GOST 9466-75

ГОСТ 9466-75

Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

Электроды покрытые металлические для ручной дуговой сварки сталей и наплавки. Классификация и общие технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to the coated metal electrodes made by the method of crimping for manual arc welding of steels and surfacing of surface layers of steels and alloys. The standard does not apply to electrodes for surfacing layers of non-ferrous metals and their alloys.

Стандарт распространяется на изготовленные способом опрессовки покрытые металлические электроды для ручной дуговой сварки сталей и наплавки поверхностных слоев из сталей и сплавов. Стандарт не распространяется на электроды для наплавки слоев из цветных металлов и их сплавов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 43

Approved: State Committee of Standards of the Council of Ministers of the USSR, 3/27/1975

SKU: RUSS19547

Price: $172.26




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding work »

Welding regulations » Defects »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Standards for pipe fittings (TPA) » 10. Production » 10.4 Surfacing »

Standards for pipe fittings (TPA) » 10. Production » 10.3 Welding »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.12 Equipment for production of electrical products and materials and electro-physical processing of materials »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.6 Metal products »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V05 Welding and cutting of metals. Soldering, riveting »


As a Replacement Of:

GOST 9466-60: Electrodes, of metal, for arc welding of steels and surfacing. Dimensions and general specifications

The Document References:

GOST 10051-75: Metal covered electrodes for manual arc surfacing of upper layers with special properties types

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10354-82: Polyethylene film Specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 14192-96: Cargo marking

GOST 15623-84: Wooden cases for tools and accessories. Specifications

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 18617-83: Wooden cases for hardware. Specifications

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 2228-81: Paper for bags

GOST 2246-70: Welding steel wire. Specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 25591-83: Roof and damp proof mastics. Classification and general requirements

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26381-84: Disposable flat pallets general specifications

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 380-94: Normal quality carbon steel

GOST 4598-86: Fibre boards. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7376-89: Corrugated paperboard

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 7933-89: Cardboard for the retail containers

GOST 8273-75: Packing paper

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9421-80: Flat container pasteboard

GOST 9466-60: Electrodes, of metal, for arc welding of steels and surfacing. Dimensions and general specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

The Document is Referenced By:

GOST 10051-75: Metal covered electrodes for manual arc surfacing of upper layers with special properties types

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 11435-75: Blacksmith's hand and hammer tools. Technical requirements

GOST 12.4.035-78: Protective face shields

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 14110-97: Reusable semi rigid slings

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 15846-79: Products for transportation to the areas of the far north and remote regions

GOST 19191-73: Rigging screws with automatic stopping. Specifications

GOST 22956-83: Chain slings, mechanized, for securing cargo on vehicles. Specification

GOST 24663-81: Steam and hot water boilers. Requirements for steel welding

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications

GOST 30430-96: Arc welding of structural cast irons. Requirements for technological process

GOST 31832-2012: Well sucker rod pump drives. General technical requirements

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 95-77: Single-operator single-phase transformers for manual arc welding. General specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

GOST R 52277-2004: Tamping picks of ballast tampers for levelling and lining railway tracks. Specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 53686-2009: Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metal

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54889-2012: Reusable semirigid slings. Specifications

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 57054-2016: Mining equipment. Tubing cast iron. Sets of tubing rings. General specifications

GOST R 58018-2017: Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications

GOST R 58021-2017: Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications

GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 24.030.10: Vessels and apparatus for water treatment plants. General technical conditions

OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.

OST 24.191.08-81: Hook crane suspensions. Design and dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-04-1036-74: Assembling units and fastening details of warm pipelines with a diameter from 100 to 1020 mm. Design and dimensions.

OST 26-04-1038-74: Assembling units and fastening details of pipes with a diameter from 6 to 10 mm. Design and dimensions.

OST 26-04-1039-74: Parts for mounting pipes with a diameter from 6 to 95 mm. Design and dimensions

OST 26-04-1040-74: Support for t warm-air pipelines with diameter from 100 to 325 mm. Design and dimensions.

OST 26-04-1041-74: Support for t warm-air pipelines with diameter from 325 to 1020 mm. Design and dimensions.

OST 26-04-1042-74: Bearing carbon steel for cold pipes with diameters from 250 to 1020 mm. Design and dimensions..

OST 26-04-1043-74: Support of high-alloy r steel for cold pipes. Design and dimensions.

OST 26-04-1334-75: Straight welded carbon steel elbows. Design and dimensions.

OST 26-04-1336-75: welded straight carbon steel tees. Design and dimensions.

OST 26-04-1338-75: Welded straight carbon steel four-way crosses. Design and dimensions.

OST 26-04-2386-79: Lugged transportation plugs for working P 0 MPa (0 kg/cm2). Design and dimensions.

OST 26-04-2387-79: Steel plugs to test vessels and apparatus for Py 0.1 MPa (1 kg/cm2), Py 0.6 MPa (6 kg/cm2). Design and dimensions.

OST 26-07-2028-81: Surfacing the sealing surfaces of pipe with Э-20Х13type electrodes. Technical requirements.

OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

OST 36-39-80: Steel technological pipelines made of carbon and alloy steels for pressure Ру up to 9.81 MPa (100 kgf / cm2). Shielded manual metal arc welding. Typical technological process.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements

OST 95 10575-2002: Equipment and pipelines of separation plants. Weld joints and deposits. Control rules

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-278-99: Process rules for qualification tests of welders and welding production specialists

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 08-258-98: Rules for the Construction and Safe Operation of the Main Pipeline for the Transportation of Liquid Ammonia

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-11-92: Installation and Safe Operation Requirements for Hoists (Hoisting Towers)

PB 10-157-97: Installation and Safe Operation Requirements for Pipe-Laying Machine Safety

PB 10-256-98: Regulations on design and safe operation of hoists (derricks)

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations

PNAE G-10-032-92: Requirements for welding seal element control of nuclear plant confining safety systems

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.

RD 03-495-02: Procedures for the qualification test of welders and welding work specialists

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 108.021.112-88: Correction of defects in the cast hull parts of steam turbines and valves by welding without heat treatment

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-39.4-044-99: Rules of total overhaul of main oil product pipelines laid in the cities, settlements and entering the territory of tank farms and pumping stations

RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment

RD 26.260.12-99: Service life extension of liquid carbon dioxide vessels. Instructional guidelines.

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-07-264-86: Anticorrosive weld deposit of sealing surfaces of pipeline fittings.

RD 26-11-08-86: Welded Joints. Mechanical Tests

RD 26-17-049-85: Organization of storage, preparation and control of welding materials

RD 26-3-86: Procedural Guidelines for Extending the Service Life of Tanks for Liquid Carbon Dioxide

RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications

RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.10.124-94: Instructions for the preparation and storage of welding materials

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 39-0147103-330-86: Guidelines for Welding Patches and Couplings to Walls of Petroleum Pipelines Operating Under Pressure up to 2.0 MPa

RD 39-0147103-360-89: Instructions for the safe conduct of welding in the repair of oil and product pipelines under pressure

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.

RD RTM 26-362-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of iron and steel

RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures

SNiP 3.05.03-85: Heat networks

SNiP II-45-75: Main pipelines

SP 105-34-96: Code of regulations on construction of trunk gas pipelines. Welding works and quality control of welding joints

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 36.13330.2012: Trunk pipelines

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 86.13330.2014: Main (Trunk) pipelines

ST RK 1358-2005: Pressure vessels. Requirements for welding steels

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements

STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TU 102-107-76: Boxes of unified with hinged panels of BNP type (construction part of block-boxes)

TU 24.08.1702-91: OZS-4 brand electrodes

VSN 005-88: Construction of field steel pipelines Technology and arrangement

VSN 006-89: Construction Of Main And Field Pipelines Welding

VSN 110-64: Technical guidelines for the design and construction of foundations and piers of prefabricated reinforced concrete shells

VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges

VSN 170-80: Guidelines for Erection of 16-Story Large-Panel Residential Buildings Assembled From Standardized Products Listed in the Uniform Catalog Series P44/16, Erected by DSK-1

VSN 200-83: Work Execution Guidelines for Substructure Construction for High-Rise Residential Buildings

VSN 202-90: Guidelines for Erection of 22-Story Large-Panel Residential Buildings Assembled From Modular Preassembled Elements (KOPE-85), Erected by DSK-2

VSN 349-87: Welding of Galvanized Steel Ribbed Roof Decks for Light-Weight Roofing

VSN 433-82: Guidelines for Semi-Automatic Flux-Core Wire Welding of Assembly Connections of Steel Structures for Factory and Industrial Buildings and Structures

VSN 464-85: General Specified Quantity Allowances for Building Materials. Compendium 20: Installation of Industrial Ventilating Systems

VSN 70-79: Guidelines for the Installation and Testing of Piping with Nominal Bore of up to 400 mm (inclusive) in Diameter Operating at Pressures over 9.8 MPa to 245 MPa (over 100 kgf per sq.m to 2500 kgf per sq.m)

GOST 23858-2019: Welded butt joints of reinforced concrete structures. Ultrasonic methods of quality control. Acceptance rules

ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges

ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 24.090.120-07: Design and calculation of transport and technological hoisting cranes for servicing enterprises in the metallurgical industry. Reference guide

RD 31.44.06-89: Low loader semi-trailers. Repair Specifications

RD 31.52.23-89: Ship diesel engines. Restoring cylinder covers using welding. Typical Processes

RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes

RD 32 TsV-056-97: Freight cars of 1520 mm gauge railways. Quick Release Guide

RD 34.10.354-88: Transformers Consumption of materials for repair

RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities

Resolution: Rules for the design and safe operation of steam and hot water boilers

RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises

TU 24-09.411-82: Special electric bridge cranes

TU 3680-001-04698606-04: Pipe Support

VSN 2-120-80/Minneftegazstroj: Instructions on the technology for welding pipelines and technological equipment during the installation of compressor and pumping stations

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!