Codes for installation and safe operation of lifting cranes
Правила устройства и безопасной эксплуатации грузоподъемных кранов
Status: Not effective - Superseded
These Rules establish the requirements for the design, installation, manufacture, installation, repair, reconstruction and maintenance of load-lifting machines and mechanisms, as well as load handling organs, devices and containers
Настоящие Правила устанавливают требования к проектированию, устройству, изготовлению, установке, ремонту, реконструкции и эксплуатации грузоподъемных машин и механизмов, а также грузозахватных органов, приспособлений и тары
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
12/30/1992
SKU: RUSS19579
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding materials »
Wire »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.7 Industrial safety requirements for hoisting facilities »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
The Document is Replaced With:
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
The Document References:
GOST 1088-71: Sisal ropes. Specification
GOST 12.1.013-78: Occupational safety standards system. Construction. Electrical safety. General requirements
GOST 12.2.058-81: Requirements for color of crane components dangerous in exploitation
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 12840-80: Safety locks for single hooks. Type and dimensions
GOST 13556-91: Building tower pillars building tower pillars
GOST 1412-85: Flakish graphite cast iron
GOST 1451-77: Hoisting cranes. Wind load. Norms and methods of determination
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15.001-73: Products development and launching into manufacture. General principles
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1575-87: Hoisting cranes. Series of main parameters
GOST 16765-87: General-purpose self-propelled boom cranes. Acceptance and testing methods
GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines
GOST 18699-73: Electric windshielf wipers. Specifications
GOST 18899-73: Steel wire ropes. Locked conveying wire ropes. Specifications
GOST 191-82: Loading leaf chains
GOST 2.601-68: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 2105-75: Forged and swaged hooks. Technical requirements
GOST 22045-89: Overhead travelling single-beam cranes. Specifications
GOST 22584-88: Rope electric hoists. Specifications
GOST 22827-85: General purpose self-propelled boom cranes
GOST 228-79: Anchor chains
GOST 24599-87: Rope grab buckets for bulk cargoes
GOST 25546-82: Hoisting cranes. Work conditions
GOST 25573-82: Freight handling rope slings for construction
GOST 25835-83: Lifting capacity cranes. Duty classifications of mechanisms
GOST 2583-92: Batteries consisting of cylindrical manganese-zinc cells with electrolyte solution
GOST 2688-80: Two lay rope type ЛК-Р construction 6x19 (1+6+6/6)+1 o.c. Dimensions
GOST 27551-87: Lifting appliances. Controls layout and characteristics. Part 2. Basic arrangement and requirements for mobile cranes
GOST 27552-87: Mobile cranes. Terms and definitions
GOST 27553-87: Lifting appliances. Basification by mode of operation
GOST 27555-87: Lifting appliances. Vocabulary. Part. General
GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications
GOST 27913-88: Lifting appliances. Controls. Layout and characteristics. Part 1. General principles
GOST 27914-88: Mobile cranes. Drum and sheave sizes
GOST 28609-90: Hoisting cranes. Basic provisions of design
GOST 28648-90: Crane wheels
GOST 29266-91: Cranes and related equipment. Accuracy requirements for measuring parameters during testing
GOST 30321-95: Hoisting cranes. Safety requirements for hydraulic equipment
GOST 3241-80: Steel ropes. Specification
GOST 3241-91: Steel ropes
GOST 483-75: Hemp ropes. Specification
GOST 6619-75: Single and double horned lamellar hooks. Specifications
GOST 6627-74: Single hooks. Blanks. Types. Construction and dimensions
GOST 6628-73: Ramshorn hooks. Blanks. Type. Construction and dimensions
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7665-80: Two lay rope type ЛK-3 construction 6x25(1+6; 6+12)+1 o.с. Dimensions
GOST 7667-80: Two lay rope type ЛК-3 construction 6x25(1+6; 6+12)+7x7(1+6). Dimensions
GOST 7668-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+1 o.с. Dimensions
GOST 7669-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions
GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles
GOST R 54767-2011: Cranes. Test code and procedures
OST 24.090.85-88: Electric drives of cargo cranes. Calculation standards.
