GOST 1435-90
ГОСТ 1435-90
|
|
Unalloyed tool steel bars, strips and coils
Прутки, полосы и мотки из инструментальной нелегированной стали
Status: Not effective - Superseded. IUS 5-2001
This standard applies to forged bars and strips; hot-rolled rods, strips and hanks, calibrated and with special surface finish from tool unalloyed carbon steel, as well as in terms of the norms of chemical composition - for ingots, billet, sheet, tape, wire and other products
Настоящий стандарт распространяется на прутки и полосы кованые; прутки, полосы и мотки горячекатаные, калиброванные и со специальной отделкой поверхности из инструментальной нелегированной углеродистой стали, а также в части норм химического состава - на слитки, заготовку, лист, ленту, проволоку и другую продукцию
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Product Quality and Standards Management,
3/30/1990
SKU: RUSS19592
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.35 Tool steel »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.35 Tool steel »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V32 Rolled and shaped steel »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Sorted tool steel »
The Document is Replaced With:
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
As a Replacement Of:
GOST 1435-74: Non-alloyed tool steel. Specification
The Document References:
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 103-76: Hot-rolled steel strip. Dimensions
GOST 1051-73: Calibrated quality steel
GOST 1133-71: Forged round and square steel. Dimensions
GOST 14955-77: Quality round steel with a special surface finish
GOST 1497-84: Metals. Methods of tension test
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 2216-84: Adjustable smooth snap gauges
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 2590-88: Round steel bars. Dimensions
GOST 2591-88: Square Hot-rolled Steel Bars Dimensions
GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions
GOST 5378-88: Vernier protractors. Specifications
GOST 7417-75: Calibrated round steel
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-81: Rolled stock and products for further treatment
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8559-75: Square bar steel. Products sizes
GOST 8817-82: Metals. Upsetting test method
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
The Document is Referenced By:
GOST 10110-87: Circles diamond
GOST 10234-77: Moderate strength flattened
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 1051-73: Calibrated quality steel
GOST 10778-83: Spatulos. Specifications
GOST 11042-90: Construction steel hammers. Specifications
GOST 11784-74: Rectangular finishing trowels. Design
GOST 11785-74: Finishing trowels for large foundry moulds and cores. Design
GOST 11786-74: Narrow-nosed finishing trowels. Design
GOST 11787-74: Tapered finishing trowels. Design
GOST 11788-74: Straight finishing beads. Design
GOST 11789-74: Shaped finishing beads. Design
GOST 11790-74: Finishing scoops with trowels. Design
GOST 11791-74: Finishing lancets. Design
GOST 11792-74: Finishing scoops with lancets. Design
GOST 11793-74: Straight finishing gaggers. Design
GOST 11794-74: Finishing gaggers with heel. Design
GOST 11795-74: Finishing gaggers with heel and lancet. Design
GOST 11797-74: Triple-edged knives for shaping foundry cores. Design
GOST 11798-74: Corrugating rolls for cleaning foundry cores. Design
GOST 11906-77: Spiral bevel and hypoid gear-shaping cutter heads. Specifications
GOST 12482-67: Rollers. Design
GOST 13215-79: Thrust centers and semi-centers
GOST 13334-67: Driver chucks. Design and dimensions
GOST 13764-86: Cylindrical helical compression (tension) springs made of round steel. Classification
GOST 1465-80: Files
GOST 14839.16-69: Industrial explosives. Methods of cartridge diameter control
GOST 1513-77: Needle files. Technical conditions
GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications
GOST 15598-70: Piano steel wire
GOST 15864-81: Guide bushes for sheet stamping dies. Construction and dimensions
GOST 15876-90: Gauges for products made from wood and wooden materials
GOST 15936-70: Quick-changing stiff adapters for taps. Design and dimensions
GOST 15987-91: Wooden bodied planes
GOST 16135-70: Steel wire for calculating devices
GOST 16621-80: Round punches with diameter from 1 mm to 24 mm. Construction and dimensions
