SNiP 41-01-2003
СНиП 41-01-2003
|
|
Heating, Ventilation and Air Conditioning (HVAC)
Отопление, вентиляция и кондиционирование
Status: The document is not up to date. The updated version of SP 60.13330.2012 "Heating, ventilation and air conditioning" is in force
Standards apply to heat supply, heating, ventilation and air conditioning systems in buildings and structures. The standards do not apply to the system: a) heating, ventilation and air conditioning shelters; facilities designed to work with radioactive substances, sources of ionizing radiation; underground mining facilities and premises in which explosives are produced, stored or used; b) special heating, cooling and dedusting installations and devices for technological and electrical equipment; aspiration, pneumatic conveying and dust and gas removal from the process equipment and vacuum cleaners.
Нормы распространяются на системы теплоснабжения, отопления, вентиляции и кондиционирования воздуха в помещениях зданий и сооружений. Нормы не распространяются на системы: а) отопления, вентиляции и кондиционирования воздуха убежищ; сооружений, предназначенных для работ с радиоактивными веществами, источниками ионизирующих излучений; объектов подземных горных работ и помещений, в которых производятся, хранятся или применяются взрывчатые вещества; б) специальных нагревающих, охлаждающих и обеспыливающих установок и устройств для технологического и электротехнического оборудования; аспирации, пневмотранспорта и пылегазоудаления от технологического оборудования и пылесосных установок.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
6/26/2003
SKU: RUSS19663
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
1. General for different areas of supervision »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
3 Workspace air »
3.2 Improvement of air environment and normalization of microclimate parameters »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.30 Ventilation and air conditioning systems »
The Document References:
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 24751-81: Air handling equipment. Nominal dimensions of connection's cross sections
GOST 30494-96: Residential and public buildings. Microclimate parameters for indoor enclosures
NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard
NPB 239-97: Ventilation Ducts. The test method for the fire resistance
NPB 241-97: Fire dampers of ventilation systems. The test method for the fire resistance
NPB 250-97: Fire fighting lifts. General technical requirements
NPB 253-98: The equipment of smoke control systems. Fans. The test method for the fire resistance
OND-86: Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions
SanPiN 2.1.2.1002-00: Sanitation and Disease Control Requirements for Residential Occupancies and Spaces
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
SNiP 23-02-2003: Buildings Heat Insulation
SNiP 23-03-2003: Noise protection
SNiP 31-01-2003: Multicompartment residential buildings
SNiP 31-03-2001: Production buildings
SNiP 31-05-2003: Public office buildings
SNiP 41-03-2003: Designing of thermal insulation of equipment and pipelines
The Document is Referenced By:
A231: Requirements for the construction part of working drawings of electrical rooms and cable structures of industrial enterprises
GOST 30494-2011: Residential and public buildings. Microclimate parameters for indoor enclosures
GOST 31829-2012: Ozonization equipment. Safety requirements
GOST 32548-2013: Ventilation for buildings. Air terminal devices. General specifications
GOST 34914-2022: Windows for industrial buildings. General technical conditions
GOST R 22.3.19-2022: Security in emergency situations. Temporary stationary accommodation facilities for the population affected in emergency situations. General requirements. Acceptance for use
GOST R 51829-2022: Gypsum fiberboard sheets and products based on them. Technical specifications
GOST R 52134-2003: Pressure thermoplastic pipes and their jointing elements for water-supply and heating systems. General specifications
GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application
GOST R 53301-2009: Fire dampers of ventilation systems. The test method for the fire resistance
GOST R 53630-2009: Pressure multilayer pipes for water-supply and heating systems. General specifications
GOST R 53630-2015: Multilayer pressure pipes for water supply and heating systems. General specifications
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 54389-2011: Stable gas condensate. Specifications
GOST R 54860-2011: Heat supply of buildings. General guidelines of methods for calculation of energy requirements and efficiencies for heat supply systems
GOST R 54865-2011: Heat supply of buildings. Method for calculation of energy requirements and efficiencies for of heat generation with heat pump systems
GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements
GOST R 54964-2012: Conformity assessment. Ecological requirements for estate properties
GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications
GOST R 55260.4.1-2013: Hydro power plants. Part 4-1. Hydroelectric power plants. The technological part hydroelectric power plants and pumped storage plants. General specifications
GOST R 55441-2013: Inland water transport. Operation of cargo transfer complexes and passenger terminals of river ports. General safety requirements
