imgalt

SNiP 3.02.01-87

СНиП 3.02.01-87

Earthen structures, foundation and basis

Земляные сооружения, основания и фундаменты

Status: The document is not updated

The rules and regulations apply to the production and acceptance of earthworks, construction of foundations and foundations for the construction of new, reconstruction and expansion of existing enterprises, buildings and structures. The rules should be observed in the design of earthworks, foundations and foundations, drawing up projects for the production of works and the organization of construction, as well as during their construction

Нормы и правила распространяются на производство и приемку земляных работ, устройство оснований и фундаментов при строительстве новых, реконструкции и расширении действующих предприятий, зданий и сооружений. Правила следует соблюдать при проектировании земляных сооружений, оснований и фундаментов, составлении проектов производства работ и организации строительства, а также при их возведении

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 12/4/1987

SKU: RUSS19710

Price: $1,278.00

imgalt

The Product is Contained in the Following Classifiers:

Highways (Max) » Design, construction, repair and maintenance of artificial structures on roads » 20. Occupational safety and safety in construction of artificial structures. »

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.50 Foundations and foundations of buildings and structures »

Technical Supervision » Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact » IV. Regulatory legal acts and regulations » 4. Security of capital construction objects » 4.1. Federal State Construction Supervision »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.020 Earthworks. Excavation. Foundation construction. Underground work » 93.020.30 Earthworks. Blasting work »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.020 Earthworks. Excavation. Foundation construction. Underground work » 93.020.45 Foundations »


As a Replacement Of:

SN 536-81: Instructions for backfilling in cramped areas

SNiP 3.02.01-83: Manual on injection chemical grouting in industrial and civil construction

SNiP III-8-76: Earthworks. Rules of production and acceptance of work

The Document References:

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 17.4.3.02-85: Nature protection. Soils. Requirement for fertile layer conservation in performing earth-moving

GOST 17.5.3.04-83: Nature protection. Lands. Reclamation general requirements

GOST 17.5.3.06-85: Nature protection. Lands. Requirements for determination of the fertile soil layer standard disposal while performing earth-moving

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 19912-81: Soils. Field test method by dynamic sounding

GOST 20069-81: Soils. Field test method by static sounding

GOST 22733-77: Soils. A laboratory method for determining maximum density

GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity

GOST 25100-82: Soils. Classifications

GOST 5180-84: Soils. Laboratory methods for determination

GOST 5686-78: Piles. Field test methods

GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements

RD 39-0147103-358-89: Instruction on the process of overhaul of underwater oil pipelines by the method of grafting on category I-III soils using existing technical means

Resolution 280: On approval of SNiP 3.02.01-87 "Earth constructions, bases and foundations", SNiP 3.03.01-87 "Bearing and enclosing structures", SNiP 3.04.01-87 "Insulating and finishing coatings".

SN 449-72: Design Guidelines for Roadbeds for Roads and Railroads

SN 536-81: Instructions for backfilling in cramped areas

SNiP 1.02.01-85: Instructions on the composition, procedure for the development, coordination and approval of design estimates for the construction of enterprises, buildings and structures

SNiP 1.02.07-87: Engineering Research for Construction

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP 3.04.01-87: Insulation and finishing coatings

SNiP 3.05.05-84: Processing equipment and process pipelines

SNiP 3.07.02-87: Hydraulic engineering marine and river transport facilities

SNiP III-8-76: Earthworks. Rules of production and acceptance of work

SNiP IV-2-82: Price lists for the construction of buildings and structures for intersectoral purposes

SNiP IV-5-82: Collections of single prices for building structures and works for the base points of the regions of the Far North and certain areas equated to them

VSN 43-71: Instructions for quality control of the construction of alluvial earthworks

The Document is Referenced By:

GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition

GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading

GOST 34826-2022: Trunk pipeline transport of oil and petroleum products. Linear part. Organization and production of construction and installation works

GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements

GOST R 52059-2003: Services. Services on the repairing and construction of the habitation and other buildings. General specifications

GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements

GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition

GOST R 70308-2022: Injection mortars for the consolidation of soils based on fine binders. Technical specifications

GOST R 70311-2022: Public roads. Bridge structures. Rules for construction and strengthening of approach embankment cones