GOST 16625-80: Round punches diameter from 24 mm to 52 mm. Construction and dimensions
GOST 16626-80: Quick-changing round punches for ball mounting. Construction and dimensions
GOST 16629-80: Quick-changing round punches for screw mounting. Construction and dimensions
GOST 16631-80: Square punches. Construction and dimensions
GOST 16634-80: Quick-changing oblong punches. Construction and dimensions
GOST 16635-80: Elongated oblong punches. Construction and dimensions
GOST 16637-80: Female dies with round hole. Construction and dimensions
GOST 16646-80: Female dies with elongated oblong hole. Construction and dimensions
GOST 16647-80: Quick-changing female dies with elongated oblong hole. Construction and dimensions
GOST 16714-71: Non-mechanized hand fire instruments. Specifications
GOST 16894-71: Fixing bolts with head for plates. Design
GOST 16895-71: Fixing sheared bolts with head for plates. Design
GOST 16898-71: Fixing bolts with stop. Design
GOST 16899-71: Fixing sheared bolts with stop. Design
GOST 16900-71: Fixing cylindrical bolts. Design
GOST 16901-71: Fixing cylindrical sheared bolts. Design
GOST 17122-85: Diamond grinding heads
GOST 17385-72: Guide pins of plastic moulds and die casting dies. Construction and dimensions
GOST 17386-72: Step-shaped guide pins of plastics moulds and die casting dies. Construction and dimensions
GOST 17388-72: Long-sized guide bushings of plastics moulds and die casting dies. Construction and dimensions
GOST 18981-73: Pipe toggle wrenches
GOST 19171-73: Adjustable holders for angled fastening of cutter for turret lathes. Design and dimensions
GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators
GOST 19671-91: Tungsten wire for light sources
GOST 2.109-73: Unified system for design documentation. Basic requirements for drawings
GOST 2016-86: Thread gauges. Specifications
GOST 20305-94: Gauges for tapers with conisity of 7:24
GOST 21010-75: Dielectric screwdrivers
GOST 21997-76: Steel flattened strip of high strength
GOST 24023-80: Round punches with elongated working part. Construction and dimensions
GOST 2424-83: Grinding wheels
GOST 24360-80: Shell-type face mills with inserted carbide teeth
GOST 2475-88: Wires and rolls
GOST 25727-83: Letter and digital hand stamps
GOST 26103-84: Electrical insulating materials
GOST 26238-93: Jib bushes. Specifications
GOST 26665-91: Metal bodied planes. Technical specifications
GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination
GOST 286-82: Clay sewer pipes
GOST 2876-80: Gripping collets. Basic and coupling dimensions
GOST 2877-80: The grips giving. Main and connecting dimensions
GOST 4045-75: Hand-operated bench vice
GOST 4156-93: Pruning saws
GOST 4229-94: Colter knives. Specifications
GOST 4230-93: Garden knives
GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions
GOST 5210-82: Hot-rolled profiled steel for files, rasp files and chisels
GOST 6476-80: Files for sharpening wood saws. Specifications
GOST 6876-79: Rasps. Technical conditions
GOST 7236-93: Flat-nose pliers. Specifications
GOST 8.411-81: State system for ensuring the uniformity of measurements. Lever micrometres. Rules and procedure of verification
GOST 8026-92: Levelling rules. Specifications
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST R 50072-92: Multiple slip joint pliers. Specifications
GOST R 50835-95: High explosives. Sensitivity characteristics determination for friction when impact displacement
GOST R 51015-97: Blades for household and special use. General specifications
GOST R 51268-99: Scissors. General specifications
GOST R 52787-2007: Hinge and pliers tools. Technical requirements
MI 1799-87: Guidelines. Squares testing 90 degrees. Control method
MI 2077-90: Micrometers with inserts
MI 2130-91: Recommendation. State system for ensuring uniformity of measurements. Universal involutes of firms Zeiss Jena, Maag, Klingelnberg, Hofler, Osaka Seimitsu Kikai and Hamai. Verification Method
OST 302-07-1152-92: Cylindrical helical compression springs. General specifications.
OST 3-98-80: Constructional and spring refining steel. Technical requirements.
PI 249-2000: Riveting of metal structures. application
RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.
RST RSFSR 508-75: Electric Guitar. General technical requirements
ST RK GOST R 50835-2010: High explosives. Sensitivity characteristics determination for friction when impact displacement
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.