GOST 7890-93

ГОСТ 7890-93

Travelling single girder suspended cranes. Specifications

Краны мостовые однобалочные подвесные Технические условия

Status: Effective - Supersedes. IUS 5-1994

The standard applies to electric single-girder overhead suspension cranes of the 3K operating mode group with an electric hoist and an electric movement mechanism, controlled from the floor, with a carrying capacity from 1.0 to 10 tons, as well as single-girder suspended bridge cranes of modular construction, unified with electric with a manual drive of the lifting and moving mechanism, 1K operation mode groups, with a loading capacity from 1 to 5 tons. The standard establishes requirements for cranes manufactured for the needs of the national economy and exports . The standard does not apply to cranes intended for operation in explosive and fire hazardous environments, in rooms with vapors of acids and alkalis, the concentrations of which cause the destruction of electrical insulation, for transportation of molten and red-hot metal, toxic substances.

Стандарт распространяется на мостовые электрические однобалочные подвесные краны группы режима работы 3К с электрической талью и электрическим механизмом передвижения, управляемые с пола, грузоподъемностью от 1,0 до 10 т, а также на краны мостовые ручные однобалочные подвесные блочно-модульной конструкции, унифицированные с электрическими, с ручным приводом механизма подъема и передвижения, группы режима работы 1К, грузоподъемностью от 1 до 5 т. Стандарт устанавливает требования к кранам, изготовляемым для нужд экономики страны и экспорта. Стандарт не распространяется на краны, предназначенные для эксплуатации во взрывоопасных и пожароопасных средах, в помещениях с парами кислот и щелочей, концентрации которых вызывают разрушение электрической изоляции, для транспортирования расплавленного и раскаленного металла, ядовитых веществ.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 32

Approved: Interstate Council for Standardization, Metrology and Certification, 10/21/1993

SKU: RUSS19620

Price: $150.48




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 53 Handling equipment »

Welding regulations » Welding work »

Welding regulations » Metal structures »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Defects »

Welding regulations » Welding work » Dusting »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.5 Lifting and rigging equipment »

ISO classifier » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.020 Lifting equipment » 53.020.20 Cranes »

National standards » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.020 Lifting equipment » 53.020.20 Cranes »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G8 Machinery and equipment of universal application » G86 Lifting equipment »


The Document is Replaced With:

GOST 34589-2019: Hoisting cranes. Overhead and gantry cranes. General technical requirements

As a Replacement Of:

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

The Document References:

GOST 10144-89: Enamels XB-124Specifications

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10354-82: Polyethylene film Specifications

GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions

GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.058-81: Requirements for color of crane components dangerous in exploitation

GOST 12.4.026-76: Signal colors and safety signs

GOST 12707-77: Wash primers. Specifications

GOST 12969-67: Plates for machines and devices. Technical requirements

GOST 12971-67: Rectangular plates for machines and devices. Dimensions

GOST 14192-96: Cargo marking

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.

GOST 15164-78: Electroslag welding. Welded joints. Main types, design elements and dimensions

GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents

GOST 22584-96: Electric rope hoists

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3956-76: Silica gel technical. Technical conditions

GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9378-93: Roughness comparison specimens

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

RD 50-690-89: Methodological instructions. Industrial product dependability. Methods for estimating dependability based on experimental data.

The Document is Referenced By:

ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)

R 3112199-0254-92: Time sheet of technological equipment for ATP of various capacities of TC and BTW

RD 26-17-049-85: Organization of storage, preparation and control of welding materials

SNiP II-40-80: Metro

SNiP III-G.10.1-69: Handling equipment. Rules of production and acceptance of installation works

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m

VNTP 02-85: Industry-Specific Engineering Design Standards for General Purpose Warehouses

RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes

SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Hot-rolled sheet. Range
Language: English
Price: $72.27
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!