PB 10-382-00
ПБ 10-382-00
|
|
Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
Правила устройства и безопасной эксплуатации грузоподъемных кранов. Серия 10. Выпуск 7.
Status: Not effective - Not applicable. Order of the Federal Service for Ecological, Technological and Atomic Supervision dated November 12, 2013 No. 533 shall not apply the resolution of the Federal Mining and Industrial Supervision of Russia dated December 31, 1999 No. 98 (the order shall enter into force 10 days after the day of its official publication , the text of the order is published in the Bulletin of normative acts of federal executive bodies of February 24, 2014 No. 8)
The rules establish the requirements for the design, installation, manufacture, reconstruction, repair, installation, installation and operation of cranes, their components and mechanisms, safety devices, as well as load-handling organs, load-handling devices and containers
Правила устанавливают требования к проектированию, устройству, изготовлению, реконструкции, ремонту, монтажу, установке и эксплуатации грузоподъемных кранов, их узлов и механизмов, приборов безопасности, а также грузозахватных органов, грузозахватных приспособлений и тары
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
12/31/1999
SKU: RUSS19575
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding materials »
Wire »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.13. Lifting facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.7 Industrial safety requirements for hoisting facilities »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
The Document is Replaced With:
Order 533: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"
Order 533: On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
As a Replacement Of:
PB 10-14-92: Codes for installation and safe operation of lifting cranes
The Document References:
GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements
GOST 12.2.058-81: Requirements for color of crane components dangerous in exploitation
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 12840-80: Safety locks for single hooks. Type and dimensions
GOST 13556-91: Building tower pillars building tower pillars
GOST 1451-77: Hoisting cranes. Wind load. Norms and methods of determination
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines
GOST 18899-73: Steel wire ropes. Locked conveying wire ropes. Specifications
GOST 191-82: Loading leaf chains
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 2105-75: Forged and swaged hooks. Technical requirements
GOST 22045-89: Overhead travelling single-beam cranes. Specifications
GOST 22584-96: Electric rope hoists
GOST 22827-85: General purpose self-propelled boom cranes
GOST 228-79: Anchor chains
GOST 24599-87: Rope grab buckets for bulk cargoes
GOST 26627-85: Rolled roofing's and hydroinsulatings materials. Acceptance rules
GOST 2688-80: Two lay rope type ЛК-Р construction 6x19 (1+6+6/6)+1 o.c. Dimensions
GOST 27551-87: Lifting appliances. Controls layout and characteristics. Part 2. Basic arrangement and requirements for mobile cranes
GOST 27552-87: Mobile cranes. Terms and definitions
GOST 27553-87: Lifting appliances. Basification by mode of operation
GOST 27555-87: Lifting appliances. Vocabulary. Part. General
GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications
GOST 27913-88: Lifting appliances. Controls. Layout and characteristics. Part 1. General principles
GOST 27914-88: Mobile cranes. Drum and sheave sizes
GOST 28434-90: Overhead travelling stacker cranes
GOST 28609-90: Hoisting cranes. Basic provisions of design
GOST 28648-90: Crane wheels
GOST 29266-91: Cranes and related equipment. Accuracy requirements for measuring parameters during testing
GOST 30321-95: Hoisting cranes. Safety requirements for hydraulic equipment
GOST 3071-88: Two lay steel rope type ТК construction 6x37 (1+6+12+18)+1 o.с. Dimensions
GOST 3079-80: Two lay rope type ТЛК-О construction 6x37 (1+6+15+15)+1 o.с. Dimensions
GOST 3241-91: Steel ropes
GOST 6619-75: Single and double horned lamellar hooks. Specifications
GOST 6627-74: Single hooks. Blanks. Types. Construction and dimensions
GOST 6628-73: Ramshorn hooks. Blanks. Type. Construction and dimensions
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7668-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+1 o.с. Dimensions
GOST 7669-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 51248-99: Overland rail crane tracks. Principal specifications
Order 480: The procedure for conducting a technical investigation of the causes of accidents, incidents and cases of loss of industrial explosives at facilities supervised by the Federal Service for Environmental, Technological and Nuclear Supervision
Order 480: Rules for the preparation of documentation on the organization of road traffic
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
RD 03-10-2004: Instruction on the issue of permits for the use of specific types of devices at hazardous industrial facilities from the central office of the federal ecological, technological and atomic supervision service
RD 03-19-2007: Regulations on the organization of work on the training and certification of specialists of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision
RD 03-20-2007: Regulations on the organization of training and knowledge testing of workers of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision
RD 03-247-98: Provision on registration, drawing-up and recording authorizations on manufacturing and employment technical devices in the system of Gosgortechnadzor of Russia
RD 03-293-99: Statute laying down a procedure for technical inquiry into the causes of failures at hazardous production facilities
RD 03-348-00: Methodological guidelines for magnetic inspection of steel ropes. Basic provisions.
