SNiP II-12-77
СНиП II-12-77
|
|
Noise protection
Защита от шума
Status: Not effective - Superseded
Standards should be observed when designing noise protection to ensure acceptable sound pressure levels and sound levels in premises at workplaces in industrial and auxiliary buildings and at sites of industrial enterprises, in residential and public buildings, as well as in residential areas of cities and other settlements .
Нормы должны соблюдаться при проектировании защиты от шума для обеспечения допустимых уровней звукового давления и уровней звука в помещениях на рабочих местах в производственных и вспомогательных зданиях и на площадках промышленных предприятий, в помещениях жилых и общественных зданий, а также на селитебной территории городов и других населенных пунктов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
6/14/1977
SKU: RUSS19658
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
5 Protection against mechanical vibrations »
5.2 Acoustic noise »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.140 The impact of noise on humans »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.20 Acoustics in buildings. Soundproofing »
The Document is Replaced With:
SNiP 23-03-2003: Noise protection
As a Replacement Of:
SN 399-69: Acoustic Calculation Guidelines for Ventilation Units
SNiP II-73-76: Cinemas
SNiP II-L.16-71: Clubs. Design Standards
SNiP II-L.20-69: Theaters. Design Standards
The Document References:
GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.2.028-84: General-purpose ventilators. Methods of noise characteristics determination
SN 245-71: Sanitary standards for the design of industrial enterprises
SN 399-69: Acoustic Calculation Guidelines for Ventilation Units
SNiP II-73-76: Cinemas
SNiP II-L.16-71: Clubs. Design Standards
SNiP II-L.20-69: Theaters. Design Standards
The Document is Referenced By:
A3-861: Recommendations for the calculation of structural noise from the air aggregates installed on the ceilings, and methods for reducing it
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 16297-80: Sound insulation and sound absorption materials. Methods of testing
GOST 26279-84: Power units for organic thermal stations. General requirements for noise suppression
GOST 26434-85: Reinforced concrete panels for floors in residential buildings. Types and basic parameters
GOST 9574-80: Gypsum concrete panels for partitions. Specifications
GOST IEC 62040-3-2009: Guaranteed power supply systems. Uninterruptible power supply units. Part 3. General technical requirements. Test methods
GOST R 51991-2002: Non-traditional power engineering. Wind power engineering. Wind turbines. General technical requirements
GOST R 52766-2007: Automobile roads of general use. Road facilities. General requirements
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.04-97: Design of sound insulation of walling of residential and public buildings
Manual for MGSN 2.04-97: Designing protection against traffic noise and vibrations of residential and public buildings
Manual for MGSN 2.04-97: Designing protection against noise and vibration of engineering equipment in residential and public buildings
Manual for MGSN 4.07-96: Manual for MGSN 4.07-96 "Preschools"
Manual for MGSN 4.18-99: Household services. Issue 1. Basic requirements and general provisions
Manual for MGSN 4.18-99: Household services. Issue 2. Space-planning and engineering solutions
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
Manual for SNiP 2.03.13-88: Recommendations for the design of floors (in the development of SNiP 2.03.13-88 "Floors")
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.05-91: Benefit 3.91. Fan units
Manual for SNiP 2.04.05-91: Manual 4.91. Smoke protection in case of fire
Manual for SNiP 2.04.05-91: Allowance 14.91. New schemes and solutions for smoke protection of staircase elevators of multi-storey buildings
Manual for SNiP 2.04.05-91: Allowance 15.91. Smoke protection in case of fire and ventilation of underground car parks
Manual for SNiP 2.04.05-91: Benefit 8.91. The number of personnel operating heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Manual 10.91 Designing Corrosion Protection
Manual for SNiP 2.04.05-91: Manual 1.91 Calculation and Distribution of Supply Air
Manual for SNiP 2.04.05-91: Allowance 12.91. Recommendations for calculating outdoor air infiltration in one-story industrial buildings
Manual for SNiP 2.04.05-91: Benefit 9.91. Annual energy consumption by heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Benefit 5.91. Placement of ventilation equipment.
Manual for SNiP 2.04.05-91: Benefit 7.91. Duct layouts in a building
Manual for SNiP 2.04.05-91: Allowance 6.91. Fire resistant ducts.
