imgalt

GOST 16337-77

ГОСТ 16337-77

High-pressure polyethylene. Specifications

Полиэтилен высокого давления. Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to high-pressure polyethylene (low density), obtained by polymerization of ethylene at high pressure in tubular reactors and reactors with a stirrer using radical-type initiators, and establishes requirements for high-pressure polyethylene manufactured for the needs of the national economy and export. The standard does not apply to polyethylene compositions for the cable industry.

Стандарт распространяется на полиэтилен высокого давления (низкой плотности), получаемый полимеризацией этилена при высоком давлении в трубчатых реакторах и реакторах с перемешивающим устройством с применением инициаторов радикального типа, и устанавливает требования к полиэтилену высокого давления, изготовляемому для нужд народного хозяйства и экспорта. Стандарт не распространяется на композиции полиэтилена для кабельной промышленности.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 10/11/1977

SKU: RUSS19687

Price: $637.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.2 Polymer and composite materials »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.080 Plastics » 83.080.20 Thermoplastic materials »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.080 Plastics » 83.080.20 Thermoplastic materials »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L27 Artificial resins and fiber, plastics and plasticizers »


The Document is Replaced With:

GOST 16337-2022: High-pressure polyethylene. Technical specifications

As a Replacement Of:

GOST 16337-70: Low density polyethylene (high pressure)

GOST 5.1308-72: Low density polyethylene (high pressure). Quality requirements for certified products

The Document References:

GOST 11262-80: Plastics. Tensile strength test method.

GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12019-66: Plastics. Preparation of test specimens from thermoplasts. General requirements

GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens

GOST 1338-78: Organic dye-stuffs. Orange lacquer. Specifications

GOST 13518-68: Plastics. Method for determination of environmental stress-cracking resistance of polyethylene

GOST 14192-77: Marking of cargoes

GOST 14192-96: Cargo marking

GOST 14919-83: Household electric ranges, electric plates and electric frying ovens

GOST 15139-69: Plastics. Methods for the determination of density (mass density)

GOST 16782-92: Plastics. Determination of the brittleness temperature by impact

GOST 17711-93: Cast copper-zink alloys (brass). Grades

GOST 17811-78: Polyethylene bags for chemical products. Specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 2226-88: Paper bags

GOST 22372-77: Dielectric materials. Methods of determination of permittivity and power factor with in a frequency range of 100 to 5·10 in 6 degree Hz

GOST 22648-77: Plastics. Methods for determination of hygienic characteristics

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 25706-83: Magnifiers

GOST 26311-84: Polyolefins. Method of determination of black content

GOST 26359-84: Polyethylene. Method for determination of volatile matters content

GOST 26380-84: Special groupage containers. Types, basic parameters and dimensions

GOST 26393-84: Polyethylene. Method for determination of extractable substances content by diethyl ether

GOST 2912-79: Chrome oxide technical. Technical conditions

GOST 5494-95: Pigmentary aluminium. Specifications

GOST 618-73: Aluminum foil for technical purposes. Specifications

GOST 6220-76: Organic dye-stuffs. Pigment blue phthalocyanine. Specifications

GOST 6433.1-71: Solid electrical insulating materials. Environmental conditions at preparation of samples and testing

GOST 6433.3-71: Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage

GOST 7436-74: Organic dye-stuffs. Lacquer ruby CK. Specifications

GOST 7730-89: Cellulose film

GOST 7885-86: Industrial carbon for production of rubber

GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications

GOST 8573-77: Organic dye-stuffs. Lacquer red ЖБ. Specifications

GOST 9808-84: Pigmentary titanium dioxide

GOST 982-80: Transformer oils

The Document is Referenced By:

GKINP 15-236-91: Instructions for printing processes in kartoizdaniya

GOST 10296-79: Isol-hydroinsulating material. Specifications

GOST 10354-82: Polyethylene film Specifications

GOST 11125-84: Super pure nitric acid. Specifications

GOST 12138-86: Diphenylolpropane for industrial use. Specifications

GOST 12217-66: Holding devices. Plugs for lubrication holes. Design

GOST 12583-67: Plain rye bread with long shelf-life preserved with application of heat stage sterilization

GOST 13534-2015: Meat and meat containing cans. Packing, marking and transportation