RD 04-265-99: Regulations of training and official evaluation of employees of enterprises operating hazardous production facilities under control of the Gosgortekhnadzor of Russia
RD 10-08-92*: Instructions for the supervision of the manufacture, repair and installation of lifting structures
RD 10-112-96: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 1: General Provisions
RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD 10-208-98: Standard manual for adjusters of safety instruments of hoisting cranes
RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.
RD 10-34-93: Standard manual for persons responsible for crane operations safety performance
RD 10-385-00: Recommended Practice for Classification of Accidents and Incidents Involving Hoisting Facilities, Steam Boilers, Hot Water Boilers, Pressure Vessels, and Steam and Hot Water Piping
RD 10-40-93: Standard manual for engineering and technical personnel to oversee safe operation of lifting equipment
RD 10-49-94: Instructions for the Issue of Special Permits (Licenses) for Activities Connected With Safety Provision for Boiler Inspection Items and Lifting Structures
RD 10-89-95: Procedural Guidelines for the Inspection of Hoisting Facilities Operators (Owners)
RD 22-145-85: Jib mobile cranes. Stability calculation standards.
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 22-166-86: Construction tower cranes. Rate of calculation
RD 22-205-88: Ultrasonic flaw detection of welded joints of lifting machines. Main provisions.
RD 22-207-88: Lifting machines. General requirements and production standards
RD 24.090.97-98: Materials handling equipment. Requirements for construction, repair and reconstruction of steel structures of cranes.
Resolution 1371: Rules for registration of facilities in the state register of hazardous production facilities
Resolution 160: Rules for establishing protective zones for electric grid facilities and special conditions for the use of land plots located within the boundaries of such zones
Resolution 73: Regulations on the specifics of investigating industrial accidents in certain industries and organizations and Forms of documents required for the investigation and recording of industrial accidents
SNiP 12-03-2001: Labor safety in construction industry
The Document is Referenced By:
GOST 25251-82: Electric gantry cranes. Testing methods
GOST 31335-2006: Technological foundry equipment. Equipment for shot shooting, shot blasting and shot shooting-blasting treatment. Safety requirements
GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements
GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements
GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements
GOST R 53866-2010: Crane rails. Specifications
GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 54767-2011: Cranes. Test code and procedures
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 55005-2012: Renewable power engineering. Geothermal power plants. Safety requirements under operation
GOST R 57613-2017: Graphite electrodes and nipples. Specifications
GOST R ISO 14122-1-2009: Safety of machinery - permanent means of access to machinery. Part 1. Choice of fixed means of access between two levels
Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)
Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines
IOT RZhD-4100612-TsV-013-2012: Standard requirements for the repair and maintenance of technical equipment at hazardous production facilities of the wagon economy
ITOs 22-01-01: Instructions for the technical examination of cranes
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.01.01-85: Manual on the development of construction projects and agricultural production projects
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for the reconstruction of existing enterprises, buildings and structures. Reference manual to SNiP