Manual for SNiP 2.04.05-91: Benefit 2.91. Calculation of the receipt of heat of solar radiation in the premises
Manual for SNiP 2.04.05-91: Allowance 13.91. Fire protection requirements for heating, ventilation and air conditioning systems
Manual for SNiP 2.08.02-89: Designing Higher Educational Institutions and Continuing Education Institutions
Manual for SNiP 2.08.02-89: Designing consumer services enterprises
Manual for SNiP 2.08.02-89: Design of catering facilities
Manual for SNiP 2.08.02-89: Health Facility Design Guide
Manual for SNiP 2.08.02-89: Club Design
Manual for SNiP 2.08.02-89: Pool Design
Manual for SNiP 2.08.02-89: Design of educational complexes and centers
Manual for SNiP 2.08.02-89: Design of vocational, secondary special educational institutions and educational combines
Manual for SNiP 2.08.02-89: Design of kindergartens
Manual for SNiP 2.08.02-89: Design of warning and evacuation systems for people during fires in public buildings
MDS 13-6.2000: Method for the Determination of Unfitness of Residential Occupancies and Dwelling Units for Occupation
MDS 31-5.2000: Recommended Practice for the Design of Places of Worship
MDS 31-9.2003: Orthodox churches. Volume 2. Orthodox churches and complexes. Allowance for design and construction (to SP 31-103-99)
MDS 32-1.2000: Recommended Practice for the Design of Depots
MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies
MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer
Methodical instructions 4425-87: Sanitary and hygienic control of ventilation systems of industrial premises. Methodical instructions
MGSN 1.01-97: Part 1: Interim Urban Development Code of the City of Moscow
MGSN 1.01-98: Part 2: Interim Urban Development Code of the City of Moscow
MGSN 3.01-01: Residential buildings
MGSN 4.07-05: Preschool educational institutions
MR 2291-81: Guidelines for improving the conditions of training and education of students of the communication specifications in the specialty telegraph
MR 3910-85: Guidelines for the sanitary control of the organization of circle activities in out-of-school institutions
MU 2410-81: Guidelines for the prevention of the adverse effects of occupational noise on the body of adolescents
MU 2515-81: Guidelines for the organization of training of students of higher educational institutions
MU 4283-87: Guidelines for the bodies and institutions of the sanitary-epidemiological service for monitoring the implementation of the "Sanitary norms for permissible noise in the premises of residential and public buildings and in the residential area" No. 3077-84
MU 4425-87: Sanitary and hygienic control of ventilation systems of production areas
MU 4428-87: Guidelines for improving the state preventive sanitary inspection of the design of workshops and welding stations, the development of technological processes and equipment for welding production
NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry
NTPD-90: Norms of technological design of diesel power plants
ONTP 01-82/Minavtoprom: All-Union norms for technological design of engineering, instrument-making and metal-working enterprises. Forging shops
ONTP 01-85/Minjelektrotehprom: All-Union norms for the technological design of electrical repair shops (departments) of engineering, instrument-making and metalworking enterprises
ONTP 01-86/Minavtotrans RSFSR: All-Union norms for technological design of automobile transport enterprises
ONTP 02-85: National Engineering Design Standards for Lumbering Facilities
ONTP 02-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Woodworking Shops
ONTP 04-85: All-Union norms for technological design of timber transshipment enterprises
ONTP 04-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Shops of cold sheet metal stamping
ONTP 04-94: Sectoral norms of technological design of enterprises in the automotive industry. Shops of cold sheet metal stamping
ONTP 07-85: All-Union norms for the technological design of precast concrete enterprises
ONTP 07-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Foundries and warehouses of charge and molding materials
ONTP 09-85: All-Union norms of technological design of enterprises for the production of products from cellular and dense autoclaved concrete
ONTP 09-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Mechanical repair shops
ONTP 10-85: All-Union norms of technological design of production for the manufacture of products from metal powders based on iron and copper
ONTP 11-85: All-Union norms for technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling
ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)
ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops
ONTP 14-96 (II): Sectoral norms of technological design of enterprises in the automotive industry. Assembly shops
ONTP 16-86: All-Union standards for technological design of thermal areas, workshops, production facilities of enterprises of mechanical engineering, instrument engineering and metalworking
ONTP 1-85/Minstrojdormash: All-Union norms of technological design of engineering enterprises, instrument making metallo-processing. Metalwork shops (Stocking and welding production)
ONTP 444-86: National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components
ONTP 51-1-85: National Engineering Design Standards. Trunk Pipelines. Part I: Gas Pipelines
ONTP 5-78: Engineering Design Standards for Substations Operating at 35-750 kV Maximum Operating Voltage
ONTP 6-85: All-Union norms of technological design of warehouse complexes and mechanical repair shops of mines, mines and concentration plants of the mining industry
OST 290.004-02: Rules of air division product production design.
