imgalt

GOST 12586.0-83

ГОСТ 12586.0-83

Reinforced-concrete vibrohydropressed pressure pipes

Трубы железобетонные напорные виброгидропрессованные. Технические условия

Status: Effective - Supersedes. IUS 2-1984

The standard applies to reinforced concrete pre-stressed pressure sockets made of heavy concrete by the method of vibro-pressing and intended for laying pressure pipelines that transport liquids with a temperature not exceeding 40 ° C and a non-aggressive impact on the reinforced concrete structures and sealing rubber rings of butt joints. If the transported fluid or soils are aggressive towards pipes or sealing rubber rings, then they should be protected from corrosion.

Стандарт распространяется на железобетонные предварительно напряженные напорные раструбные трубы, изготовляемые из тяжелого бетона методом виброгидропрессования и предназначенные для прокладки напорных трубопроводов, по которым транспортируют жидкости с температурой не выше 40 °С и неагрессивной степенью воздействия на железобетонные конструкции и уплотняющие резиновые кольца стыковых соединений. Если транспортируемая жидкость или грунты являются агрессивными по отношению к трубам или уплотняющим резиновым кольцам, то следует предусматривать их защиту от коррозии.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Council of Ministers of the USSR for Construction, 10/31/1983

SKU: RUSS19692

Price: $316.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.50 Pipes and fittings of other materials »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.50 Pipes and fittings of other materials »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh33 Stone, brick, concrete and reinforced concrete structures and parts »

National Standards for OKSTU » REINFORCED CONCRETE STRUCTURES AND PARTS (INCLUDING REINFORCED CONCRETE CONCRETE PRODUCTS) » Pressure pipes »


As a Replacement Of:

GOST 12586-74: Pipes of reinforced concrete vibro-hydraulic pressed

The Document References:

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-78: Concrete. Methods for determining the compressive strength and tensile strength

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10260-82: Crushed stone gravel for construction works. Specification

GOST 10268-80: Heavy concrete. Technical requirements for fillers

GOST 12586.1-83: Reinforced-concrete hydraulically forged pressure culverts. Design.

GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements

GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance

GOST 13015.2-81: Prefabricated concrete and reinforced concrete constructions and products. Marking

GOST 13015.3-81: Prefabricated concrete and reinforced concrete constructions and products. Quality certificate

GOST 17022-81: Graphite. Types, marks and general technical requirements

GOST 18105.0-80: Concrete. Strength control rules. General principles

GOST 18105-86: Concretes. Rules for the strength control

GOST 19113-84: Pine common rosin

GOST 22000-86: Concrete and reinforced concrete pipes. Types and basic parameters

GOST 22904-78: Reinforced concrete structures. Magnetic method for the determination of the thickness of concrete protection layer and the location of the reinforcement

GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement

GOST 23009-78: Prefabricated concrete and reinforced concrete constructions and products. Symbols (marks)

GOST 23723-79: Ionization gas and pulse neutron chambers. Method for measuring the slope of the current-voltage characteristic

GOST 24983-81: Reinforced-concrete pressure pipes

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26633-85: Heavy-weight and sand concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 26995-86: Ionization gas-discharge detectors. Specifications

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications

GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications

GOST 8267-82: Crushed stone made from natural stone for construction works. Specification

GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications

GOST 8736-85: Sand for construction work. Technical requirements

GOST 8736-93: Sand for construction works. Specifications

The Document is Referenced By:

GOST 12586.1-83: Reinforced-concrete hydraulically forged pressure culverts. Design.

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters

GOST 24983-81: Reinforced-concrete pressure pipes

GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications

Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures

Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures

Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 3.05.04-85: Allowance for laying and installation of cast-iron, reinforced concrete and asbestos-cement water supply and sewage pipelines

SN 412-70: Consumption rates of materials, pipes, sanitary ware and heating devices per 1 million rubles. estimated cost of construction and installation works. Light industry. Food industry. Meat and dairy industry. Fish industry

SN 416-70: Consumption rates of materials, pipes, sanitary wares and heating devices for 1 million rubles. estimated cost of construction and installation works. Oil industry. Oil refining industry. Chemical (petrochemical) industry. Gas industry. Transportation of

SN 421-71: Consumption rates of materials, pipes, sanitary ware and heating devices for 1 million rubles. estimated cost of construction and installation works. Non-ferrous metallurgy

SN 425-71: Consumption rates of materials, pipes, sanitary wares and heating devices per 1 million rubles. estimated cost of construction and installation works. Ferrous metallurgy

SN 425-78: Consumption rates of materials and products for 1 million rubles. estimated cost of construction and installation works

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English
Price: $98.48
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!