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for industrial construction
Manual for SNiP 3.01.01-85: A guide to the development of projects for the organization of the construction of large industrial complexes using the nodal method
Manual for SNiP 3.01.01-85: A guide for the development of construction organization projects and civil works construction projects
Manual for SNiP 3.01.01-85: A guide for the organization of high-speed construction of roads and airfields using sets of machines of the DS-100 type
MDS 12-11.2002: Procedures Manual for SNIP 12-03-2001 "Occupational Safety and Health in Construction. Part 1: General Requirements" for Occupational Safety and Health Training and Testing of Supervisors and Specialists in Construction
MDS 12-14.2003: Methodological manual for SNiP 12-04-2002
MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization
MDS 12-17.2004: Methodological manual for the joint venture 12-133-2000 Safety of labor in construction. Regulations on the procedure for certification of workplaces on working conditions in construction and housing and communal services. Expert safety assessment of non-
MDS 12-19.2004: Mechanisation of constraction
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-26.2006: Methodological manual for the examination of knowledge of labor protection requirements by executives and specialists of construction organizations
MDS 12-27.2006: Methodological manual for conducting labor protection training for executives and specialists of construction organizations
MDS 12-28.2006: Methodological guide for the expert assessment of the safety of non-stationary jobs at construction sites
MDS 12-31.2007: Guidelines for technical certification of removable load-handling devices
MDS 12-32.2007: Standard norms of periodicity, labor intensity and duration of maintenance and repair of cranes
MDS 12-35.2007: Methodological manual for the development of administrative and regulatory documentation of the labor protection management system of a construction organization
MDS 12-39.2008: Recommendations for the preparation of a project for the installation of a panel high-rise building
MDS 12-42.2008: Norming of cost of technical inspection, maintenance, and repair of cranes, crane tracks, performance of design and construction works
MDS 12-44.2008: Recommendations for drafting work on the construction of a railway track tower crane
MDS 12-45.2008: Recommendations for drafting a project for the installation and operation of a tower crane
MDS 12-47.2008: Roofing of metal tiles. Design of works
MDS 12-49.2009: Layouts of labor protection instructions for construction workers. Toolkit
MDS 12-53.2010: Layouts of administrative and regulatory documents of the labor protection management system of a construction organization. Toolkit
MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications
MDS 12-60.2011: Production design for installation of steel structures of buildings
MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps
MU 22-28-05-99: Evaluation of the residual life of the cranes. Methodical instructions
NPB 197-2001: Fire elevators. General technical requirements. Test methods
NTP-APK 1.10.17.001-03: Standards for technological design of bases and warehouses for general-purpose enterprises for resource provision
ODM 218.2.036-2013: Guidelines for the design, repair, maintenance and operation of ferries and floating bridges
ONK 140-13: Crane Load Limiter
Order 1155: Model program on the course "Industrial, Environmental, Energy Safety, Safety of Hydraulic Structures" for pre-certification (pre-examination) training of managers and specialists of organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision.