GOST R 70312-2022: Public roads. Bridge structures. Rules for design of interfaces with approach embankments

GOST R 70406-2022: Outdoor engineering networks. Installation and testing of external hot pipelines made of flexible nonmetallic pipes. Rules and control of work performance

GOST R 70519-2022: Tailings ponds of hydrometallurgical plants of uranium mining enterprises. Design standards

GOST R 70696-2023: Injection mortars for cement-based soil consolidation. Test methods

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines

Instruction 23-02: Instruction on transportation and pouring of concrete in monolithic constructions by means of transit concrete mixers and concrete pumpers

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for MGSN 2.07-01: Inspection and monitoring during the construction and reconstruction of buildings and underground structures

Manual for SNiP 2.01.28-85: Manual for the design of landfills for the disposal and disposal of toxic industrial waste

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")

Manual for SNiP 3.05.02-88: Manual on technology and organization of the construction of pipelines for gas supply systems in rural areas of the Non-chernozem zone of the RSFSR

Manual for SNiP 3.05.04-85: Allowance for laying and installation of cast-iron, reinforced concrete and asbestos-cement water supply and sewage pipelines

Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities

MDK 2-04.2004: Methodological manual for the maintenance and repair of housing

MDS 11-3.99: Recommended Practice for Conformity Assessment of Feasibility Studies (Projects) for Construction of Nonindustrial Facilities

MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures

MDS 11-5.99: Procedure Guidelines On The Expert Appraisal of Engineering Survey for the Feasibility Study (Projects, Draft Projects) of the Construction Units

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 12-34.2007: Waterproofing works

MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work

MDS 12-52.2009: In situ pile construction

MDS 12-7.2000: Guidelines On Procedure for State Supervision for Compliance with Construction Standards and Codes during Construction and Installation Activities at Industrial Facilities

MDS 31-11.2007: Floor construction

MDS 31-12.2007: The floors of residential, public and industrial buildings using materials from the company "Henkel Bautechnik." Materials for design and working drawings of nodes

MDS 50-1.2007: Design and construction of foundations, foundations and underground parts of multifunctional high-rise buildings and building complexes

ODM 218.2.016-2011: Guidelines for the design and installation of bored piles with increased bearing capacity along the ground

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures

OSN-APK 2.10.01.001-04: Design of shallow-depth foundations of low-rise rural buildings on heaving soils

OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia

OST 153-39.4-027-2002: The technology of dismantling of the linear part of main oil pipelines

PB 06-123-96: Safety Requirements for Operation of Tailings, Slag, and Hydraulic-Mine Dump Facilities

PB 12-245-98: Safety Requirements for Gas Supply Facilities

PB 12-368-00: Gas industry safety rules

PNAE G-05-035-94: Considerations external actions of natural and anthropogenic nature on nuclear and radiation hazardous objects

PNST 804-2022: Piles. Seismoacoustic method of length and continuity control

POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry

POT R O-45-005-95: Occupational Safety and Health Requirements for Work on Cable Communications Lines and Closed-Circuit Radio Broadcasting (Installation of Closed-Circuit Radio Networks)

R Gazprom: Temporary technical requirements for equipment for opening pipelines

RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities

RD 03-33-95: Guidelines for Supervision of Construction and Installation Practices at Nuclear and Radiation Hazardous Facilities

RD 11-06-2007: Guidelines on development procedure for work execution program and schedule for hoisting machines and loading-unloading operations process chart.

RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities

RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities

RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.

RD 153-39.4-044-99: Rules of total overhaul of main oil product pipelines laid in the cities, settlements and entering the territory of tank farms and pumping stations

RD 153-39.4-056-00: Main crude pipeline. Operations rules.

RD 153-39.4-074-01: Instruction on emergency and damage response at submerged crossings of main oil-products pipelines.

RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 31.31.38-86: Instructions for strengthening and reconstruction of mooring facilities.

