GOST 22790-89
ГОСТ 22790-89
|
|
Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
Сборочные единицы и детали трубопроводов на ру св. 10 до 100 МПа (св. 100 до 1000 кгс/см2)
Status: Not effective - Canceled in the Russian Federation. Registration information 891-st dated September 6, 2013 (official website of Rosstandart)
The standard applies to assembly units and pipeline parts according to GOST 22791 - GOST 22826 and establishes requirements for the petrochemical and mineral fertilizer industries.
Стандарт распространяется на сборочные единицы и детали трубопроводов по ГОСТ 22791 - ГОСТ 22826 и устанавливает требования для производств нефтехимической промышленности и промышленности по производству минеральных удобрений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
6/23/1989
SKU: RUSS19673
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
National Standards for OKSTU »
CHEMICAL AND PETROLEUM ENGINEERING »
Complete technological lines, installations and units »
As a Replacement Of:
GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications
The Document References:
GOST 10006-80: Metal pipes
GOST 10198-78: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10354-82: Polyethylene film Specifications
GOST 1050-74: High-grade constructional carbon steel
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase
GOST 14140-81: Basic norms of interchangeability. Position tolerances of bore axes for fasteners
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 1497-84: Metals. Methods of tension test
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16295-82: Packing anticorrosive paper. Specifications
GOST 16295-93: Anticorrosion paper
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 2.601-95: Operational documents
GOST 20072-74: Heat-resistant steel
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21140-75: Package. System of dimensions
GOST 21140-88: Containers
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 22241-76: Transportation plugs. General specifications
GOST 22791-83: Assembly units and pipeline parts. Dead lenses with indicator for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22792-83: Assembly units and pipeline parts. Unions for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22793-83: Assembly units and pipeline parts. Bend arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22794-83: Assembly units and pipeline parts. Flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22795-83: Assembly units and pipeline parts. Abutment and flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22796-83: Assembly units and pipeline parts. Unequal flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22797-83: Assembly units and pipeline parts. Abutment for bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22798-83: Assembly units and pipeline parts. Flanged double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22799-83: Assembly units and pipeline parts. Flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22800-83: Assembly units and pipeline parts. Armed and flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22801-83: Assembly units and pipeline parts. Flanged reducing and open branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22802-83: Assembly units and pipeline parts. Flanged and armed open T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22803-83: Assembly units and pipeline parts. Flanged asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22804-83: Assembly units and pipeline parts. Flanged reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22805-83: Assembly units and pipeline parts. Flanged inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22806-83: Assembly units and pipeline parts. Flanged fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22807-83: Assembly units and pipeline parts. Flanged lens metering diaphragms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions
GOST 22808-83: Assembly units and pipelines parts. Flanged lens arms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions
GOST 22809-83: Assembly units and pipeline parts. Flanged lenses with two arms for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions
GOST 22810-83: Assembly units and pipeline parts. Pocket angles for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22811-83: Assembly units and pipeline parts. Arms for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22812-83: Assembly units and pipeline parts. Pockets for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22813-83: Assembly units and pipeline parts. Reducing flanges for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22814-83: Assembly Units and Pipeline Parts. Armed reducing flanges. For Pn above 10 to 40 МPа
. ( above 100 tо 400 кgf/сm2)
GOST 22815-83: Assembly units and pipeline parts. Flanged plugs for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22816-83: Assembly units and pipeline parts. Flanged plugs with inserts for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions
GOST 22817-83: Assembly units and pipeline parts. Flanged bent arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22818-83: Assembly units and pipeline parts. Elbow bends with abutments for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22819-83: Assembly units and pipeline parts. Double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22820-83: Assembly units and pipeline parts. Angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22821-83: Assembly units and pipeline parts. Armed angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22822-83: Assembly units and pipeline parts. Reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22823-83: Assembly units and pipeline parts. Open armed T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22824-83: Assembly units and pipeline parts. Asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22825-83: Assembly units and pipeline parts. Inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22826-83: Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 4543-71: Structural alloyed steel