Order 50: Labor protection rules during the performance of reclamation works
Order 51: Occupational health and safety regulations in the tobacco industry
Order 533: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"
Order 533: On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Order 892: Labor protection rules for the production of alcohol, vodka, brandy, wines, beer and juices
Order 893: Labor protection regulations in the oil and fat industry
Order 895: Labor protection rules for the production of baker's yeast
Order 898: Labor protection rules for storage of fruits and vegetables
Order 899: Occupational safety rules for agricultural workers when using pesticides and agrochemicals
P 79-2000: Model Guidelines for Operation of Hydraulic Structures of Electric Power Generating Stations
PB: Safety regulations and industrial sanitation for loading and unloading operations on railway transport
PB: Safety regulations and industrial sanitation for the repair and maintenance of railway tracks and structures
PB 03-428-02: Safety Requirements for Construction of Underground Structures
PB 06-07-92: Uniform Safety Requirements for Underground Development of Mineral Deposits Using Opencast Method
PB 06-123-96: Safety Requirements for Operation of Tailings, Slag, and Hydraulic-Mine Dump Facilities
PB 06-317-99: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates
PB 08-353-00: Offshore Exploration Safety Rules
PB 09-220-98: Installation and Safe Operation Requirements for Ammonia-Based Refrigeration Equipment
PB 09-322-99: Safety Requirements for Production, Storage, Transportation, and Use of Chlorine
PB 10-11-92: Installation and Safe Operation Requirements for Hoists (Hoisting Towers)
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
POT R M 001-97: Rules for labor protection in logging, woodworking industries and during forestry work. Part I
POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals
POT R M-007-98: Industry-Wide Occupational Safety and Health Requirements for Freight Loading/Offloading and Placement Operations
POT R M-012-2000: Industry-Wide Occupational Safety and Health Requirements for Work at Heights
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities
POT R M-027-2003: Intersectoral rules on labor protection in road transport
POT R O 00030171: Labor protection rules during the operation of navigable hydraulic structures
POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars
POT R O 29-001-93: Labor protection regulations for printing companies
POT R O 45-004-94: Labor protection rules on radio relay communication lines of the Ministry of Communications of the Russian Federation (with Amendments and Additions)
POT R O 97300-01-95: Labor protection rules in the production of crop products
POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry
POT R O-001-2002: Rules on labor protection for printing organizations
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
POT R O-14000-007-98: Ordinance - Occupational Safety and Health for Material Storage
POT R O-45-009-2003: Rules for labor protection when working on linear structures of cable transmission lines
POT RO-13153-TsM-933-03: Industry rules for labor protection in the economy of freight and commercial work on the federal railway transport
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
R 589-86: Recommendations for ballasting of pipelines at underwater crossings
RD 03-348-00: Methodological guidelines for magnetic inspection of steel ropes. Basic provisions.
RD 09-250-98: Procedure for safe repairs on chemical, petrochemical and oil hazardous production facilities
RD 10-107-96: Standard manual for strappers on works safety performance by cargo hoisting ma-chines
RD 10-112-1-04: Recommendations for expert examination of lifting machines. General provisions
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 10-112-3-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 3: Non-Self-Propelled Tower and Boom Cranes, and Derrick Cranes and Timber-Handling Cranes
RD 10-112-5-97: Methodological guidelines on inspection of hoisting equipment with expired service life. Part 5: Bridge and frame cranes.
RD 10-112-6-03: Guidelines for the inspection of special metallurgical cranes
RD 10-112-96: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 1: General Provisions
RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
RD 10-118-96: Basic Safety Requirements for Load Limiters for Electric Bridge and Gantry Cranes
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD 10-199-98: Standard manual for safe operation for hoisters (towers) operators
RD 10-208-98: Standard manual for adjusters of safety instruments of hoisting cranes
RD 10-30-93: Standard Guidelines for Engineering and Technical Support Personnel Responsible for Maintaining Hoisting Machinery in Safe Operating Condition
RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.
RD 10-34-93: Standard manual for persons responsible for crane operations safety performance
RD 10-399-01: Requirements for parameter recorders of cargo cranes
RD 10-40-93: Standard manual for engineering and technical personnel to oversee safe operation of lifting equipment
RD 10-525-03: Recommended Practice for Testing of Hoisting Machines
RD 10-74-94: Model instruction for crane operators (machinists) on safe operation of self-propelled cantilever cranes (truck-mounted, wheel-mounted on special automobile-type chassis, crawler-mounted, and tractor-mounted)
RD 11-06-2007: Guidelines on development procedure for work execution program and schedule for hoisting machines and loading-unloading operations process chart.
