imgalt

SNiP 2.03.11-85

СНиП 2.03.11-85

Corrosion protection of buildings structures

Защита строительных конструкций от коррозии

Status: Not effective. Updated revision of SP 28.13330.2012 Protection of building structures from corrosion

The standards apply to the design of corrosion protection of building structures (concrete, reinforced concrete, steel, aluminum, wood, stone and asbestos concrete) of buildings and structures when exposed to aggressive environments with temperatures ranging from minus 70 to plus 50 degrees Celsius.

Нормы распространяются на проектирование защиты от коррозии строительных конструкций (бетонных, железобетонных, стальных, алюминиевых, деревянных, каменных и асбестобетонных) зданий и сооружений при воздействии агрессивных сред с температурой от минус 70 до плюс 50 градусов Цельсия.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 8/30/1985

SKU: RUSS19502

Price: $498.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 2. General technical regulatory documents » k.20 Basic provisions for reliability of building structures »

Technical Supervision » Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact » IV. Regulatory legal acts and regulations » 4. Security of capital construction objects » 4.1. Federal State Construction Supervision »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.120 Protection of buildings, inside and out » 91.120.01 Protection of buildings inside and outside as a whole »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.120 Protection of buildings, inside and out » 91.120.99 Protection of buildings, inside and out, other aspects »


As a Replacement Of:

SN 65-76: Instructions for the protection of reinforced concrete structures against corrosion caused by stray currents

SNiP II-V.9-73: Anticorrosive protection of building structures of buildings and structures. Design Standards

The Document References:

GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing

GOST 10144-89: Enamels XB-124Specifications

GOST 10178-76: Portland cement and slag Portland cement. Specification

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10277-90: Putties. Specifications

GOST 10834-76: Hydrophobizing liquid 136-41. Specifications

GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications

GOST 12586.0-83: Reinforced-concrete vibrohydropressed pressure pipes

GOST 12707-77: Wash primers. Specifications

GOST 12730.3-78: Concretes. Method of determination of water absorption

GOST 12730.5-84: Concretes. Methods for determination of water tightness

GOST 12812-80: Liquid thiokols

GOST 13489-79: Sealants, marks У-30M and УТ-31. Specifications

GOST 14818-69: Stamped no-go plain plug gauges with headpieces of diameter over 50 to 100 mm. Design and dimensions

GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications

GOST 18186-79: Primer PF020. Specification

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications

GOST 19024-79: Enamels AC-182. Specifications

GOST 19214-80: Water dispersion paints for interior works. Specifications

GOST 20833-75: Water-dispersion paints for exterior works. Specifications

GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications

GOST 22266-76: Sulphate resisting cements. Specifications

GOST 22266-94: Sulphate-resistant cements. Specifications

GOST 23122-78: Enamels KO-811 and KO-811K. Specifications

GOST 23143-83: Enamels ЭП-773. Specifications

GOST 23486-79: Wall metal-faced sandwich panels with polyurethane foam thermal insulation. Specifications

GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 24524-80: Metal-faced roof panels for industrial buildings with polyurethane foam thermal insulation. Specifications

GOST 24709-81: Enamels ЭП-140. Specifications

GOST 25129-82: Primer GF-031. Specifications

GOST 26294-84: Normal and high precision renewable jig bushes. Design and dimensions

GOST 5.2086-73: Dispersion of a copolymer of vinyl acetate with dibutyl maleate. Quality requirements for certified products

GOST 5494-95: Pigmentary aluminium. Specifications

GOST 6465-76: Enamels PF-115. Specifications

GOST 6631-74: Enamels НЦ-132. Specifications

GOST 695-77: Oil-based and alkyd paints, colored, dense, for internal works. Specification

GOST 6993-79: Enamels HV-1100. Specification

GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications

GOST 7372-79: Steel wire for ropes

GOST 8292-85: Oil and paste color paints

GOST 8866-76: Oil and alkyd earthen paints

GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.903-81: Unified system of corrosion and ageing protection. High-strength steels and alloys. Accelerated test methods for corrosion cracking

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 926-82: Enamels ПФ-133. Specifications

GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification

GOST 969-91: Alumina and high alumina cements. Specifications

GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications

Resolution 18-59: On adoption of amendments to SNiP 2.03.11-85

SN 65-76: Instructions for the protection of reinforced concrete structures against corrosion caused by stray currents

