GOST 8735-88
ГОСТ 8735-88
|
|
Sand for construction work. Testing methods
Песок для строительных работ. Методы испытаний
Status: Effective - Supersedes. IUS 2-89
The standard applies to sand, used as aggregate for monolithic concrete, precast concrete and reinforced concrete structures, as well as material for the relevant types of construction work and establishes test methods.
Стандарт распространяется на песок, применяемый в качестве заполнителя для бетонов монолитных, сборных бетонных и железобетонных конструкций, а также материала для соответствующих видов строительных работ и устанавливает методы испытаний.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Building Committee,
10/5/1988
SKU: RUSS19538
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
K.63 Crushed stone, gravel and sand for construction work »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
014/2011 TR CU. Road safety »
Regulations and standards (to TR TS 014/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh19 Test methods. Packaging. Marking »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Non-metallic building materials »
As a Replacement Of:
GOST 25589-83: Crushed stone, gravel and sand for construction works. Methods for determining the content of sulfuric and sulfur compounds
GOST 8735-75: Sand for construction work. Methods of tests
The Document References:
GOST 10163-76: Reagents. Soluble starch. Specifications
GOST 1277-75: Reagents. Silver nitrate. Specifications
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 2184-2013: Sulphuric acid for industrial use. Specifications
GOST 22524-77: Glass density bottles. Specifications
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25589-83: Crushed stone, gravel and sand for construction works. Methods for determining the content of sulfuric and sulfur compounds
GOST 25706-83: Magnifiers
GOST 27068-86: Reagents. Sodium thiosulphate 5-aqueous. Specifications
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 29329-92: Balance for static weightings
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3760-79: Reagents. Ammonia water. Specifications.
GOST 4108-72: Reagents. Barium chloride, 2-aqueous. Specifications
GOST 4159-79: Reagents. Iodine. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4220-75: Reagents. Potassium bichromate. Specifications
GOST 4232-74: Reagents. Potassium iodide. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 83-79: Reagents. Sodium carbonate. Specifications
GOST 8735-75: Sand for construction work. Methods of tests
GOST 8736-2014: Sand for construction works. Specifications
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST R 51232-98: Drinking water. General requirements for organization and quality control methods
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
TU 6-09-1706-82: ash filters
TU 6-09-5169-84: Methyl red, indicator (methylrot; 4- (dimethylamino) -azobenzene-2-carboxylic acid) pure for analysis
The Document is Referenced By:
GOST 10181.3-81: Concrete mixture. Test method of determination of porosity
GOST 10181-2000: Concrete Mixtures Test method
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 10832-2009: Perlite expanded sand and crushed stone. Specifications
GOST 12536-2014: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 16426-81: Electrotechnical marble crumb. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 22131-2016: Concrete towers for railway high voltage signal line of autoblock. Technical requirements
GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements
GOST 22856-89: Decorative crushed natural stone and sand. Specifications
GOST 23037-2022: Refractory fillers. Technical conditions
GOST 23037-78: Unshaped refractories. Aggregates for concrete articles, masses, mixtures, coatings and mortars. Specifications
GOST 23037-99: Refractory fillers. Technical conditions
GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
GOST 23735-2014: Sandy-gravel mixtures for construction work. Specifications
GOST 23735-79: Sandy-gravel mixtures for construction work. Specifications
GOST 25226-96: Crushed stone and sand perlite for the production of expanded perlite. Technical conditions
GOST 25592-2019: Ashes and slag mixtures of thermal power plants for concrete. Technical conditions
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25607-2009: Crushed stone-sandy mixtures for road and airfield surfacing and bases. Specifications
GOST 25607-94: Crushed stone-gravel-sandy mixtures for road and airfield surfacing and bases. Specifications
GOST 25818-2017: Fly ash thermal power plants for concrete. Technical conditions
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 26644-85: Slag crushed stone and slag sand fly-ash for concrete. Specifications
GOST 28013-98: Mortars. General specifications
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31358-2007: Dry building flooring cement binder mixes. Specifications
GOST 31358-2019: Dry building floor mixes. Technical specifications
GOST 31376-2008: Dry building mixtures based on gypsum binder. Test methods
GOST 31377-2008: Dry building levelling plaster mixtures based on gupsum binder. Specifications
GOST 31386-2008: Dry building glued gypsum binder mixes. Specifications
GOST 31387-2008: Dry building рutty gypsum binder mixes. Specifications
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST 31426-2010: Friable rocks for sand, gravel and сrushed gravel for construction works. Technical requirements and test methods
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 32021-2012: Hard rock aggregates and fillers for production dre building mixes. Specifications