RD 153-34.0-03.107-2001: Model Ordinance on the Occupational Safety and Health Office in Electric Power Organizations
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
RD 153-34.0-03.420-2002: Occupational Safety and Health Requirements for Operation and Maintenance of Automobiles and Other Wheeled Vehicles in the Electric Power Industry
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 153-34.0-20.608-2003: Guidelines. Project work for the repair of power equipment power plants. Requirements for the composition, content and design
RD 153-34.3-03.285-2002: Safety Requirements for Construction of Electric Power Transmission Lines and Electrical Installation Work
RD 220-12-98: Standard instructions for the safe operation of metal lifting devices and containers
RD 220-14-98: Standard manual for safe operation of the textile belt slings
RD 22-207-88: Lifting machines. General requirements and production standards
RD 22-28-36-01: Lifting cranes. Typical program and test procedure. Standard testing programs and procedures.
RD 22-28-37-02: Requirements for the organization and conduct of work on the installation (disassembly) of load-lifting cranes
RD 22-28-38-2007: Recommendations on design, production and safe operation of supporting typing back of tower cranes to building structures.
RD 24.090.102-01: Basic safety requirements for the design and operation of wind-proof systems for bridge and gantry cranes
RD 24.090.120-07: Design and calculation of transport and technological hoisting cranes for servicing enterprises in the metallurgical industry. Reference guide
RD 24-112-4R: Guidelines for the assessment of the residual life of gantry cranes
RD 24-112-5R: Guidance Document for Estimating the Residual Life of Bridge Cranes
RD 24-SZK-01-01: Freight slings for general use on a textile basis. Requirements for the device and safe operation
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.52.22-88: Rules for technical operation of ship-raising structures
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.03.215: Safety instructions for excavation work using the hydromechanization method at the facilities of the USSR Ministry of Energy
RD 34.10.126-94: Instructions for operational control of assembly processes, welding and heat treatment.
RD 34.30.605: Process instruction for replacement of steam turbine blades
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.
RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD 51-2-97: Instructions for in-line inspection of pipeline systems
RD 52.18.847-2016: Rules for safety and fire safety at the stations of rocket sounding of the atmosphere, conducting launches of meteorological (geophysical) rockets
RD EO 0069-97: Rules for the organization of maintenance and repair of systems and equipment of nuclear power plants
RD EO 1.1.2.05.0929-2013: Guidelines for acceptance inspections at manufacturing plants and entrance control at NPP of 1st, 2nd and 3rd security class equipment
RD NIIKranostroeniya 02-05: Jib cranes for general purposes and hoisting cranes. Typical Test Programs
RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications
RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes
RD SMA-002-03: Typical instruction for information processing specialists of cranes parameter recorders
RD SMA-004-04: Standard instructions for specialists in the operational support of safety devices for lifting machines
RD SMA-006-07: Model program and methods of performance tests (surveys) of safety devices of lifting machines
RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RGP-85: Guidelines for cargo transportation on domestic air routes of the USSR
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SDOS-08-2012: Guidelines on the procedure for conducting acoustic emission monitoring of metal structures of jib cranes
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SO 153-34.48.519-2002: Rules for design, construction and operation of fiber-optic communication lines on overhead power lines with voltage of 0.4-35 kV
SP 120.13330.2012: Subway systems
SP 12-103-2002: Tracks for ground rail cranes. Design, installation and operation
SP 12-135-2002: Labor safety in construction. Industry standard instructions for labor protection
SP 12-135-2003: Safety in construction. Industry standard safety instructions. To replace SP 12-135-2002
SP 12-136-2002: Decisions regarding labor protection and industrial safety in construction organization plans and work execution plans
SP 225.1326000.2014: Station buildings, structures and devices
SP 31-108-2002: Refuse ducts for residential and public buildings and structures.
SP 32-105-2004: Subways
SP 43.13330.2012: Structures for industrial installations
SP 56.13330.2011: Industrial buildings
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions
VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation
VRD 39-2.5-082-2003: Rules for the technical operation of gas filling stations for compressor stations
VSN 2-105-78: Instructions for construction of temporary roads for pipeline construction in difficult conditions (for wet and saturated terrains)
VSN 39-1.8-008-2002: Design of electrical insulating inserts for main and field pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