GOST 14022-88: Anhydrous hydrogen fluoride

GOST 15062-83: W.c. bowl seats. Specifications

GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications

GOST 16295-2018: Anticorrosive paper. Specifications

GOST 16295-82: Packing anticorrosive paper. Specifications

GOST 16324-83: Cast iron diaphragm control valves with pneumatic diaphragm actuator

GOST 16337-2022: High-pressure polyethylene. Technical specifications

GOST 16360-70: Asbestic textolite Electrotechnical sheet. Specification

GOST 17000-71: Packaging consumer, of polymers, for lubricants. Specification

GOST 17147-80: Fuel TG-02. Specifications

GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods

GOST 177-88: Hydrogen peroxide

GOST 17811-78: Polyethylene bags for chemical products. Specifications

GOST 18325-80: Laboratory furniture for operation with radioactive substances. General requirements

GOST 18481-81: Glass hydrometers and cylinders. General specifications

GOST 18599-2001: Polyethylene pressure pipes. Specifications

GOST 18599-83: Polyethylene pressure pipes

GOST 19360-74: Film liner-bags. General specifications

GOST 19671-91: Tungsten wire for light sources

GOST 19681-83: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

GOST 20292-74: Laboratory volumetric glassware. Burettes, pipettes

GOST 20335-74: Radiators, heating, of steel, panel type

GOST 20477-75: Polyethylene tape with adhesive layer

GOST 2056-77: Sectional bed for military men. Specifications

GOST 20-85: Rubber-fabric conveyor belts

GOST 21133-75: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds. Specification

GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds

GOST 21479-87: Case for stitching of operation and repair documentation. Construction

GOST 21485.0-76: Flushing tanks with accessories. Technical requirements and test methods

GOST 22241-76: Transportation plugs. General specifications

GOST 22498-88: Local telephone cables with polyethylene insulation and plastic sheath.

GOST 22524-77: Glass density bottles. Specifications

GOST 22689.0-77: Plastic sewage pipes and shaped parts for them. General technical requirements and test methods

GOST 22689.0-89: Polyethylene waste-pipes and fittings. General specification

GOST 22689.2-89: Polyethylene waste-pipes And related shaped parts. Construction

GOST 22982-78: Electrochemical paper

GOST 22999-88: Portable hand-driven sprayers

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23289-78: Waste water drain sanitary accessories. General technical requirements

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23621-79: Cow dry skim milk for export. Specifications

GOST 23651-79: Canned milk products. Packing and marking

GOST 24095-80: Stop valves with diaphragm of cast-iron. Specification

GOST 24463-80: Polymer barrels. General specifications

GOST 24508-80: Food concentrates. Packing, marking, transportation and storage

GOST 25013-81: Electrochemical impulse paper

GOST 25047-87: Complete exfusion, infusion and transfusion devices of the single application

GOST 25377-2015: Needles for injections for repeated use. Specifications

GOST 25645.331-91: Polymeric materials. Requirements for radiation resistance estimation

GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications

GOST 25812-83: Steel pipe mains. General requirements for corrosion protection

GOST 25821-83: Fluid PGV. Specifications

GOST 25930-83: Plastic covers for cylindrical connectors. Specifications

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26584-85: Motorcycle helmets

GOST 27133-86: Reeled electrical insulating laminated materials

GOST 27168-86: Flour for infant formula products

GOST 28179-89: Paprin, the nutrient yeast

GOST 28638-90: Bristle brush articles for household use. General specifications

GOST 2910-74: Electrotechnical flat-sheet laminate. Specifications

GOST 30625-98: Liquid and past dairy products for babys food. General specifications

GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST 31569-2012: Corrosion-resistant (stainless) steel billets for cast dentures of orthopedic dentistry. General specifications

GOST 31570-2012: Nickel-base alloy billets for orthopedic dentistry. General specifications

GOST 31627-2012: Corrosion-resistant cobalt-base alloy billets for orthopedic stomatology. General specifications

GOST 31805-2012: Products bakery from wheat flour. General specifications

GOST 31946-2012: Insulated and protected wires for overhead power lines. General specifications

GOST 32686-2022: Polyethylene terephthalate bottles for edible liquids. General specifications

GOST 32736-2014: Consumers’ package from combined materials. General specifications

GOST 33118-2014: Combined materials on basis of aluminium foil. Specifications

GOST 33144-2014: Public roads. Road mirrors. Technical specifications

GOST 33504-2015: Food additives. Dihydroquercetin. Specifications

GOST 33567-2015: Lactose. Specifications

GOST 33746-2016: Returnable polymeric boxes. General specifications

GOST 33837-2016: Polymeric packaging for food products. General specifications

GOST 33837-2022: Polymeric packaging for food products. General technical conditions

