GOST 12.2.052-81

ГОСТ 12.2.052-81

Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

Система стандартов безопасности труда. Оборудование, работающее с газообразным кислородом. Общие требования безопасности

Status: Effective - Introduced for the first time. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 1045 dated 03.30.87

The standard applies to agricultural tractors, including tractor self-propelled chassis, industrial modifications of agricultural tractors of traction classes from 0.6 and more, and self-propelled agricultural machines. The standard establishes general requirements that ensure labor safety when using tractors and machines for the intended purpose, maintenance, repair, transportation and storage, and general ergonomic requirements for the operator’s workplace. The standard does not apply to mobile means of small-scale mechanization of agricultural work.

Стандарт распространяется на оборудование, предназначенное для работы с газообразным кислородом по ГОСТ 5583 или газовыми смесями, объемная доля кислорода в которых более 23 %, под давлением до 42,0 МПа (420 кгс/см кв.) при температуре до 200 ° C, и устанавливает общие требования по обеспечению взрыво- и пожаробезопасности на стадиях проектирования, изготовления, монтажа, эксплуатации и ремонта. Стандарт не распространяется на оборудование, работающее со смесями кислорода с горючими и окисляющими газами, а также на трубопроводы для газовых смесей с объемной долей кислорода до 40 % и давлением до 0,6 МПа (6 кгс/см кв.).

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 36

Approved: USSR State Committee for Standards, 1/30/1981

SKU: RUSS19666

Price: $517.08




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.6 For cryogenic media »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.5 For chemical, petrochemical and related industries »

Standards for pipe fittings (TPA) » 1. Fundamental standards for injection molding machines » 1.3 Reliability and safety »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.2 Operation of production machines and equipment »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.30 Welding equipment »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.30 Welding equipment »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »

National Standards for OKSTU » CHEMICAL AND PETROLEUM ENGINEERING » Rules for acceptance, use, operation and repair. Safety engineering »

National Standards for OKSTU » CHEMICAL AND PETROLEUM ENGINEERING » Oxygen, cryogenic equipment »


The Document References:

GOST 10007-80: Polytetrafluoroethylene. Specifications

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10727-91: Unidirectional glass threads. Specifications

GOST 10832-91: Expanded pearlite sand and crushed stone. Specifications

GOST 10994-74: Precision alloys. Grades.

GOST 111-2001: Flat glass. Specifications

GOST 111-90: Polished glass. Specifications

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.4.026-76: Signal colors and safety signs

GOST 12652-74: Electrotechnical glass-cloth-base laminate. Specifications

GOST 12707-77: Wash primers. Specifications

GOST 12871-93: Chrysotile asbestos - chrysotile. General specifications

GOST 13489-79: Sealants, marks У-30M and УТ-31. Specifications

GOST 13744-87: Fluoroplast-3. Specifications

GOST 14613-83: Fibreboard. Specifications

GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 17478-95: Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications

GOST 17622-72: Industrial organic plastic. Specifications

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 1779-83: Asbestos cord

GOST 18175-78: Tin-free pressure-worked bronzes. Grades

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19337-73: VNII NP-274 grease

GOST 20437-89: Moulding material AГ-4. Specifications

GOST 20836-75: Technical leather. Specifications

GOST 23844-79: Khladon 113. Specifications

GOST 26358-84: Pig iron castings

GOST 2850-95: Asbestos paperboard

GOST 380-2005: Common quality carbon steel. Grades

GOST 4543-71: Structural alloyed steel

GOST 4640-93: Mineral wool. Specifications

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications

GOST 492-2006: Nickel, nickel and copper-nickel alloys treated by pressure. Grades

GOST 493-79: Tin-free foundry bronzes. Grades

GOST 5017-2006: Wrought tin bronzes. Grades

GOST 5152-84: Gland Packing Specifications

GOST 5539-73: Litharge. Specifications

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5-78: Constructive textile and asbestos laminates. Specification

GOST 5971-78: Enamels for instruments. Specifications

GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications

GOST 6631-74: Enamels НЦ-132. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 6824-76: Distilled glycerine. Specifications

GOST 6824-96: Distilled glycerin

GOST 7338-90: Rubber and rubber-fabric sheets. Specifications

GOST 859-2001: Copper. Grades

GOST 859-78: Copper. Grades

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications

GOST 9639-71: Sheets from unplasticized polyvinylchloride (sheet vinyplast). Specifications