SNiP 2.01.01-82: Construction climatology and geophysics

SNiP II-V.8-71: Floors. Design Standards

SNiP II-V.9-73: Anticorrosive protection of building structures of buildings and structures. Design Standards

The Document is Referenced By:

GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications

GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST 13579-78: Concrete blocks for walls of basements. Specifications

GOST 13580-85: Reinforced concrete slabs for strip foundations. Specifications

GOST 19010-82: Concrete and reinforced concrete blocks for walls of buildings. General specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 19330-91: Centrifugal reinforced concrete posts for railway line equipment. Specifications

GOST 20213-89: Reinforced concrete roof trusses. Specifications

GOST 20372-86: Reinforced concrete rafter and longitudinal beams. Specifications

GOST 21506-87: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications

GOST 21519-2022: Window blocks made of aluminum profiles. Technical conditions

GOST 22000-86: Concrete and reinforced concrete pipes. Types and basic parameters

GOST 22130-86: Steel Pipeline Parts Movable supports and suspensions Specifications

GOST 22687.0-85: Racks reinforced concrete centrifuged for supports of high-voltage power lines. Technical conditions

GOST 22687.1-85: Racks are conical reinforced concrete centrifuged for high-voltage power transmission towers. Design and dimensions

GOST 22687.2-85: Racks cylindrical reinforced concrete centrifuged for high-voltage power transmission towers. Design and dimensions

GOST 23009-78: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 23747-88: Doors of aluminium alloys. Specifications

GOST 24045-2010: Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications

GOST 24045-94: Steel shaped sheets with trapezoid corrugations for construction

GOST 24258-88: Different types of scaffolding. General specifications

GOST 24476-80: Precast reinforced concrete foundations for columns of the framework of different kinds of application for skeletal multi-storey buildings. Specifications

GOST 24547-81: Reinforced concrete culvert sections under highway and railway embankments. Specifications

GOST 24893.0-81: Reinforced concrete frame brace for industrial buildings. Specifications

GOST 25098-87: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications

GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications

GOST 25772-83: Steel guard railing of stairways, balconies and roofs. General specifications

GOST 25818-91: Thermal plant fly-ashes for concretes. Specifications

GOST 26071-84: Racks of ferro-concrete, vibrated for supports of overhead power lines 0,38 kV. Specification

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 26819-86: Reinforced concrete pressure pipes with steel mandrel

GOST 26919-86: Reinforced concrete window boards for residential, civil and auxiliary buildings. Specification

GOST 26992-86: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 30246-94: Continuously rolled sheet steel with paint coating for Building

GOST 31384-2008: Structural concrete protection against corrosion. General requirements

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading

GOST 34914-2022: Windows for industrial buildings. General technical conditions

GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.

GOST 6786-80: Reinforced concrete parapet slabs for production buildings. Specifications

GOST 8717.0-84: Reinforced concrete and concrete steps. Specifications

GOST 9818-2015: Reinforced concrete flights of steps and stair landings. General specifications

GOST 9818-85: Reinforced concrete flights of steps and stair landings. Specification

GOST R 52059-2003: Services. Services on the repairing and construction of the habitation and other buildings. General specifications

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 53254-2009: The firefighting equipment. Stationary external fire ladders. Buildings roof railings. General technical requirements. Test methods

GOST R 53491.1-2009: Pools. Treatment of water. Part 1. General requirements

GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications

GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications

GOST R 54415-2011: Equipment for skate grounds. Safety of structure and test methods. General requirements

GOST R 54834-2011: Equipment for bank protection. Mobile cash operation terminals. General technical requirements

GOST R 55141-2012: Associated gas processing. Small-sized block gas - processing complexes. General technical requirements

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements

GOST R 59621-2022: Public roads. Bridge structures. Design of metal corrugated elements

GOST R 59688-2022: Two-layer steel panels for building coverings with polyurethane foam insulation. Technical conditions

GOST R 59689-2022: Three-layer chrysotile cement panels with foam insulation. General technical conditions

GOST R 70041-2022: Factory-made reinforced concrete piles of continuous rectangular cross-section. Specifications

GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters

GOST R 70192-2022: Dry frame cladding frame ceilings. Steel cold-formed galvanized steel frame flooring system. General technical requirements

GOST R 70222-2022: Heavy concretes. Technical conditions

GOST R 70344-2022: Translucent enclosing structures. Works on the construction of skylights. General requirements for the manufacture and control of works

GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements

GOST R 70521-2022: Reinforced Concrete Products for Silos of Elevators and Grain Processing Enterprises. General technical conditions

GOST R 70573-2022: Cladding elements, nodes and fastening details of facade hinged ventilated structures. Durability parameters

IM 14-51-94, v.2: Guidelines and explanations on topical issues of development of automation systems. Release 2. General questions of application of standard drawings

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities

Manual for SNiP 2.03.03-85: A guide to the design of reinforced cement structures

Manual for SNiP 2.03.09-85: Design of asbestos-cement structures

Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures

Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures

Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures

Manual for SNiP 2.03.13-88: Recommendations for the design of floors (in the development of SNiP 2.03.13-88 "Floors")

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 2.04.05-91: Benefit 3.91. Fan units

Manual for SNiP 2.04.05-91: Manual 4.91. Smoke protection in case of fire

Manual for SNiP 2.04.05-91: Allowance 14.91. New schemes and solutions for smoke protection of staircase elevators of multi-storey buildings

Manual for SNiP 2.04.05-91: Allowance 15.91. Smoke protection in case of fire and ventilation of underground car parks

Manual for SNiP 2.04.05-91: Benefit 5.91. Placement of ventilation equipment.

Manual for SNiP 2.04.05-91: Benefit 7.91. Duct layouts in a building

Manual for SNiP 2.04.05-91: Allowance 6.91. Fire resistant ducts.

Manual for SNiP 2.04.05-91: Benefit 2.91. Calculation of the receipt of heat of solar radiation in the premises

Manual for SNiP 2.04.05-91: Allowance 13.91. Fire protection requirements for heating, ventilation and air conditioning systems

Manual for SNiP 2.04.05-91: Benefit 8.91. The number of personnel operating heating, ventilation and air conditioning systems

Manual for SNiP 2.04.05-91: Manual 10.91 Designing Corrosion Protection

Manual for SNiP 2.04.05-91: Manual 1.91 Calculation and Distribution of Supply Air

Manual for SNiP 2.04.05-91: Allowance 12.91. Recommendations for calculating outdoor air infiltration in one-story industrial buildings

Manual for SNiP 2.04.05-91: Benefit 9.91. Annual energy consumption by heating, ventilation and air conditioning systems

Manual for SNiP 2.05.03-84: Guide to SNiP 2.05.03-84 "Bridges and pipes" for the survey and design of railway and road bridge crossings through waterways (PMP-91)

Manual for SNiP 2.06.08-87: A guide for the design of concrete and reinforced concrete structures of hydraulic structures (without prestressing)

Manual for SNiP 2.09.03-85: Design of open crane overpasses

Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment

Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines

Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide

Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls

Manual for SNiP 2.10.05-85: Manual on the design of enterprises, buildings and structures for the storage and processing of grain

Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

Manual for SNiP II-22-81: Manual for the design of stone and reinforced stone structures

Manual for SNiP II-22-81: Design and application of panel and brick walls with various types of cladding. Reference manual to SNiP

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-25-80: Design Guide for Wooden Structures

Manual for SP 52-117-2008*: Manual for the design of reinforced concrete spatial structures of coatings and floors

MDK 2-04.2004: Methodological manual for the maintenance and repair of housing

MDS 11-17.2004: Rules for the inspection of buildings, structures and complexes for liturgical and auxiliary purposes

MDS 11-3.99: Recommended Practice for Conformity Assessment of Feasibility Studies (Projects) for Construction of Nonindustrial Facilities

MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures

MDS 11-5.99: Procedure Guidelines On The Expert Appraisal of Engineering Survey for the Feasibility Study (Projects, Draft Projects) of the Construction Units

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 12-54.2010: Guidelines for use in roofs and waterproofing of polymer materials

MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide

MDS 20-2.2008: Temporary recommendations for the safety of large-span structures from avalanche-like (progressive) collapse under accidental effects

MDS 31-12.2007: The floors of residential, public and industrial buildings using materials from the company "Henkel Bautechnik." Materials for design and working drawings of nodes

MDS 31-8.2002: Recommended Practice for the Design and Installation of Skylights for Natural Illumination of Rooms

MDS 55-1.2005: Walls with insulation from expanded polystyrene and mineral wool boards with a finishing layer of thin-layer plaster. Materials for design and working drawings of nodes

MDS 56-1.2000: Recommended Practice for Selection and Installation of Advanced Window Structures

MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer

MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings

MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)

MGSN 5.02-99: Design of Urban Bridge Structures

MI 2625-2000: Recommended Practice. National Measurement Standards. Cement Materials. Accelerated Method for Measuring Water Impermeability

MR 14-02-2003: Selection and application of selective devices for pressure measuring instruments

MR 502.1-05: Guidelines for mounting connections on high-strength bolts coated with contact surfaces with friction primers in steel structures of bridges

NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry

NTP-APK 1.10.09.002-04: Standards of technological design of complexes for the cultivation of champignons

NTP-APK 1.10.09.003-04: Norms of technological design of oyster mushroom growing complexes

NTP-APK 1.10.17.001-03: Standards for technological design of bases and warehouses for general-purpose enterprises for resource provision

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts

ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures

ODM 218.2.027-2012: Guidelines for the calculation and design of reinforced ground retaining walls on highways

ODM 218.3.012-2011: Cements for concrete coatings and road foundations

ODN 218.012-99: General Technical Requirements for Barriers on Bridge Structures Located on Arterial Roads

ODN 218.015-01: Industry-Specific Road Standards for Placement of Billboards on Right-of-Ways and Roadsides of Public Roads and Highways

ONTP 01-86: All-Union standards for the technological design of engineering, instrument-making and metal-working enterprises. Forge and press shops

ONTP 05-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Metal plating workshops

ONTP 09-85: All-Union norms of technological design of enterprises for the production of products from cellular and dense autoclaved concrete

ONTP VL-78: Engineering Design Standards for 35 kV and Above Overhead Transmission Lines

ORD 00 000-89: Operation of Steel Structures of Factory and Industrial Occupancies

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures

OSN-APK 2.10.01.001-04: Design of shallow-depth foundations of low-rise rural buildings on heaving soils

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 34-29-582-82: Protective coating for steel structures of high-voltage substation overhead power line supports and open junction boxes by hot tinning method. Technical requirements. Acceptance rules and inspection methods.

OST 35-27.0-85: Reinforced concrete links of round and rectangular culverts under the railways and roads. Design and dimensions.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 45.48-96: Automatic container telephone exchanges. Construction requirements.

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PB 06-09-92: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates

PB 06-317-99: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates

PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PNAE G-05-035-94: Considerations external actions of natural and anthropogenic nature on nuclear and radiation hazardous objects

PNAE G-14-038-96: Requirements to the report on justification of safety of radioactive wastes storage buildings in part of outer impacts account

POT R M-013-2000: Industry-Wide Occupational Safety and Health Requirements for Chemical Cleaning and Washing

POT R O-14000-004-98: Regulation

POT R O-97300-03-95: Occupational Health and Safety Rules

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 03-420-01: Guidelines for Inspection of Reinforced Concrete Tanks for Petroleum and Petroleum Products

RD 10-112-1-04: Recommendations for expert examination of lifting machines. General provisions

RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.

RD 10-112-5-97: Methodological guidelines on inspection of hoisting equipment with expired service life. Part 5: Bridge and frame cranes.

RD 10-112-6-03: Guidelines for the inspection of special metallurgical cranes

RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines

RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities

RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2

RD 153-34.1-03.357-00: Recommended Practice for Improving Fire Safety of Roll Roofing on Main Buildings of In-Service Thermal Power Stations

RD 153-34.1-21.325-98: Procedural Guidelines for Groundwater Monitoring at Thermal Power Stations Under Construction and in Service

RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures

RD 153-34.2-21.544-2002: Guidelines for the chemical control of corrosion processes in water filtration through concrete and reinforced concrete hydraulic structures

RD 153-34.3-20.662-98: Model Guidelines for Maintenance of and Repair of Overhead Electric Power Transmission Lines at Voltage of 0.38-20 kV with Uninsulated Conductors

RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.

RD 153-39.4-056-00: Main crude pipeline. Operations rules.

RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 24.090.120-07: Design and calculation of transport and technological hoisting cranes for servicing enterprises in the metallurgical industry. Reference guide

RD 31.31.46-88: Method of calculation and design of hard coatings for the territory of seaports. Minmorflot, Soyuzmorniiproekt, 1988

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 31.35.10-86: Port facilities and aquatic areas operation rules

RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990

RD 31.6.07-2002: Instructions for maintenance of navigation equipment of marine approach channels and harbour areas.