GOST 33958-2016: Canned milk. Whey powders. Specifications

GOST 34264-2017: Polymeric transport containers. General specifications

GOST 34405-2018: Metal prefabricated cans. General specifications

GOST 34534-2019: Packaging. Polymer bottles for food liquids. General specifications

GOST 34577-2019: Pallets for cargo. Laying sheets for pallets. General specifications

GOST 34835-2022: Specialized food products. Gluten-free bakery products. General specifications

GOST 34836-2022: Specialized food products. Bakery products for baby food on the basis of wheat flour. Technical conditions

GOST 3927-88: The shoe lasts. Specifications

GOST 5692-73: Organic dyes. Lacquer bordeaux CK. Specifications

GOST 5799-2022: Flasks for paints and varnishes. Specifications

GOST 5799-78: Flasks for paints and varnishes. Specifications

GOST 6823-2000: Crude natural glycerine. General specifications

GOST 6980-76: Accumulator ebonite monoblocks for autocars, autobuses and tractors. Specifications

GOST 7247-90: Automatic food packaging paper

GOST 7436-74: Organic dye-stuffs. Lacquer ruby CK. Specifications

GOST 8573-77: Organic dye-stuffs. Lacquer red ЖБ. Specifications

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9.602-89: Constructions, underground. General requirements for corrosion protection

GOST 9.703-79: Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods

GOST 9338-2022: Plywood drums. Technical specifications

GOST 9338-80: Plywood drums. Specifications

GOST 975-88: Crystalline dextrose hydrate. Specifications

GOST 9933-75: Absolute pressure gauges and u-tubes combined pressure vacuum gauges

GOST R 50291-92: 1,1,2,2,-tetrafluorodibromethane (Khladon 114B2). Specifications

GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection

GOST R 51268-99: Scissors. General specifications

GOST R 51289-99: Returnable polymeric boxes. General specifications

GOST R 51381-99: Corrosion-resistant cobalt-base alloy billets for orthopaedic stomatology. General specifications

GOST R 51720-2001: Polymeric sacks. General specifications

GOST R 51760-2001: Polymeric consumers packagings. General specifications

GOST R 51767-2001: Nickel-base alloy billets for orthopaedic dentistry. General specifications

GOST R 52101-2003: Vinegars of food raw material. General specifications

GOST R 52145-2003: Combined materials on basis of aluminium foil. Specifications

GOST R 52462-2005: Products bakery from wheat flour. General specifications

GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST R 52579-2006: Consumers package from combined materials. General specifications

GOST R 52620-2006: Transport polymeric containers. General specifications

GOST R 52683-2006: Medicine remedies for veterinary use. Packing, marking, transportation and storage

GOST R 53129-2008: Corrosion-resistant (stainless) steel billets for cast dentures of orthopaedic dentistry. General specifications

GOST R 53456-2009: Whey protein concentrate powders. Specifications

GOST R 53456-2022: Whey protein concentrates dry. Technical specifications

GOST R 53492-2009: Canned milk. Whey powders. Specifications

GOST R 53494-2009: Premix vitamin and vitamin-mineral for wheat flour. Specifications

GOST R 54249-2010: Peat humate liquid fertilizers. Specifications

GOST R 54664-2011: Lactose. Specifications

GOST R 55732-2013: Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications

GOST R 55970-2014: Iodized food additives. General specifications

GOST R 55982-2014: Acid acetic for the food industry. Specifications

GOST R 56630-2015: Bakery products from rye bakery flour and rye bakery-and-wheat bakery flour. General specifications

GOST R 56631-2015: Products bakery from wheat bakery flour. General specifications

GOST R 56833-2015: Demineralized dairy whey. Specifications

GOST R 56968-2016: Table vinegar. Specifications

GOST R 57253-2016: Fodder yeast-Paprin. Specifications

GOST R 57598-2017: Microbiological products. Autolysate Microbial Protein Concentrate Feed 60 % (MPCF 60) Specifications

GOST R 57624-2017: Aromatized table vinegar. Specifications

GOST R 57683-2017: Microbiological products. Microbial Protein Concentrate Feed 60 %. Specifications

GOST R 57684-2017: Microbiological products. Bio stimulator crop growth. General requirements

GOST R 58161-2018: Bakery products for children supply. General specifications

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

ITS 32-2017: Production of polymers, including biodegradable

KMS 128:99: Scones. Technical conditions

KMS 952:2010: Acetic acid and vinegar for food purposes. Technical specifications

MU 4149-86: Methodological instructions for state sanitary supervision over production and application of polyolefin polymer materials intended for contact with food products

ONTP 2-87: All-Union standards for technological design of plastics processing facilities. II part

OST 24.023.29-84: Production planning system. Expanded plastic details produced by compression moulding and high-pressure die casting. Standard techniques and procedures.