GOST 515-77: Bitumized and tarred packaging paper
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 6032-84: Steels and alloys, corrosion-resistant. Methods for determination of resistance against intergranular corrosion
GOST 7505-74: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9150-81: Basic norms of interchangeability. Metric screw thread. Profile
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
SNiP 3.05.05-84: Processing equipment and process pipelines
The Document is Referenced By:
GOST 22791-83: Assembly units and pipeline parts. Dead lenses with indicator for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22792-83: Assembly units and pipeline parts. Unions for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22793-83: Assembly units and pipeline parts. Bend arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22794-83: Assembly units and pipeline parts. Flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22795-83: Assembly units and pipeline parts. Abutment and flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22796-83: Assembly units and pipeline parts. Unequal flanged elbow bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22797-83: Assembly units and pipeline parts. Abutment for bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22798-83: Assembly units and pipeline parts. Flanged double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22799-83: Assembly units and pipeline parts. Flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22800-83: Assembly units and pipeline parts. Armed and flanged angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22801-83: Assembly units and pipeline parts. Flanged reducing and open branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22802-83: Assembly units and pipeline parts. Flanged and armed open T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22803-83: Assembly units and pipeline parts. Flanged asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22804-83: Assembly units and pipeline parts. Flanged reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22805-83: Assembly units and pipeline parts. Flanged inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22806-83: Assembly units and pipeline parts. Flanged fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22807-83: Assembly units and pipeline parts. Flanged lens metering diaphragms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions
GOST 22808-83: Assembly units and pipelines parts. Flanged lens arms for Pnom 9,81-63 MPa (100-630 kgf/sm sq). Construction and dimensions
GOST 22809-83: Assembly units and pipeline parts. Flanged lenses with two arms for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions
GOST 22810-83: Assembly units and pipeline parts. Pocket angles for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22811-83: Assembly units and pipeline parts. Arms for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22812-83: Assembly units and pipeline parts. Pockets for resistance thermometers and thermocouple thermometers for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22813-83: Assembly units and pipeline parts. Reducing flanges for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22814-83: Assembly Units and Pipeline Parts. Armed reducing flanges. For Pn above 10 to 40 МPа
. ( above 100 tо 400 кgf/сm2)
GOST 22815-83: Assembly units and pipeline parts. Flanged plugs for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22816-83: Assembly units and pipeline parts. Flanged plugs with inserts for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions
GOST 22817-83: Assembly units and pipeline parts. Flanged bent arms for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22818-83: Assembly units and pipeline parts. Elbow bends with abutments for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22819-83: Assembly units and pipeline parts. Double bends for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22820-83: Assembly units and pipeline parts. Angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22821-83: Assembly units and pipeline parts. Armed angles for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22822-83: Assembly units and pipeline parts. Reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22823-83: Assembly units and pipeline parts. Open armed T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22824-83: Assembly units and pipeline parts. Asymmetric reducing T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22825-83: Assembly units and pipeline parts. Inserting T-branches for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 22826-83: Assembly units and pipeline parts. Fillets for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications
IM 14-51-00: Guidelines and explanations on topical issues of creating automation systems. Release 4. New standard drawings of the Montazhavtomatika association
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
Manual: Manual for impulse and low consumption fire extinguishing systems
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.
OST 26-01-136-81: Assembling units of steel pipelines on pressure over 9,81 to 98,1 MPa (over 100 to 1000 kgf/cm2) of complete technological lines. General specifications.
OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
PB 03-108-96: Process pipeline design and safe operation rules
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 22-207-88: Lifting machines. General requirements and production standards
RD 26.260.007-92: Pipelines and pipeline parts for pressure of 250 MPa (2500 kgf/cm2) of polyethylene production. Basic technical requirements, certification, operation and repair
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 36-62-00: Hoisting equipment. General technical requirements.
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.