RD 31.61.01-93: Guidelines on Maintenance of Navigational Aids on Sea Approach Channels, Water Bodies and Ports

RD 34.21.363-95: Procedural Guidelines for Inspection of Production Buildings and Structures at Thermal Power Plants Under Rehabilitation

RD 34.21.526-95: Model Guidelines for Operation of Metal Tanks for Storage for Liquid Fuel and Hot Water

RD 34.22.501: Procedural Guidelines for the Prevention and Removal of Mineral and Organic Deposits

RD 39-0147098-005-88: Environmental Protection Regulations for the Production, Treatment, and Transportation of Crude Oil

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 413160-02-01297858-03: Corrosion protection rules for stock-tank oil vessels and for dynamic and technological oil settling vessels

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

RD GM-01-02: Guidance Document for Corrosion Protection of Mechanical Equipment and Special Steel Structures of Hydraulic Structures

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Resolution 18-59: On adoption of amendments to SNiP 2.03.11-85

RM 4-223-89: Industrial Automation Systems. Execution Requirements for Electrical Installations for Automation Systems for Explosion Hazardous Areas

RM 4-59-95: Automation systems. Composition, design and completion of working documentation

RM 4-6-92: Process automation systems. Design of electrical and pipe wiring. Part 3. Guidelines for the implementation of the documentation. Allowance for RTM 36.22.7-92

RMD 31-10-2011 Sankt-Peterburg: Guidelines for the design of pre-school educational institutions (including classes with compensatory education)

RMD 52-02-2007 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part II

RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network

RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions

RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises

RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

RTM 36.22.8-90: Rules for the design of automation systems in TEO and project

RTM 36.44.12.2-90: Design and Installation of Foundations Using Pile Driven by Pushing

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

RU 05-85: Instructions for the design and installation of bases and foundations of vertical steel tanks in the conditions of Middle Ob

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

Series 1.015.1-1.95: Issue 2. Beams prefabricated. Directions for use

Series 1.015.1-1.95: Issue 2. Beams prefabricated. Directions for use

Series 1.030.1-1/88: Issue 0-4s. Materials for the design of walls of multi-storey buildings for construction in areas with seismicity of 7, 8 and 9 points

SNiP 1.02.07-87: Engineering Research for Construction

SNiP 2.02.03-85: Pile foundations

SNiP 2.02.04-88: Bases and foundations on the permafrost soils

SNiP 2.02.05-87: Foundations of dynamic load machines

SNiP 2.03.01-84: Concrete and reinforced concrete structures

SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing

SNiP 2.03.02-86: Concrete and reinforced concrete structures of dense silicate concrete

SNiP 2.03.06-85: Aluminium structures

SNiP 2.03.09-85: Design of asbestos cement structures

SNiP 2.03.13-88: Floors

SNiP 2.06.01-86: Hydraulic facilities. basic provisions of design activities

SNiP 2.06.03-85: Irrigation and Drainage Systems and Structures

SNiP 2.06.06-85: Concrete and reinforced concrete dams

SNiP 2.06.08-87: Concrete and reinforced concrete structures of hydro engineering facilities

SNiP 2.09.03-85: Structures for industrial installations

SNiP 2.10.04-85: Manual on design of greenhouses

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP 31-01-2003: Multicompartment residential buildings

SNiP 31-02-2001: Residental single-family houses

SNiP 31-05-2003: Public office buildings

SNiP 31-06-2009: Public buildings and constructions

SNiP 32-02-2003: Subways

SNiP 32-04-97: Railway and highway tunnels

SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SNiP II-44-78: Railway Tunnels and Highway Tunnels

SNiP III-18-75: Steel structures. Regulations on execution and acceptance of work.

SO 153-34.20.121-2006: Standards of technological design of overhead power lines with voltage of 35 - 750 kV

SO 153-34.20.122-2006: Standards for technological design of AC substations with the highest voltage of 35-750 kV

SO 34.20.810: Guidelines for the maintenance and repair of transitions overhead power lines through water barriers

SO 34.21.343-2005: Rules for assessing the physicomechanical characteristics of concrete in hydraulic structures in use

SP 107-34-96: Code of building regulations for trunk gas pipelines. Code of regulations for the construction of the line section of gas pipelines. Ballasting and securing of gas pipelines to design reference mark. Code of the regulations on construction of trunk gas pipelines

SP 11-105-97: Engineering and geological survey for construction

SP 11-114-2004: Engineering surveys on the continental shelf for the construction offshore oil and gas installations