POT R M-011-2000: Intersectoral rules on labor protection in public catering
POT R M-013-2000: Industry-Wide Occupational Safety and Health Requirements for Chemical Cleaning and Washing
POT R M-014-2000: Intersectoral Occupational Safety Rules
POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures
POT R O-95120-001-94: Rules of labor protection at retailers
POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
R 466-82: Guidelines for conducting induction training on labor protection in organizations and enterprises of the Ministry of Oil and Gas Industry
RD 102-011-89: Occupational Safety and Health. Management and Procedural Documents
RD 102-61-87: Guidelines for certification, rationalization, accounting and planning of workplaces for drivers and maintenance workers at motor transport enterprises of the Ministry of Oil and Gas Construction
RD 153-12.2-003-99: Ensuring noise and vibration safety at coal enterprises
RD 153-34.0-02.105-98: Industry-Specific Guidelines for Ecological Feasibility Studies of Decisions Made During the Design of Thermal Power Stations and Boiler Plants
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
RD 153-39.4-113-01: Standards for technological design of main pipelines
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 31.3.05-97: Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.
RD 31.83.07-86: Occupational Safety and Health Management System - Recommended Practice for Reducing Noise Levels at Ship Repair Facilities Administered by the Ministry of the Merchant Marine
RD 34.03.501: Procedural Guidelines for Classification of Process Rooms of Electric Power Facilities According to Permissible Noise Levels
RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 39-0147103-314-88: Method of calculation and design of the system of vibration isolation of a block pumping station
RD 45.120-2000: Engineering standards. Urban and rural telephone networks. НТП 112-2000.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 82: Temporary norms and rules for the planning and development of the city of Moscow. Consolidated edition (not valid)
RND 73-45-89: Temporary design guide for fire alarm systems and people evacuation control in case of fire of facility of national economy
RSN 346-87: Production technology for plasterboard floor installation
RTP 37-87: Technological design guidelines for the repair and maintenance of agricultural equipment
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 1. Television
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 2. Broadcasting
Rules 2001: Rules for operation of technical means of television and radio broadcasting. Part 3. General safety requirements
SanPiN 2.1.1.012-99: Sanitary rules and regulations for the design of the construction of storage facilities for passenger individual vehicles in St. Petersburg
SanPiN 2.2.3.570-96: Hygienic Requirements for Coal Mining Industry and Organization of Work
SanPiN 2.3.4.004-97: Sanitary rules and regulations for mini-bakeries of St. Petersburg.
SanPiN 2.3.4.545-96: Production of bread, cakes and confectionaries
SanPiN 3077-84: Sanitary norms of permissible noise in residential and public buildings and in residential areas
SanPiN 4060-85: Medical Treatment Beaches. Sanitary Regulations for Organization, Equipment, and Operation
SanPiN 4396-87: Sanitary norms for permissible sound volume of sound reproducing and sound amplifying devices in enclosed spaces and in open areas
SanPiN 5047-89: Sanitary rules on occupational health for shoe enterprises
SanPiN 5146-89: Temporary sanitary and hygienic norms and rules for the device, equipment, content and operating mode on personal electronic computers and video display terminals in computer rooms and display classes of all types of secondary schools
SanPiN 5182-90: Sanitary rules for sewing production
SNiP 2.05.09-90: Tram and trolleybus lines
SNiP 23-03-2003: Noise protection
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SNiP 31-02-2001: Residental single-family houses
SNiP 32-01-95: Railroads with 1520-mm Track. Construction Norms and Regulations
SNiP 32-04-97: Railway and highway tunnels
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SP 119.13330.2011: Railways with 1520 mm track
SP 122.13330.2011: Railways and highway tunnels
SP 12-95: Instructions for the design of objects of internal affairs bodies (police) of the Ministry of Internal Affairs of Russia
SP 23-103-2003: Designing acoustic walling for residential and public buildings
SP 30-102-99: Planning and construction of low-rise housing construction territories
SP 31-103-99: Buildings, structures and complexes of orthodox churches