GOST R 55732-2013: Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications
GOST R 57407-2017: Carbon fibers. General technical requirements and test methods
GOST R 57618.3-2017: Small craft infrastructure. Yacht harbours. Exploitation. Safety requirement
GOST R 59972-2021: Ventilation and air conditioning systems for public buildings. Technical requirements
GOST R 59976-2021: Mobile complexes with swimming pools. General technical conditions
GOST R 70217-2022: Exhibition and congress venues. Basic requirements
GOST R 70346-2022: "Green" standards. Multifamily residential "green" buildings. Evaluation methodology and criteria for design, construction and operation
GOST R 70517-2022: Hydrometallurgical plants of uranium mining enterprises. Norms of technological design
GOST R 70726-2023: Modular swimming pools. General technical conditions
GOST R 8.932-2017: State system for ensuring the uniformity of measurements. Requirement to methodologies (to the methods) of measuring in area of uses of nuclear-power. Substantive provisions
KPO 06.08.10-06: Catalog-list of equipment. Stop valves Special valves for ventilation systems
Letter 10279-OG/16: On the direction of the letter FAU "FTS" from 17.05.2022 N Ex-2949
Letter Ish-1328: About the presence of a typo in SP 60.13330.2020
Letter Ish-2949: On the application of the provisions of SP 60.13330.2020
Manual for MR 23-345-2008: Standards of the energy passport and the section "Energy Efficiency" for residential, public and mixed buildings (manual to MP 23-345-2008)
MDK 2-04.2004: Methodological manual for the maintenance and repair of housing
MDS 31-10.2004: Recommendations on the planning and maintenance of buildings, structures and complexes for funeral purposes
MDS 31-13.2007: Design guidelines for the safety and comfort of industrial buildings
MDS 35-11.2004: Development of environment for work activity of low-mobile groups of people at industrial enterprises
MGSN 4.06-03: Educational institutions. Moscow
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MGSN 5.02-99: Design of Urban Bridge Structures
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
MR 23-345-2008 UR: Guidelines for the design of thermal protection of residential and public buildings
MRR 3.2.19.02-05: Guidelines for determining the cost of designing fire protection and alarm systems
MRR 3.2.19.03-09: Method for determining the cost of designing fire protection and alarm systems, carried out with the involvement of the budget of the city of Moscow
MRR 3.2.69.02-12: The collection of basic prices for design work for the construction of the metro in the city of Moscow, carried out with the involvement of the budget of the city of Moscow
MRR 3.2.69-09: Collection of basic prices for design work for the construction of the metro in the city of Moscow
MRR 3.2.79-13: Method for determining the cost of designing the section "Fire Safety Measures" and the cost of designing fire protection and burglar alarm systems carried out with the involvement of the Moscow budget funds
MU 2.6.1.037-2015: Determination of average annual values of EES of radon isotopes in indoor air from measurements of different duration
NTP 1.30.03.02-06: Norms of technological design of irrigation systems using waste water
NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry
NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry
NTP-APK 1.10.09.002-04: Standards of technological design of complexes for the cultivation of champignons
NTP-APK 1.10.09.003-04: Norms of technological design of oyster mushroom growing complexes
NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry
ODM 218.2.074-2016: Guidelines for the use of structural composite anchors for the device of transverse and longitudinal expansion joints instead of steel anchor rods in hard type coatings
ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
OSGiSPPiN: National Sanitation and Hygiene Regulations and Sanitation and Disease Control Regulations. Sanitary Regulations for Asbestos Handling
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
PNST 790-2022: Engineering networks of buildings and structures internal. Axial bellows compensators for pipelines of heating, heating and water supply systems. General specifications
POT RZhD 4100612-CT-613-2015: Temporary rules on labor protection during the operation of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
POT RZhD-4100612-TsT-025-2012: Rules for labor protection during operation of locomotives of Russian Railways
PPBO 112-76: Rules of fire safety at the facilities of the Ministry of Communications of the USSR
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
RD 12-VEP: Methods of conducting technical audits of existing centralized heat supply systems (RC audit of the Center)
RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions
RD 52.10.728-2010: Basic requirements for the competence of laboratories in monitoring the status and pollution of sea water. State Oceanographic Institute (GOIN)
RD EO 1.1.2.09.0772-2008: Methods of assessing the technical condition and resource characteristics of systems and means of fire protection of nuclear power units
RD-APK 1.10.01.02-10: Guidelines for technological design of farms and cattle complexes
