and heavy equipment. The procedure for the development and coordination of technical documentation
RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment
RD 26-02-63-87: Technical requirements for designing and manufacturing of vessels, vehicles and technological blocks installations of oil and gas, operating environments, causing hydrogen sulphide stress corrosion cracking.
RD 26-11-08-86: Welded Joints. Mechanical Tests
RD 26-17-049-85: Organization of storage, preparation and control of welding materials
RD 26-18-8-89: Welded connections of hatch, nipple and coupling welding. Main types, constructive elements and dimensions.
RTM 38.001-94: Guidelines for the calculation of strength and vibration of technologically steel pipe.
SNiP 2.04.05-86: Heating, Ventilating, and Air Conditioning
SNiP 3.05.01-85: Indoor plumbing systems
SNiP 3.05.05-84: Processing equipment and process pipelines
SNiP 3.05.06-85: Electrical devices
SNiP 3.05.07-85: Automated systems
SNiP 31-03-2001: Production buildings
TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
VNTP 01/87/04-84: Objects of gas and oil industry, made with the use of block and block-complete devices. Engineering Design Standards
VSN 21-77: Instruction on designing of heating and ventilation systems at oil refinery and petrochemical plants
VSN 2-82: Design of chemical industry heating systems of pipelines and equipment in open areas. Design instructions.
VSN 394-78: Compressors and pumps mounting instruction
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
The Document is Referenced By:
OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements
Customers Who Viewed This Item Also Viewed:
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Foundation bolts. Structure and dimensions
Pipeline valves. Leakage rates of valves
Hot-rolled sheet. Range
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
System of design documents for construction. Basic requirements for design and working documentation
Steel building structures. General specifications
Fencing constructions for translucent buildings and structures. Design rules
Metal products from structural alloy steel. Specification
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Reinforcing rolled products for reinforced concrete constructions. Specifications
Steel welded vessels and apparatus. General technical conditions
Electromagnetic compatibility of multimedia equipment. Emission requirements
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.