SP 31-105-2002: Design and construction of energy-efficient single-family houses with wooden frame
SP 35-114-2003: Reconstruction and adaptation of buildings for social service agencies aimed at older people
SP 4053-85: Sanitary Rules on the installation and operation of equipment for plasma treatment of materials
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 41-104-2000: Design of independent heat supply sources
SP 4542-87: Sanitary rules for livestock enterprises
SP 4783-88: Sanitary regulations for the production of synthetic polymeric materials and enterprises for their processing
SP 4950-89: Sanitary regulations for the production of carbon-based materials (coal, graphitized, fibrous, composite)
SP 55-101-2000: Fencing structures made with gypsum-cardboard sheets
SP 55-102-2001: Structures made with gypsum fiber sheets
ST RK 2068-2010: Motor roads of public use. General requirements General requirements
STN Ts 01-95: 1520-mm Gauge Railways
TR 12274-TI.2004: Thermal insulation products "Isover" of the grades KK-ALS, KT-11-TWIN, KIM-AL, KVM-50, KLS-K in the designs of thermal insulation of equipment and pipelines. Recommendations for use with technical solutions album
TSN 12-309-97 SO: Lightweight partitions
TSN 23-315-2000: Allowable Levels of Noise and Vibration and Soundproofing Requirements for Residential and Public Buildings
TSN 30-303-2000 MO: Planning and development of urban and rural settlements. Moscow region
TSN 30-304-2000: City of Moscow Planning and Development Code
TSN 30-307-2002: Design Standards for Integrated Site Improvements and Amenities in the City of Moscow
TSN 31-318-99: Buildings, Structures, and Building Complexes for Mortuary Purposes
TSN 41-301-99: Autonomous heat generating stations with gas small-sized heating units. Ryazan Oblast
TSN 41-302-2000: Heating, Ventilating, and Air-Conditioning Systems
TSN JeO 98: Territorial building codes for energy supply of new and reconstructed buildings and structures using autonomous and centralized heat supply systems. Moscow region
TSN PMS 97: Composition, procedure for the development, approval and approval of project documentation for individual low-rise housing construction in the Moscow region
TSN RK 97: Execution Procedures for Rehabilitation and Renovation of Residential Buildings of Early Mass Production Series and Public Utility Facilities in the Moscow Region
TU 5284-001-56506912-03: The panel is sound-absorbing and soundproof, noise-proof. Technical conditions
VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank
VNTP 01-87: Guidelines for Process Design of Pasta Industry Facilities
VNTP 04-94: Engineering Design Standards for Wine Bottling Plants
VNTP 10-79/Minavtoprom: Norms of technological design of metal-coating workshops of automobile industry plants
VNTP 10-91: Engineering Design Standards for Breweries
VNTP 11-93: Engineering Design Standards for Facilities for the Production of Barley Brewer's Malt
VNTP 17-5875-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Separate enterprises of metallurgical production. Volume 27. Coke-chemical enterprises
VNTP 20-86: Industry-Specific Engineering Design Standards for Ceramics Industry Facilities. Ceramic Plumbing Fixtures Manufacturing
VNTP 21-92: Standards for technological design of enterprises of the confectionery industry
VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)
VNTP 2-86: Engineering design standards for crude oil transmission pipelines
VNTP 36-92: Standards of technological design of enterprises of the food concentrate industry
VNTP 37-86: Standards for technological design of non-ferrous metallurgy mines with underground mining
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VNTP 40-91: Engineering Design Standards for Nonalcoholic Beverage Plants (Shops)
VNTP 81: Engineering Design Standards for Thermal Power Plants (VSN 29-81)
VNTP/MPS 85: Departmental norms of technological design. Devices of automation and telemechanics in railway transport.
VSN 41-96: Guidelines for Noise Control in Large-Panel Residential Buildings During Construction and Installation Practices
VSN 42-96: Guidelines for Technology for Sealing Windows, Shop Windows, and Other Structures Using Vulcanizing Sealants
VSN 52-86: Solar Units for Hot Water Supply. Design Standards
VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings
VSN 601-92: Allowable levels of noise at the telecommunication enterprises
VSN 61-89(r): Rehabilitation and Renovation of Residential Occupancies. Design Standards
VSN 8-89: Instruction for nature conservation in road construction, repair and maintenance
VSTP 6.01-92: Sanitary requirements for the design of dairy enterprises
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.