RD 31.31.50-88: Recommendations for the design and construction of coastal sailings and the formation of artificial territories by sea dredging. Minmorflot, Soyuzmorniiproekt, 1988

RD 31.31.52-89: Recommendations for the design, construction and operation of ice berthing facilities

RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990

RD 34 15.073-91: Guidance on geotechnical control over preparation of grounds and erection of soil structures in power engineering

RD 34.21.408-95: Guidelines for Acceptance of Smokestacks Under Construction

RD 39-00147105-015-98: Rules of total overhaul of main oil pipelines

RD 39-0147103-358-89: Instruction on the process of overhaul of underwater oil pipelines by the method of grafting on category I-III soils using existing technical means

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (

RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS

RD 51-2-95: Regulations of compliance with environmental requirements for the location, design, construction and operation of underwater crossings of trunk pipelines of RAO "Gazprom", 1995

RD 51-3-96: Regulations for the maintenance of underwater crossings of main gas pipelines through water barriers

RD 5-VEP: Guidance document on the use of axial bellows expansion joints of OJSC Metalomp in the design, construction and operation of heating networks according to technical specifications TU 5-99 NFCP.302667.310 TU (SK-160.000.00.TU) "Compensators bellows" SK-MK

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Recommendations 102-04: Recommendations on concreting of the structures by means of concrete pump when transportation of concrete mixture by concrete mixer trucks

Resolution 207: Rules for the organization of preparation and production of excavation and construction work in Moscow.

Resolution 280: On approval of SNiP 3.02.01-87 "Earth constructions, bases and foundations", SNiP 3.03.01-87 "Bearing and enclosing structures", SNiP 3.04.01-87 "Insulating and finishing coatings".

R-SSK 01-2016: Recommendations on the procedure for keeping a general log of work performance during construction, reconstruction, and capital repair of capital construction facilities

RTM 1652-9-89: Guide to engineering survey, assessment of the quality and reliability of building structures of buildings and structures

RTM 36.44.12.2-90: Design and Installation of Foundations Using Pile Driven by Pushing

Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities

SNiP 3.04.01-87: Insulation and finishing coatings

SNiP 3.05.03-85: Heat networks

SNiP 3.06.04-91: Bridges and pipes

SNiP 3.07.01-85: Hydraulic engineering river constructions

SNiP 3.07.02-87: Hydraulic engineering marine and river transport facilities

SNiP 32-04-97: Railway and highway tunnels

SNiP 34-02-99: Underground Storage Facilities for Gas, Petroleum, and Their Products

SP 104-34-96: SPSMG. A set of rules on the construction of the linear part of the pipeline. Performing excavation. RAO "Gazprom", 01/10/96

SP 108-34-97: SPSMG. The construction of underwater passages. RAO "Gazprom", 01/08/98

SP 109-34-97: SPSMG. The construction of crossings under roads and railways

SP 11-105-97: Engineering and geological survey for construction

SP 11-109-98: Prospecting for soil building materials

SP 120.13330.2012: Subway systems

SP 12-103-2002: Tracks for ground rail cranes. Design, installation and operation

SP 122.13330.2011: Railways and highway tunnels

SP 123.13330.2011: Underground storages of natural gas, oil and processing products

SP 151.13330.2012: Engineering site investigations for nuclear power plants construction

SP 22.13330.2011: Buildings and structures foundations

SP 29.13330.2011: Floors

SP 32-101-95: Design and installation of the foundations of bridges in areas with permafrost

SP 32-105-2004: Subways

SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85

SP 34-112-97: Construction of Trunk Pipelines and Flowlines. Integrated Technology and Organization

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 40-104-2001: Design and installation of underground pipelines of water supply with fibreglass pipes. Amendments, published in the BST 2002, №1 № 4, № 5, 2005.

SP 40-105-2001: Design and installation of underground sewage pipelines made of fibreglass pipes

SP 40-106-2002: Design and installation of underground water supply pipelines using pipes of ductile cast iron with nodular graphite

SP 41-105-2002: Design and construction of underground thermal networks made of steel pipes with industrial thermal insulation made of polyurethane foam in polyethylene sheath

SP 41-106-2004: Design and erection of underground hot water supply and heat supply pipelines made of asbestos cement pipes

SP 41-106-2006: Design and installation of underground pipeline systems for hot water supply and heating made of pressurized of asbestos-cement pipes and couplings. To replace SP 41-106-2004