RD-APK 1.10.01.03-12: Guidelines for the technological design of farms and cattle farms (farms)
RD-APK 1.10.02.04-12: Guidelines for technological design of pig farms and complexes
RD-APK 1.10.03.01-11: Guidelines for technological design of goat farms and complexes
RD-APK 1.10.03.02-12: Guidelines for the technological design of sheep facilities
RD-APK 1.10.07.01-12: Methodical recommendations on the technological design of veterinary facilities for livestock, animal, poultry and peasant (farmer) farms
RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants
RD-APK 1.10.08.01-10: Guidelines for technological design of beekeeping objects
RD-APK 3.10.07.02-09: Guidelines for the maintenance of laboratory animals in vivariums of research institutes and educational institutions
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 1062-PP: Energy efficiency of residential and public buildings. Standards for energy consumption and thermal protection
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 30-23-2014 Sankt-Peterburg: Guidance on the design of engineering preparation of the territory, engineering networks and improvement of residential and public business neighborhoods
RMD 31-03-2008 Sankt-Peterburg: Recommendations for the design of buildings of hotel enterprises, motels and campgrounds in St. Petersburg
RMD 31-07-2009 Sankt-Peterburg: Guidelines for the design of preschool educational institutions in St. Petersburg
RMD 31-10-2011 Sankt-Peterburg: Guidelines for the design of pre-school educational institutions (including classes with compensatory education)
RMD 31-15-2012 Sankt-Peterburg: Design Guide for Special (Corrective) Educational Institutions for Students and Pupils with Disabilities
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities
SNiP 21-03-2003: Forest material storages. Fire regulations
SNiP 23-02-2003: Buildings Heat Insulation
SNiP 31-01-2003: Multicompartment residential buildings
SNiP 31-02-2001: Residental single-family houses
SNiP 31-05-2003: Public office buildings
SNiP 31-06-2009: Public buildings and constructions
SNiP 32-02-2003: Subways
SP 114.13330.2011: Forest material storages. Fire regulations
SP 117.13330.2011: Public office buildings
SP 118.13330.2011: Public buildings and works
SP 120.13330.2011: Subways
SP 120.13330.2012: Subway systems
SP 124.13330.2012: Heating networks
SP 226.1326000.2014: Power supply of not traction consumers. Rules for design, construction and renovation
SP 23-101-2004: Design of thermal protection of buildings
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 31-107-2004: Architectural and planning designs of apartment buildings
SP 31-109-2003: Buildings of arbitration courts
SP 31-112-2004: Gyms and sports facilities, (Parts 1 and 2)
SP 31-112-2007: Athletic and sports halls. Part 3: Indoor ice arenas
SP 31-113-2004: Swimming pools
SP 31-115-2008: Outdoors sports and leisure facilities. Part 3. Ski sports
SP 32-105-2004: Subways
SP 35-112-2005: Boarding schools
SP 35-115-2004: Construction of facilities at institutions of social and medical services for the elderly
SP 35-117-2006: Orphanages for children with disabilities
SP 40-108-2004: Design and installation of domestic water and heating systems of buildings with copper pipes. Amended, published in BST №1, 2004.
SP 41-108-2004: Apartment heating of residential buildings with heat generators on gas fuel
SP 41-109-2005: Design and installation of domestic water and heating systems in buildings using tubes of "cross-linked" polyethylene
SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations
SP 55.13330.2011: Sindle-family houses
SP 55-103-2004: Structures made with the gypsum partition plates
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
SP 73.13330.2012: Internal sanitary-technical systems
SP 98.13330.2012: Tram and trolleybus lines
ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements
ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements
ST TsKBA 106-2011: Pipe fittings. Oxidation of titanium alloy parts
TMD Sankt-Peterburg 21-606-2005: Guidelines for ensuring fire safety in the design, construction and operation of gas stations in St. Petersburg
TR SPI 03-2009: Exterior wall panels with an INSI thermoprofile frame with external “Aquapanel” exterior-facing cement and mineral slabs for low-rise buildings for various purposes. Materials for design and working drawings of nodes
TSN 13-302-2004: Repair and technical re-equipment of residential buildings of the first mass series in St. Petersburg
TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards
TSN 23-349-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Samara Region
TSN 23-350-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Vologodskaya Oblast
TSN 31-329-2004: Retailers. Design Standards. Ivanovo region
TSN 31-330-2005: Treatment and prevention institutions in St. Petersburg
TSN 31-332-2006: Residential and public high-rise buildings
TSN 41-306-2003: Thermal Insulation of Pipelines for Various Purposes. City of Moscow
TSN 41-310-2004: Apartment heating systems from gas-fired heat generators. Kursk region
TSN 41-311-2004 MO: Autonomous heat sources
TSN 41-312-2004 MO: Individual apartment heating system based on double-circuit gas boilers with a closed combustion chamber
VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.