OST 36-62-81: Hoisting equipment. General technical requirements.
RD 10-08-92*: Instructions for the supervision of the manufacture, repair and installation of lifting structures
RD 22-145-85: Jib mobile cranes. Stability calculation standards.
RD 22-166-86: Construction tower cranes. Rate of calculation
RD 22-205-88: Ultrasonic flaw detection of welded joints of lifting machines. Main provisions.
RD 22-207-88: Lifting machines. General requirements and production standards
RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.
RD 24.090.90-89: Lifting machines. Basic requirements for technical documentation for reconstruction
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 3.08.01-85: Construction mechanical means. Rail tracks for tower cranes
The Document is Referenced By:
GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements
GOST 12.3.027-2004: Foundry work. Safety requirements
GOST R 51248-99: Overland rail crane tracks. Principal specifications
GOST R 51763-2001: Well sucker rod pump drives. General technical requirements
MDK 4-02.2001: Model Guidelines for Operation of Piped Heat Supply Networks of Public Piped Heat Supply Systems
MDS 12-10.2001: Model Standards for Frequency, Labor, and Duration of Maintenance and Repair of Hoisting Cranes
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MU 22-28-05-99: Evaluation of the residual life of the cranes. Methodical instructions
MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions
OST 34 023-74: Winches special electric gantry hook cranes. Parameters and dimensions. Technical requirements
OST 34-42-840-86: Organization of assembly works in nuclear thermal power plants of ВВЭР-1000 type. Assembly of thermal and mechanical equipment. Main provisions.
PB 06-09-92: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
PB 08-389-00: Safety Rules for Gas Processing Plants Production
PB 11-242-98: Foundry Safety Requirements
PB 11-80-94: Safety Requirements in Blast Furnace Operations
POT R M-002-97: Intersectoral rules on labor protection in foundry
POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals
POT R M-006-97: Intersectoral labor protection rules for cold metal processing
POT R M-007-98: Industry-Wide Occupational Safety and Health Requirements for Freight Loading/Offloading and Placement Operations
POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products
POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings
POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures
POT R O-14000-005-98: Position. Work with increased danger. Organization of
POT R O-14000-007-98: Ordinance - Occupational Safety and Health for Material Storage
POT R O-152.31.82.03-96: Occupational health and safety regulations in seaports
POT R O-200-01-95: Rules on labor protection in automobile transport
POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway
POT R O-45-005-95: Occupational Safety and Health Requirements for Work on Cable Communications Lines and Closed-Circuit Radio Broadcasting (Installation of Closed-Circuit Radio Networks)
POT R O-45-006-96: Rules for labor protection on overhead communication lines and wire broadcasting (radio)
POT R O-95120-001-94: Rules of labor protection at retailers
POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery
RD 03-348-00: Methodological guidelines for magnetic inspection of steel ropes. Basic provisions.
RD 03-85-95: Rules On the Certification of Controlled Goods for Potentially Hazardous Industrial Production, Objects and Works
RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair
RD 08-200-98: Safety rules in the oil and gas industry
RD 10-103-95: Standard manual for crane operators (drivers) for safe use of overhead and gantry cranes
RD 10-112-2-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 2: Self-Propelled General-Purpose Boom Cranes
RD 10-112-3-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 3: Non-Self-Propelled Tower and Boom Cranes, and Derrick Cranes and Timber-Handling Cranes
RD 10-112-5-97: Methodological guidelines on inspection of hoisting equipment with expired service life. Part 5: Bridge and frame cranes.
RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD 10-197-98: Guidelines for Operating Condition Assessment of Bolted and Riveted Joints of Hoisting Cranes
RD 10-208-98: Standard manual for adjusters of safety instruments of hoisting cranes
RD 10-93-95: Standard manual for crane operators (drivers) for safe use of tower cranes
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 153-39TN-009-96: Ordinance on the System for Maintenance and Repair of Electrical Installations of Trunk Petroleum Pipelines Part I
RD 2201-2-79: Construction tower cranes. Recommendations for the use and operation of steel ropes
RD 22-28-35-99: Design, construction and safe operation of the rail tracks of tower cranes
RD 22-326-97: Self-propelled jib cranes and loader cranes. Overhaul. General technical conditions
RD 22-329-03: Standard manual for persons responsible for safety of scaffold trucks
RD 22-330-03: Standard instruction for operators (crane operators) on the safe operation of crane-manipulators
RD 24.090.100-99: Lifting and handling equipment. Guidance for input quality control of structural steel and welding materials for manufacture, repair, renovation and installation of steel structures of cranes
RD 24.090.120-07: Design and calculation of transport and technological hoisting cranes for servicing enterprises in the metallurgical industry. Reference guide
RD 24.090.90-89: Lifting machines. Basic requirements for technical documentation for reconstruction
RD 24.090.97-98: Materials handling equipment. Requirements for construction, repair and reconstruction of steel structures of cranes.
RD 31.3.05-97: Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 31.40.21-86: The system of organizational and technological documentation for the processes of loading and unloading. General Provisions
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.46.05-87: Typical test program for experimental and serial cable-type grabs
RD 31.46.07-87: Rope grabs for bulk cargo. Typical strength calculations. Technique
RD 31.80.04-87: Model Ordinance on Organization of Occupational Safety and Health Work in Ports (on Piers) Administered by the Ministry of the Merchant Marine
RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities
RD 34.03.213: Safety Guidelines for Installation of Thermal Mechanical Equipment and Piping Systems of Thermal Power Stations and Nuclear Power Plants
RD 34.03.215: Safety instructions for excavation work using the hydromechanization method at the facilities of the USSR Ministry of Energy
RD 34.04.502: Model Ordinances on Departments of Hydroelectric Generating Stations and Stages of Hydroelectric Generating Stations
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 34.30.605: Process instruction for replacement of steam turbine blades
RD 95 10549-2000: Safety Assessment Requirements for Extending the Life of Nuclear Power Plant Units
RD ROSEK 01-011-96: RD establishes the procedure for drawing up a passport for all types of bridge and gantry cranes.
RD ROSEK-001-96: Hoisting machines. Metal structures. Ultrasonic control. Key Points
RD ROSEK-003-97: Hoisting machines. Magnetic particle control. Key Points
RD ROSEK-004-97: Hoisting machines. Capillary control. Key Points
RD ROSEK-006-97: Hoisting machines. Metal structures. Ultrasonic thickness gauging. Key Points
RD ROSEK-007-97: Hoisting machines. Eddy current control. Key Points
RD ROSEK-01-002-96: Hoisting machines. Metal structures. Radiation control. Key Points
RTM 24.080.23-72: Safety precautions. The content and construction of the section in the standards and design documents for machines and mechanisms for underground mining
RTM 24.090.80-85: Hoisting and transporting machines for fire hazardous areas. General design requirements
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SNiP 12-03-99: Occupational safety in construction part one. General safety requirements
SP 12-133-2000: Safety in construction. Statutes on the procedure for certification of work stations by working conditions in construction and housing and utilities.
ST SSFZhT TsM 025-2001: Services provided on the federal railway transport for the carriage of goods. Certification requirements
ST SSFZhT TsP 016-99: Special rolling stock. Typical test methods for strength of supporting metal structures of frames, bodies, working bodies and their fastening elements
ST SSFZhT TsT-RB 090-2000: Cranes, type shooting on the course. Typical strength test
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TOI R-66-53-95: Model Guidelines for Occupational Safety and Health for Operators of Cranes "DIP" and "Pioneer
TsPI 6/32: Technological indications of the coloring of metal structures of railway bridges in operation
VNTP 81-85: Norms of technological design for petroleum-refining and organic synthesis products manufacture enterprises
VRD 39-2.5-082-2003: Rules for the technical operation of gas filling stations for compressor stations
VSN 169-84: Safety Guidelines for Pipe Welders
VSN 25-09.66-85: Automatic fire extinguishing installations and security, fire and burglar and fire alarm. Installation Plan. Drafting Guidelines.
VSN 356-86: Erection of Structural Elements to Support Space-Frame Pipe Roofing Assemblies of "Kislovodsk" Type for One-Story Industrial Occupancies
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
