GOST 5949-75

ГОСТ 5949-75

Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

Сталь сортовая и калиброванная коррозионностойкая, жаростойкая и жаропрочная

Status: Not effective - Superseded. Information about the registration of 624-st from 09/20/2018 (the official website of Rosstandart); IUS 12-2018

The standard applies to hot-rolled and forged steel with a diameter, side of a square or up to 200 mm thick, calibrated steel with a diameter or side of a square up to 70 mm, with special surface finish, corrosion-resistant, heat-resistant and heat-resistant.

Стандарт распространяется на горячекатаную и кованную сталь диаметром, стороной квадрата или толщиной до 200 мм, калиброванную сталь диаметром или стороной квадрата до 70 мм, со специальной отделкой поверхности, коррозионностойкую, жаростойкую и жаропрочную.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 9/16/1975

SKU: RUSS19708

Price: $175.00

English keywords: high grade steel;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »


The Document is Replaced With:

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

As a Replacement Of:

GOST 10500-63: Rods and strips of heat-resistant steels

GOST 5949-61: High-quality stainless steel and heat-proof steel. Technical requirements

The Document References:

GOST 10145-81: Metals. Stress-rupture test method

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 103-76: Hot-rolled steel strip. Dimensions

GOST 1051-73: Calibrated quality steel

GOST 11098-75: Gauge callipers with reading arrangement. Specifications

GOST 1133-71: Forged round and square steel. Dimensions

GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 14955-77: Quality round steel with a special surface finish

GOST 1497-84: Metals. Methods of tension test

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 15846-79: Products for transportation to the areas of the far north and remote regions

GOST 166-89: Vernier callipers. Specifications

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 2216-84: Adjustable smooth snap gauges

GOST 2246-70: Welding steel wire. Specifications

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 2590-88: Round steel bars. Dimensions

GOST 2591-88: Square Hot-rolled Steel Bars Dimensions

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6507-90: Micrometers. Specifications

GOST 7417-75: Calibrated round steel

GOST 7502-89: Measuring metal tapes. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-81: Rolled stock and products for further treatment

GOST 7566-94: Metal products

GOST 8559-75: Square bar steel. Products sizes

GOST 8560-78: Calibrated hexahedral rolled stock

GOST 8817-82: Metals. Upsetting test method

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

The Document is Referenced By:

ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions

GN 2.3.3.972-00: Nutrition hygiene. Package, crockery, equipment and other types of productions, contacting with food. Maximum admissible amounts (MAA) of chemical substances, emitting from materials contacting with food

GOST 10160-75: Magnetically soft precision alloys

GOST 10304-80: Rivets

GOST 1051-73: Calibrated quality steel

GOST 13196-93: Means of level measuring and sampling of oil and oil products

GOST 13663-68: Shaped steel pipes technical requirements

GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications

GOST 14225-83: Wooden cases

GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation

GOST 14803-85: Rivets (high precision). General specifications

GOST 14864-78: Pneumatic plug gauges from 3 to 160 mm. Specifications

GOST 14955-77: Quality round steel with a special surface finish

GOST 16078-70: Tube connections on internal cone. Technical requirements

GOST 16463-80: Solid carbide keyway cutters

GOST 17535-77: Metal high precision parts of devices. Dimension stabilisation by heat treatment. Typical technological processes

GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel

GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades

GOST 1908-82: Condenser paper. General specifications

GOST 1908-88: Capacitor paper

GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel

GOST 19532-74: Sealing devices of screw joints with round cross-section rubber rings. Nuts. Construction and dimensions

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 21963-82: Cutoff wheels

GOST 23.211-80: Products wear resistance assuring. Testing of materials for wear under fretting and fretting-corrosion conditions

GOST 23.219-84: Products wear resistance assurance. Test method for wear resistance of materials and details with hydro erosion wearing by dispersed particles

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 23988-80: Fittings for pressure gauges for connection to pipelines with lens seal. Design and dimensions

GOST 23992-80: Fittings under pressure gauges for connection to pipelines along the outer cone 74 °. Design and dimensions

GOST 23994-80: Fittings under pressure gauges for connection to pipe-end pipelines. Design and dimensions

GOST 23995-80: Fittings for pressure gauges for connection to pipelines with an engaging ring and a ball nipple. Design and dimensions

GOST 23997-80: Nozzles for pressure gauges. Technical requirements

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 26526-85: Vacuum equipment. Flanger joint for high vacuum system. Design, dimensions and technical requirements

GOST 27702-88: Steel and alloys. Unified grades

GOST 28759.8-90: Metal gaskets of octagonal cross-section

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30777-2001: Turned, reclined and turned-reclined devices for windows and balcony doors. Specifications

GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33683-2015: Polymer composite constructions of covered hopper wagons of 1520 mm gauge for bulk materials. Specifications

GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34518-2019: Industrial furnaces and thermal units. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 6927-2018: Сoncrete slabs for wall facing. Technical requirements

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 9.085-78: Single corrosion and ageing protection system. Cooling lubricant. Bioresistance test methods

GOST 9074-85: Joined by pins slot cloths

GOST R 50194-92: Devices for automation of tank farms. Means for level measurement and sampling of oil products. General technical requirements and test methods

GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52857.1-2007: Vessels and apparatus. Norms and methods of strength calculation. General requirements

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54908-2012: Heat-resistant steel metal products. Specifications

GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 56177-2014: Controlled door closing devices (door closers). Specifications

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Manual for SNiP 2.03.04-84: A guide for the design of concrete and reinforced concrete structures designed to work in conditions of exposure to elevated and high temperatures

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges

OST 108.410.02-82: Tip. Design and dimensions.