OST 26-07-1374-76: Types and grades of plastics used in armature engineering.

OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.

OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions

R 475-82: Recommendations for the use of thermal insulation materials for the construction of oil and gas pipelines operating in special conditions

RD 107.460007.007-92: Plastic materials. Selection manual.

RD 153-39.1-561-08: Instructions for the construction, operation and repair of pipelines from metal-plastic pipes

RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.

RD 31.11.21.13-96: Packaged freight shipping safety rules.

RD 31.11.21.18-80: Technical conditions for the transportation, transshipment and storage of steel pipes of large diameter with factory external insulation

RD 31.11.21.30-85: Map of the technological regime for the transportation of soft containers

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 39-3-308-79: Methods of calculating consumption rates and analysis of polyethylene consumption

RD 52.04.878-2019: Sampling when observing the chemical composition of precipitation

RD 52.17.262-90: Guidelines. Methods of sampling, processing and concentration of samples of sea water, ice and snow cover during polar expeditions. Arctic and Antarctic Research Institute (AARI)

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 3-82-90: Shields and consoles of automation systems of technological processes. Features of application. Guide to OST 36.13-90

RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95

RM 4-6-92: Process automation systems. Design of electrical and pipe wiring. Part 3. Guidelines for the implementation of the documentation. Allowance for RTM 36.22.7-92

RST RSFSR 45-86: Sledge for children. Technical conditions

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 643-80: Black steel economic dishes . General specifications

RST RSFSR 655-81: Ice screws fishing. General technical conditions

RST RSFSR 92-83: Musical wind instruments. General technical conditions

RTM 25 390-80*: Devices for gas and oil production and processing plants containing hydrogen sulfide and carbon dioxide. Requirements for material performance and operating conditions

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SanPiN 2.4.7.007-93: Production and marketing of games and toys

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

ST RK GOST R 52579-2008: Consumers package from combined materials. General specification

ST TsKBA 056-2008: Pipe fittings. Types and brands of plastics used in the valve industry

STB 1517-2004: Plastic consumer packaging. General specifications

STB 1760-2007: Vinegars for food purposes. General specifications

STB 1858-2009: Dry milk. General specifications

STB 2219-2011: Milk whey powder. General specifications

STB 2219-2017: Dry whey. General technical conditions

STB 315-2017: Cottage cheese. General technical conditions

TR 162-04: Technical recommendations on the use of reinforced concrete pipes with an inner plastic sheath

TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating

TU 1390-004-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anticorrosive polyethylene coating for the construction of trunk pipelines

TU 14-3R-67-2003: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of trunk pipelines. Technical conditions

TU 2245-010-44271562-2004: Tape, heat-shrinkable polyethylene radiation-modified "Therma-L"

TU 2245-017-44271562-2005: Polymer tape "Terma-P". Technical conditions

TU 2246-004-56755147-2006: Rock sheet polymer to protect the insulated surface of pipelines. Technical conditions

TU 63.178-93-84: Recycled polyethylene sheets for shelter feed

TU 6-49-14-89: Connecting parts from high-pressure polyethylene for pressure pipes

VNTP 56-94: Standards for technological design of enterprises for the production of potato products

VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation

VSN 242-89: Guidelines for Technology for Sealing Joints of Exterior Wall Panels of Buildings for Utility, Amusement, Entertainment, and Recreation Purposes and Residential Buildings Using Products Manufactured by Mospromstroymaterialy PPO

VSN 35-95: Process Guidelines for the Use of Polymer Filter Membranes for the Protection of Below-Grade Portions of Buildings and Structures Against Groundwater

VSN 51-9-86: Design of offshore underwater oil and gas pipelines

VSN 8-94: Industry-Specific Building Code for Installation of Domestic Water Supply Systems Equipped with Water Meters, Backflow/Distribution Valves, and Flexible Connectors for Plumbing Fixtures

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!