GOST 9968-86: Methylene dichloride technical. Specifications

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

NPB 105-95: Determination of Rooms and Buildings Categories on Explosion and Fire Hazard

PB 03-517-02: Regulations for Organizations Executing Activity in the Field of Industrial Safety at Hazardous Production Facilities

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries

PB 11-493-02: General safety rules for metallurgical and by-product-coke plants and manufactures

PB 11-544-03: Safety Rules for Production and Consumption of Air Separation Products

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 13861-89: Pressure regulators for the flame machining

GOST 28617-90: Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control

GOST 31512-2012: Medical monoplaced fixed barochambers. General technical requirements

GOST 31829-2012: Ozonization equipment. Safety requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 5191-79: Injector cutting torches for manual oxygen cutting

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST R 51316-99: Medical monoplaced fixed barochambers. General technical requirements

GOST R 51706-2001: Ozonisation equipment. Safety requirements

GOST R 52264-2004: Pressure diving chambers. General specifications

GOST R 53263-2019: Fire fighting equipment. Compressor plants for filling compressed air and oxygen cylinders of breathing apparatus for firefighters. General technical requirements. Test methods

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54791-2011: Gas welding equipment used in welding, cutting and allied processes. Pressure regulators and pressure regulators with flow-metering devices for manifold systems and gas cylinders up to 300 bar (30 МРа)

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements

GOST R 57528-2017: Equipment for diving. Diving breathing apparatus with a half breath scheme. General technical requirements

GOST R 57530-2017: Medical equipment for hyperbaric chambers under pressure. General technical requirements

GOST R 8.776-2011: State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas Mixtures. General metrological and technical requirements

GOST R 8.918-2016: State system ensuring the uniformity of measurements. Reference materials refinery gases. General metrological and technical requirements

MI 2353-95: State system for ensuring uniformity of measurements. Calorimeter gas automatic model 66. Calibration method

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MR 1.2.0022-11: Sampling procedure for nanomaterials control

MU 1.2.2740-10: Sampling procedure for identifying, identifying and characterizing the action of nanomaterials in aquatic invertebrates

MU 1.2.2741-10: Sampling procedure for the identification and identification of nanomaterials in laboratory animals

MU 1.2.2745-10: Sampling procedure for characterizing the action of nanomaterials on laboratory animals

OMU 42-21-26-88: Departments of hyperbaric oxygenation, rules of operation and repair

ORD 14.370-44-87: Guidelines for the design of oxygen facilities in metallurgical plants

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-04-2153-77: Labour safety standard system. Cryogenic equipment. General safety requirements and constructions.

OST 26-04-2158-78: Occupational safety standards system. Consumption and pressure measuring equipment. Safety requirements at application in the gas oxygen medium.

OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.

OST 290.004-02: Rules of air division product production design.

PB: Safety regulations and industrial sanitation for loading and unloading operations on railway transport

PB: Safety regulations and industrial sanitation for the repair and maintenance of railway tracks and structures

POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals

POT R O 00030171: Labor protection rules during the operation of navigable hydraulic structures

PPB AS-95: Fire safety regulations for the operation of nuclear power plants

PPB-AS 2011: Technical documentation. Fire safety regulations for the operation of nuclear power plants

RD 153-34.0-37.411-2001: Procedural Guidelines for In-Service Steam-Oxygen Cleaning and Passivation of Inner Surfaces of Power Generating Equipment

RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.

SNiP 31-06-2009: Public buildings and constructions

SP 158.13330.2014: Buildings and rooms for health care facilities. Design rules

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions

ST TsKBA 046-2007: Pipe fittings. Degreasing methods

ST TsKBA 054-2008: Pipe fittings. Construction materials for parts of pipeline valves operating in corrosive environments. Technical requirements

TU 3645-002-16989527-99: PKN-03 Cutter for manual oxygen cutting

TU 5728-006-93978201-2008: Sealing gaskets made of thermally expanded graphite (PUTG). Technical conditions

TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT

VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines

VSN 362-87: Disinfections and Etching of Pipelines

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Noxious substances. Classification and general safety requirements
Language: English
Price: $32.67
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Language: English
Price: $233.64
Manufacturing and quality control of steel structures for construction
Language: English
Price: $183.15
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Steel structures
Language: English
Price: $594.00
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!