OST 108.724.02-82: Control thimble. Design and dimensions.

OST 24.125.08-89: Point joints for NTPP pipe lines. Design and dimensions.

OST 24.125.11-89: Adapters Dу less than 50 mm for CHP plant pipelines. Design and dimensions.

OST 24.125.12-89: Adapters for nuclear thermal power plant pipelines. Design and dimensions.

OST 24.125.20-89: Units with diaphragms for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.21-89: Bedplates for APP pipelines. Construction and dimensions.

OST 24.125.22-89: Lobes for pipelines of nuclear thermal power plant. Design and dimensions.

OST 24.125.23-89: Plugs for nuclear thermal power plant pipelines. Design and dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions

OST 26-02-535-78: Piston oil pumps with electric drive and regulated supply

OST 26-02-757-79: Ladders. Design, dimensions and specifications.

OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.

OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 34-10-425-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges. Construction and dimensions.

OST 34-10-426-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges to webbings. Construction and dimensions.

OST 34-10-428-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flanged plugs with a joggle. Construction and dimensions.

OST 34-10-433-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Transitional tees with a reinforced fitting. Construction and dimensions.

OST 34-42-505-80: Details and components of APP pipelines, P≤4 MPa (40 kg/cm2). Welded connections for orifice plates, Dy from 50 to 125 mm. Construction and dimensions.

OST 34-42-506-80: Details and components of APP pipelines, P≤4 MPa (40 kg/cm2). Welded connections for orifice plates, Dy from 150 to 1200 mm. Construction and dimensions.

OST 34-42-507-80: Details and components of APP pipelines, P≤4 MPa (40 kg/cm2). Technical requirements.

OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection

PNST 218-2017: Aviation equipment. Hydraulic systems. Branch pipes, tips with outer cone, for internal expansion

PNST 228-2017: Aviation equipment. Hydraulic systems. Straight, cross, triple, transitional and transitional connectors, under axial pressing for a pressure of 35 MPa. Specifications

PNST 231-2017: Aviation equipment. Hydraulic systems. Pass-through and transitional connectors, under axial pressure fitting for pressure 35 MPa. Angle connector, coupling-nipple with nut

PNST 232-2017: Aviation equipment. Hydraulic systems. Pass-through and transitional connectors, under axial press-fit for pressure 35 MPa. Cross connector, coupling-coupling

PNST 236-2017: Aviation equipment. Hydraulic systems. Connectors pass-through and transitional, under axial pressure fitting for pressure 35 MPa. Angle connector, coupling-nipple

PNST 240-2017: Aviation equipment. Hydraulic system. Pass-through and transitional connectors, under axial pressure fitting for pressure 35 MPa. Connector straight, coupling-nipple with inner cone

PNST 241-2017: Aviation equipment. Hydraulic systems. Pass-through and transitional connectors, under axial pressing on pressure 35 MPa. Connector straight, coupling-nipple with nut

RB-090-14: Safety guide on nuclear energy use

RD 13-06-2006: Guidelines for the procedure for capillary control of technical devices and structures used and operated at hazardous production facilities

RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.

RD 153-34.1-24.505-98: Recommended Practice for Selection of Injectors for Supplying Water Spray in Fuel Pulverizing Systems in Order to Quickly Reduce the Temperature of the Dust-Gas-Air Mixture in Emergencies

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

RD ROSEK-004-97: Hoisting machines. Capillary control. Key Points

RD RTM 26-366-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Spectral methods of steel analysis

Resolution: Rules for the design and safe operation of steam and hot water boilers

RM 2970: Device for damping the speed of the fall of waste in the garbage disposal of multifunctional high-rise buildings. Stage I

RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions

RTM 108.711.02-79: Power valves. Methods for determining the capacity of regulatory bodies and the choice of optimal flow characteristics

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

SNiP 2.03.04-84: Concrete and reinforced concrete structures designed to operate under elevated and high temperatures

SO 34.26.731: Recommendations for improving the reliability of operation of boiler control valves and reducing power consumption for driving electric feed pumps at cross-link thermal power plants

SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures

SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures

SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions

TU 108.11.853-87: Procurement of parts from purchased long products

TU 14-131-621-85: Bars made of steel grade 10X18H11S5M2TYU (EP987). Pilot Industrial Party

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00
Water quality. Sewage water
Language: English
Price: $120.30
Passenger cars. Windscreen defrosting and demisting systems. Technical requirements and test methods
Language: English
Price: $97.00
Passenger cars. Windscreen wiper and washer systems. Technical requirements and test methods
Language: English
Price: $171.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!