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 32495-2013: Aggregates, fines and its mixtures made from recycled reinforced and non-reinforced concrete. Specifications
GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods
GOST 33083-2014: Dry building plaster cement binder mixes. Specifications
GOST 33389-2015: Public roads. Deicing materials. Test methods
GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications
GOST 33699-2015: Dry building putty cement binder mixes. Specifications
GOST 33929-2016: Concrete with polysterene aggregates. Specifications
GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements
GOST 34885-2022: System of dry construction waterproofing mixtures based on cement binder for sealing static joints (cracks) in building structures. Technical conditions
GOST 4416-73: Marble for welding material. Specifications
GOST 4416-94: Marble for welding material. Specifications
GOST 5180-2015: Soils. Methods for laboratory determination of physical characteristics
GOST 5578-2019: Crushed stone and sand from slag of ferrous and non-ferrous metallurgy for concrete. Technical specifications
GOST 5578-94: Slag crushed stone and slag sand of ferrous and non-ferrous metallurgy for concretes. Specifications
GOST 7394-85: Gravel and sandy-gravel ballast for railway track. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
GOST 8736-2014: Sand for construction works. Specifications
GOST 8736-93: Sand for construction works. Specifications
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods
GOST 9758-86: Non-organic porous aggregates for construction work
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54358-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 54359-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements
GOST R 55052-2012: Reclaimed asphalt. Specifications
GOST R 55818-2018: Polymer base decorative coats for faсade’s thermo-insulation composite systems with external mortar’s lays. Specifications
GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications
GOST R 56304-2014: Refractory aggregates. Specifications
GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures
GOST R 56387-2015: Dry-mix cement based adhesives for tiles. Specifications
GOST R 56387-2018: Dry construction glue mixtures on cement binder. Technical conditions
GOST R 56593-2015: Mineral admixtures for concretes and mortars. Test methods
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 58271-2018: Dry rubbing mixes. Technical conditions
GOST R 58272-2018: Dry building masonry mixes. Technical conditions
GOST R 58275-2018: Dry mixes for building, glued, on a gypsum binder. Technical specifications
GOST R 58278-2018: Dry mixes for building putty on a gypsum binder. Technical specifications
GOST R 58279-2018: Dry plaster mixes for construction on a gypsum binder. Technical specifications
GOST R 58766-2019: Building solutions. General specifications
GOST R 58894-2020: Condensed silica fume for concrete and mortars. Specifications
GOST R 59536-2021: Metakaolin for concrete and mortar. Technical conditions
GOST R 70309-2022: Grouting compositions for the finishing decorative and protective layer of piece materials for facade thermal insulation composite systems with external plaster layers. Technical conditions
GOST R 70357-2022: Sand and gravel material from friable rocks for the production of sand, sand and gravel mix, gravel and crushed stone. General technical conditions
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MI 2488-98: Recommended Practice. National Measurement Standards. Method for Accelerated Determination of Water-to-Cement Ratio and Prediction and Monitoring Strength of Cement From its Shrinkage
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use
ODM 218.2.054-2015: Recommendations for the use of textile-sand piles in the construction of roads on weak grounds
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)
ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers
ODM 218.3.058-2015: Guidelines for the use of synthetic fiber for dispersed reinforcement of hot asphalt concrete
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.3.076-2016: Guidelines for the selection of soil stabilizers and soil mixtures for road construction
ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District
ODM 218.4.009-2017: Methodological recommendations on dust removal technology for roads with transitional type of coating using bitumen emulsion
ODM 218.8.009-2017: Methodological recommendations on dust removal technology for roads with transitional type of coating using bitumen emulsion
ODM 218.9.079-2016: Recommendations about design macrorough pavings
OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction
PNST 105-2016: Sulfur concrete mixtures and sulfur concrete. General specifications
PNST 192-2017: A mixture of crushed stone-mastic sulfur asphalt and stone-mastic sulfur asphalt. Specifications
PNST 266-2018: Cast sulfur asphalt mixture and cast sulfur asphalt. Specifications
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
R 392-80: Recommendations on the composition and technology of the preparation of very heavy concrete for pipeline weights
R 589-86: Recommendations for ballasting of pipelines at underwater crossings
RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities
RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities
RD 153-34.2-21.625-2003: Typical instructions for cementation of cracks in concrete hydraulic structures
RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.
RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990
RD 34.09.603-88: Procedural Guidelines for Organization Monitoring Composition and Properties of Ash and Slag Emitted by Thermal Power Station Consumers
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Recommendations 706: Recommendations on application of asphalt concrete on the basis of different strength stone materials
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 525-80: Process Guidelines for Making Polymer Concretes and Polymer Concrete Products
SN 529-80: Process Guidelines for Production of Structures and Products of Dense Silicate Concrete
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 3.06.04-91: Bridges and pipes
SNiP I-D.2-70: Car roads. Materials and products
SP 11-109-98: Prospecting for soil building materials
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
SP 37.13330.2012: Industrial transport
SP 46.13330.2012: Bridges and pipes
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 78.13330.2012: Automobile roads
SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.
STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
TR 106-00: Technical recommendations on the use of water-swelling materials for the installation of impervious curtains and screens, and waterproofing underground structures
TR 121-01: Technical recommendations for mastic waterproofing of the internal surfaces of the underground part of buildings and structures
TR 138-03: Technical recommendations on the use of rolled low cement concrete in pavement structures
TR 144-04: Technical recommendations on the use of waterproofing materials "Akvatron"
TR 149-03: Technical recommendations on the technology of using the complex of specialized finishing materials for the renovation of external and internal surfaces during reconstruction and major repairs of buildings
TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures
TR 185-07: Technical recommendations on the use of waterproofing dry mixes penetrating action "Kristol" (KrysTool)
TR 192-08: Technical recommendations on the construction of foundations for intra-quarter roads, incl. under adverse hydrogeological conditions, the presence of underground utilities, trenches, pits
TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TR 99-99: Technical recommendations on the use of waterproofing mortars and concrete with the material "Akvatron-6" for underground construction
TU 102-162-78: Weighers prefabricated reinforced concrete belt type UBP
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-46-75: Weights prefabricated cantilever type UKS
TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 400-I-204-9-92: Ceramic Mix "Tennis"
TU 5718.030.01393697-99: Mixes asphalt concrete crushed stone and mastic and asphalt concrete. Technical specifications
TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete
TU 5718-001-53737504-00: Mineral-Emulsion Mixes for Abrasion-Resistant Coatings
TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete
TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes
TU 5718-002-53737504-01: Poured Gray Asphalt Concrete Mixes and Poured Gray Asphalt Concrete
TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures
TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab
TU 5745-001-42806964-97: Dry Non-Shrink Mixture Monofleks-A
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards
VSN 164-69: Technical guidelines for the installation of cement-reinforced road foundations made of debris
VSN 182-91: Standards for Road Construction Material Surveying and the Design and Development of Near-Road Quarries for Road and Highway Construction
VSN 184-75: Technical guidelines for the installation of pavement bases made of stone materials, not reinforced and fortified with inorganic binders
VSN 198-88: Cold-Weather Construction of Reinforced Roadbeds for Precast Reinforced Concrete Road Pavements at Oil Fields in Western Siberia
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 31-83: Execution Requirements for Concrete Work for Construction of Hydraulic Structures
VSN 3-94: Industry-Specific Building Code for the Installation of Underground Cold Water Supply Pipelines Made of Steel Pipe 300-600 mm in Diameter with Internal Cement-Sand Insulation
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSN-1-90: Technological rules for the manufacture of centrifuged racks of contact network supports, communication lines and self-locking
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.