GOST 12.4.183-91
ГОСТ 12.4.183-91
|
|
Materials for means of hand protection
Материалы для средств защиты рук
Status: Effective - Introduced for the first time
The standard applies to fabrics of different raw materials, artificial and natural leather, film polymeric materials, knitted and nonwoven canvas, and asbestos fabrics for the manufacture of hand protection at work, and establishes general technical requirements for them.
Стандарт распространяется на ткани различного сырьевого состава, искусственные и натуральные кожи, пленочные полимерные материалы, трикотажные и нетканые холстопрошивные полотна, асбестовые ткани, предназначенные для изготовления средств защиты рук на производстве, и устанавливает общие технические требования к ним.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
6/27/1991
SKU: RUSS19691
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.4 Legs, hands protection »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.40 Hand protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.40 Hand protection »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
PRODUCTS OF THE TEXTILE INDUSTRY - FINISHED FABRICS AND NON-WOVEN MATERIALS »
National Standards for OKSTU »
KNITTING INDUSTRY PRODUCTS »
Knitted fabrics »
National Standards for OKSTU »
PRODUCTS OF THE LEATHER INDUSTRY »
National Standards for OKSTU »
PRODUCTS OF THE INDUSTRY OF ARTIFICIAL LEATHER AND FILM MATERIALS, LEATHER PRODUCTS AND SHORNO-SADDLE OF ALL KINDS OF LEATHER »
The Document References:
GOST 10681-75: Textiles. Methods for determination atmospheric conditions for sample conditioning and testing
GOST 11209-85: Cotton and blended fabrics for protective clothing
GOST 12.4.049-78: System for safety standard's. Cotton and blended fabrics for industrial clothing. Method of determination wet treatment
GOST 12.4.118-82: Occupational labour safety standards. Polimerous film materials and synthetic leather as the means of protection arms. The method of determination of resistance to puncture
GOST 12.4.141-99: Occupational safety standards system. Hand protection means, industrial clothing and materials for their manufacture. Methods for determination of cut resistance
GOST 12.4.143-84: Occupational safety standards system. Film polymer materials for hand protection means. Methods for determination of permeability factor of organic solvents
GOST 12.4.184-97: Occupational safety standards system. Fabrics and materials for industrial clothing, hand protection means and upper for safety shoes. Methods for determination of burning-through resistance
GOST 12023-93: Textile. Cloth. Method of thickness determination
GOST 12088-77: Textiles and articles. Method for the determination of air permeability
GOST 12580-78: Latex films. Method of the determination of elastic and tensile stress-strain properties
GOST 12739-85: Knitted fabrics and garments. Method for the determination of abrasion resistance
GOST 15162-82: Artificial leather and synthetic and film materials. Methods for the determination of frost proof in static conditions
GOST 15530-93: Ducks and double-threads
GOST 15898-70: Linen and semi-linen fabrics. Method of determination of flame-proof properties
GOST 15902.2-79: Nonwoven fabrics. Methods determination of structural characteristics
GOST 15902.3-79: Nonwoven fabrics. Methods of strength determination
GOST 15967-70: Linen and semi-linen fabrics for overalls. Method for determination of surface abrasion resistance
GOST 17074-71: Artificial leather. Method for the determination of tear strength
GOST 17316-71: Artificial leather. Measuring method of tearing load and elongation of break
GOST 17317-88: Artificial leather. Method for determination of interlayer bonding strength
GOST 18273-89: Woollen sheet wadding stitched by canvas. General specifications
GOST 19008-93: Cotton stitched sheet wadding. General specifications
GOST 19196-93: Fabrics for shoes. General specifications
GOST 20566-75: Textile fabrics and piece-goods. Acceptance rules and sampling method
GOST 21353-75: Latex films. Method for determination of tear resistance
GOST 262-93: Rubber, vulcanized. Determination of tear strength (throuser, angle and crescent test pieces)
GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties
GOST 27542-87: Clothing all-wool and half-wool fabrics of departmental application. Specifications
GOST 27708-88: Decontaminable protective polymeric materials and coatings. Method for testing the ease of decontamination
GOST 28554-90: Cloth knitted
GOST 29298-92: Cotton and mixed fabrics for domestic use
GOST 3399-76: Medical rubber tubes
GOST 3811-72: Textile materials. Textile fabrics, nonwoven fabrics and piece-articles. Methods for determination of linear dimensions linear and surface density
GOST 3813-72: Textile materials. Textile fabrics and piece-articles. Methods for determination of brearing under tension
GOST 3816-81: Textile fabrics. Methods for determination of hygroscopic and water-repelent properties
GOST 6102-94: Asbestos fabric
GOST 7912-74: Rubber. The method for the determination of brittle temperature
GOST 8845-87: Knitted fabrics and garments. Methods for determination of moisture, mass and surface density
GOST 8846-87: Knitted fabrics and garments. Methods for determination of linear dimensions, distortion number of courses and wales and yarn length in the loop
GOST 8847-85: Knitted fabrics. Methods for determination of breaking characteristics and extensibility under loads less than breaking loads
GOST 8972-78: Artificial leather. Methods for determination of wetting and shrinking
GOST 8975-75: Artificial leather. Test methods for rubbing and adhesion strength of coating
GOST 8977-74: Artificial leather and films. Methods for determination of flexibility, hardness and elasticity
GOST 8978-75: Artificial leather and films. Methods of determination of stability of repeated flexing
GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
GOST 938.0-75: Leather. Rules of acceptance. Methods of sampling
GOST 938.13-70: Leather. Method of measuring of weight and linear sizes of samples
GOST 938.14-70: Leather. Method of conditioning
RST RSFSR 588-84: Cotton fabric and mixed. Two-thread Technical conditions
The Document is Referenced By:
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
GOST 12.4.002-97: Vibration protection means for hands
GOST 12.4.217-2001: Occupational safety standards system. Personal protection equipment against radioactive substances and ionizing radiation. Requirements and test methods
GOST 12.4.252-2013: Occupational safety standards system. Personal protective means of hands. Gloves. General technical requirements. Test methods
GOST 12.4.271-2014: Occupational safety standards system. Protective equipment for hands. General technical requirements and test methods
GOST 12.4.274-2014: Occupational safety standards system. Protective means of hands from the contact with cooled objects. General technical requirements
GOST 15530-93: Ducks and double-threads
GOST 2184-2013: Sulphuric acid for industrial use. Specifications
GOST 33877-2016: Gas supply system. Trunk pipeline transportation of gas. Conditions of stay and use of buildings and structures safe for human health. Protection from vibration in the workplace. Technical requirements
GOST R 12.4.246-2008: Occupational safety standards system. Personal protective means of hands. Gloves. General technical requirements. Test methods
GOST R 54848-2011: See attached file. General specifications. Тest methods
GOST R 70200-2022: Forest protection. Special equipment for extinguishing forest and other landscape (natural) fires. General technical requirements. Control methods
GOST R 70366-2022: Protective earthing when working on overhead power lines of high voltage. Technical requirements
MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization
Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