SP 117.13330.2011: Public office buildings

SP 120.13330.2011: Subways

SP 120.13330.2012: Subway systems

SP 122.13330.2011: Railways and highway tunnels

SP 128.13330.2012: Aluminium structures

SP 13-101-99: Rules of supervision, inspection, maintenance and repair of industrial smokestacks and ventilation pipes

SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities

SP 151.13330.2012: Engineering site investigations for nuclear power plants construction

SP 16.13330.2011: Steel structures

SP 22.13330.2011: Buildings and structures foundations

SP 26.13330.2012: Foundations for machines with dynamic loads

SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 29.13330.2011: Floors

SP 31-105-2002: Design and construction of energy-efficient single-family houses with wooden frame

SP 31-113-2004: Swimming pools

SP 32-101-95: Design and installation of the foundations of bridges in areas with permafrost

SP 32-103-97: Design of offshore protection structures

SP 32-105-2004: Subways

SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

SP 45.13330.2012: Earth structures, bases and foundations

SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures

SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures

SP 52-103-2007: Reinforced concrete monolithic building structures

SP 52-104-2006: Steel fibre reineorced concrete structures

SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures

SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 53-102-2004: General rules for steel structure design

SP 55.13330.2011: Sindle-family houses

SP 55-101-2000: Fencing structures made with gypsum-cardboard sheets

SP 55-102-2001: Structures made with gypsum fiber sheets

SP 55-103-2004: Structures made with the gypsum partition plates

SP 64.13330.2011: Wooden structures.

SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite

SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.

SP 91.13330.2012: Underground mine workings

ST RK 1278-2004: Road restrictions systems. Metal safety barriers. Specification

STN TsE 141-99: Design norms for contact network

STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TR 013-1-14: Technical recommendations on the use of non-metallic composite reinforcement of a periodic profile in concrete structures

TR 149/2-05: Technical recommendations on the technology of using a complex of finishing materials for major repairs, rehabilitation and reconstruction of building facades

TR 161-05: Technical recommendations on the design, installation and operation of hinged facade systems

TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures

TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow

TR 210-09: Technical recommendations (manual) on the construction technology of underground collector tunnels of rectangular section with the use of tunnel boring complexes with all-section lining

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TR SPI 03-2009: Exterior wall panels with an INSI thermoprofile frame with external “Aquapanel” exterior-facing cement and mineral slabs for low-rise buildings for various purposes. Materials for design and working drawings of nodes

TSN 12-310-97 SO: Underground facilities

TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures

TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg

TSN 23-337-2002: Thermal insulation of equipment and pipelines. Sverdlovsk region

TSN 30-307-2002: Design Standards for Integrated Site Improvements and Amenities in the City of Moscow

TSN 31-332-2006: Residential and public high-rise buildings

TSN 41-304-2002: Apartment heating systems from gas-fired boilers. Smolensk region

TSN 41-306-2003: Thermal Insulation of Pipelines for Various Purposes. City of Moscow

TSN 41-310-2004: Apartment heating systems from gas-fired heat generators. Kursk region

TSN 50-301-96: Design of foundations and foundations of buildings and structures erected in the areas of permafrost soils. Komi Republic.

TSN 50-302-2004: Designing the foundations of buildings and structures in St. Petersburg

TSN 50-302-96: Construction of Foundations for Civil Buildings and Structures Located in the Metropolitan Area Administered by the City of St. Petersburg

TSN 50-303-99: Design and Installation of Shallow Foundations for Low-Rise Dwellings in the Moscow Region

TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures

TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities

TSN 66-301-99: Requirements for Paints and Coatings Used in Construction Practices in the Moscow Region

TSN KR-97 MO: Roofing. Technical requirements and acceptance rules

TU 102-264-81: Weighted reinforced concrete modular ring. UTK type for main pipelines

TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 102-454-88: Expanded clay and concrete for building envelopes. Technical specifications

TU 102-462-88: Frame Asbestos-Cement Wall and Roof Panels with Mineral Wool Insulation

TU 102-463-88: Frameless three-layer roofing panels with mineral wool insulation

TU 102-464-88: Three-layer aluminum frame wall panels with mineral wool insulation

TU 102-465-88: Rack reinforced concrete vibrated CB 90-3.2 for supports VL 6 - 10 kV

TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m

TU 102-587-91: Production-auxiliary box

TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)

TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)

