SP 53-102-2004
СП 53-102-2004
|
|
General rules for steel structure design
Общие правила проектирования стальных конструкций
Status: Effective - Introduced for the first time
The set of rules applies to the design of steel building structures of buildings and structures for various purposes, operating at an ambient temperature not higher than 100 degrees Celsius and not less than minus 65 degrees Celsius. The set of rules does not apply to the design of steel structures of bridges, tunnels and pipes under embankments.
Свод правил распространяется на проектирование стальных строительных конструкций зданий и сооружений различного назначения, работающих при температуре окружающей среды не выше 100 градусов Цельсия и не ниже минус 65 градусов Цельсия. Свод правил не распространяется на проектирование стальных конструкций мостов, тоннелей и труб под насыпями.
Choose Language:
Format: Electronic (pdf/doc)
Approved: TSNIISK im.Kucherenko,
9/10/2004
SKU: RUSS19577
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Fluxes »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10906-78: Square taper washers. Specifications
GOST 11371-78: Washers. Specifications
GOST 11474-76: Bent-steel sections. Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14954-80: Two lay rope type ЛK-P construction 6x19(1+6+6/6)+7x7(1+6). Dimensions
GOST 1497-84: Metals. Methods of tension test
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 18123-82: Washers
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18901-73: Steel wire ropes. Locked conveying wire rope with two layers of Z-wire and type TK core. Dimensions
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 21437-95: Zinc antifriction alloys. Marks, technical requirements and test methods
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22353-77: High strength bolts of product grade B. Construction and dimensions
GOST 22354-77: High strength nuts of product grade B. Construction and dimensions
GOST 22355-77: Product grade C washes for high strength bolts. Construction and dimensions
GOST 22356-77: High strength bolts and nuts аnd washes. General specifications
GOST 2246-70: Welding steel wire. Specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 24379.0-80: Foundation bolts. General specification
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24839-81: Structural steelwork. Lay-out of holes in rolled shapes. Dimensions
GOST 25546-82: Hoisting cranes. Work conditions
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction
GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications
GOST 3062-80: One lay rope type ЛК-О construction 1x7 (1+6). Dimensions
GOST 3063-80: One lay rope type ТК construction 1x19 (1+6+12). Dimensions
GOST 3064-80: One lay rope type ТК construction 1x37 (1+6+12+18). Dimensions
GOST 3066-80: Two lay rope type ЛК-О construction 6x7 (1+6)+1x7 (1+6). Dimensions
GOST 3067-88: Two lay steel rope type ТК construction 6x19 (1+6+12)+1x19 (1+6+12). Dimensions
GOST 3068-88: Two lay steel rope type ТК construction 6x37 (1+6+12+18)+1x37 (1+6+12+18). Dimensions
GOST 3081-80: Two lay rope type LK-O construction 6x19(1+9+9)+7x7(1+6). Dimensions
GOST 3090-73: Steel wire ropes. Locked conveying wire rope with one layer of Z-wire and type ТК cope. Dimensions
GOST 380-94: Normal quality carbon steel
GOST 3822-79: Bimetallic steel-copper wire
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 6402-70: Lock washers. Specifications
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7372-79: Steel wire for ropes
GOST 7669-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions
GOST 7675-73: Steel wire ropes. Locked conveying wire rope with one layer of V-shaped wire, one layer of Z-wire and type ТК cope. Dimensions
GOST 7676-73: Steel wire ropes. Locked conveying wire rope with two layers of V-shaped wire, one layer of Z-wire and type TK core. Dimensions
GOST 8050-85: Carbon dioxide,
GOST 839-80: Uninsulated cables for aerial power
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9087-81: Welding melted fluxes
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.09.03-85: Structures for industrial installations
SNiP 3.03.01-87: Bearing and enclosing structures
The Document is Referenced By:
GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements
Manual for SP 52-117-2008*: Manual for the design of reinforced concrete spatial structures of coatings and floors
ODM 218.3.103-2018: Recommendations for the use of screw piles on roads
RD 24.090.120-07: Design and calculation of transport and technological hoisting cranes for servicing enterprises in the metallurgical industry. Reference guide
SP 43.13330.2012: Structures for industrial installations
SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design
SP 64.13330.2011: Wooden structures.
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