TU 112000-001-12586100-2009: Steel curved profiles for light steel structures. Technical conditions

TU 34-12-11410-89: Racks of reinforced concrete CB95-1, CB95-1-a, CB95-2, CB95-2-a

TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications

TU 36.1395905-016-96: Three-layer frame panels with steel facings and mineral wool insulation

TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions

TU 36-1395905-027-02: Three-layer metal panels with structural insulation (wall and roofing)

TU 3680-001-04698606-04: Pipe Support

TU 5210-001-25432924-2008: Fences, road, metal, barrier type

TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type

TU 5216-002-18601734-2000: Metal road holding guard for cars, side, first type, single-sided

TU 5216-006-44884945-2006: Barrier retaining barriers for cars, side in unilateral and bilateral execution of the pavement and road groups

TU 5216-017-00110604-02: Fences bridge, holding, for cars, side, first type, single-sided

TU 5216-020-00110604-03: Fences bridge, holding, for cars, side, first type, single-sided

TU 5216-021-00110604-03: Road guardrail for cars, side, first type, metal, single-sided

TU 5216-021-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided

TU 5216-024-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided

TU 5216-025-00110604-2006: Road safety rails, for vehicles, lateral, first type, double-sided

TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided

TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal

TU 5216-067-36910961-2002: Retention fences, for vehicles, side, first type, single-sided and double-sided

TU 5216-067-36910961-97: Fences are road, holding, for cars, side, of the first type in one-sided and two-sided execution.

TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions

TU 5284-002-20582582-02: Three-layer metal panels with polyurethane foam insulation for enclosing structures. Technical conditions

TU 5285-003-42481025-2006: Cold-formed metal profiles such as "Siding", "Front panel", components and fasteners. Technical conditions

TU 5285-004-42481025-04: Steel curved profiles for building structures. Technical conditions

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

TU 67-18-163-93: Three-layer wall frameless panels with steel cladding and mineral wool insulation. Technical conditions

TU 67-18-172-94: Roofing and wall three-layer frame panels with steel linings and mineral wool insulation. Technical conditions

Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction

U-ST 01-87: Guidelines for the design of open pumping refineries and petrochemical plants

VNP-10041-2002: Departmental norms and rules for creating coastal fishing enterprises. Treatment facilities

VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices

VNTP 11-93: Engineering Design Standards for Facilities for the Production of Barley Brewer's Malt

VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities

VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines

VNTP-88: Departmental norms of technological design of washing and steaming stations

VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)

VSN 007-88: Construction of Trunk and Field Pipelines. Design and Ballasting

VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation

VSN 07/02/34 Russian Defense Ministry: Design of fuel depots of the Ministry of Defense of the Russian Federation

VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards

VSN 12-92: Guidelines for Execution and Acceptance of Construction and Installation Work Related to Electrical Service for Railroads

VSN 130-92: Execution and Acceptance Requirements for Sealing Joints and Openings in Precast Tunnel Lining Installed Using Tunnel Boring Methods

VSN 132-92: Execution and Acceptance Requirements for Injection Grouting Behind Tunnel Liner

VSN 150-68: Technical guidelines for improving the frost resistance of concrete transport structures

VSN 150-93: Guidelines for the Improvement of Frost Resistance of Concrete Used in Transportation Construction

VSN 202-90: Guidelines for Erection of 22-Story Large-Panel Residential Buildings Assembled From Modular Preassembled Elements (KOPE-85), Erected by DSK-2

VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction

VSN 33-2.2.12-87: Irrigation and Drainage Systems and Structures. Pumping Stations. Design Standards

VSN 34.72.111-92: Engineering Surveys for the Design of Thermal Power Plants

VSN 349-87: Welding of Galvanized Steel Ribbed Roof Decks for Light-Weight Roofing

VSN 39-1.9-003-98: Designs and Methods of Ballasting and Anchoring of Underground Gas Pipelines

VSN 3-94: Industry-Specific Building Code for the Installation of Underground Cold Water Supply Pipelines Made of Steel Pipe 300-600 mm in Diameter with Internal Cement-Sand Insulation

VSN 41.88: Design of ice-resistant stationary platforms

VSN 488-86: Joint Grouting Procedures for Precast Structural Elements of Underground Structures

VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels

VSN 506-88: Design and construction of ground anchors

VSN 51-9-86: Design of offshore underwater oil and gas pipelines

VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures

VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!