SP 41-107-2004: Design and installation of underground hot water networks made of pipes PE-C (XLPE) with thermal insulation made of polyurethane foam in polyethylene sheath

SP 45.13330.2012: Earth structures, bases and foundations

SP 471.1325800.2019: Building Information Modeling. Quality control of construction works

SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures

SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures

SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite

ST RK 1399-2005: Motor roads. Engineering surveys for construction, reconstruction, and capital repairs. Requirements for scope of work

TMD Sankt-Peterburg 50-601-2004: Method for assessing the characteristics of frost-hazardous properties of soils in the construction of St. Petersburg

TR 100-99: Recommended Practice for Construction of Auger Pile Foundations within the Area of Existing Development

TR 101-07: Technical recommendations for the design and construction of non-pressure underground pipelines for domestic and rainwater sewage from polyethylene pipes with a two-layer profiled wall "Korsis"

TR 102-08: Technical recommendations for the design and construction of underground pipeline systems for non-pressure utility sewage and rainwater drains using polyethylene wells

TR 108-00: Recommended Practice for Field Tests of Soils Using Reinforced Concrete Piles Under Construction Conditions

TR 129-02: Technical recommendations for the construction of heat and water supply networks of steel pipes with polyurethane foam insulation in underground channel and ground gaskets

TR 130-02: Technical recommendations on the design and ductless laying of hot water pipelines from PE-X pipes insulated with polyurethane foam in Proflex corrugated polyethylene sheath

TR 132-03: Technical recommendations for the installation of foundations by the method of static pressing in piles for residential and public buildings

TR 145-03: Technical recommendations for the production of earthworks in road construction, with the device of underground engineering networks, with backfilling of pits, trenches, sinuses

TR 159-04: Technical recommendations on the technology of construction of urban roads in the winter

TR 160-04: Technical Recommendations for the design and channelless installation of intra-block pipelines for hot water supply and heat supply from glass-basalt-plastic pipes and products

TR 170-05: Technical recommendations for the design and construction of underground drainage networks of non-pressure polyethylene pipes with a double-layer wall

TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TR 73-98: Guide to Good Practice for Compacting Soil When Backfilling Ditches, Trenches, and Voids

TR 94.01-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 01: Earthwork

TR 94.02-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 02: Construction of Foundation Beds and Foundations

TR 94.12-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 12: Site Improvements and Amenities for Buildings and Structures Under Construction

TR 94.13-01: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 13: Installation Quality Control of Building Services Systems

TR 95.03-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 03: Construction of Pile Foundations

TR 95.04-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 04: Construction of Drainage Systems

TR 95.14-01: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 14: Standard Procedure for Foundation Construction

TSN 12-303-98: Requirements for the Organization of Construction and Execution of Earthwork in the Moscow Region

TSN 12-310-97 SO: Underground facilities

TSN 30-307-2002: Design Standards for Integrated Site Improvements and Amenities in the City of Moscow

TSN 30-308-2002: Design, construction and reclamation of solid waste landfills in the Moscow region

TSN 41-307-2003: Design and Construction of Piped Heat Distribution Networks with Individual Foam Polyurethane Thermal Insulation. City of Moscow

TSN 50-302-96: Construction of Foundations for Civil Buildings and Structures Located in the Metropolitan Area Administered by the City of St. Petersburg

TSN 50-303-96 NN: Foundations and foundations of buildings and structures in the alluvial territories of the Nizhny Novgorod region

TSN 50-303-99: Design and Installation of Shallow Foundations for Low-Rise Dwellings in the Moscow Region

TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures

TSN 50-304-2001: Basements, foundations, and underground constructions

TSN 50-306-2005: Foundations and foundations of increased bearing capacity. Rostov region

VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)

VSN 003-88: Design and Installation Guidelines to Plastic Piping

VSN 005-88: Construction of field steel pipelines Technology and arrangement

VSN 010-88: Construction of main pipelines. Underwater transitions

VSN 012-88: Main pipeline and flowline construction. Quality control and commissioning of works

VSN 127-91: Dewatering Planning and Execution Guidelines for Subsurface Water Removal to Permit Tunnel and Subway Construction

VSN 178-91: Standards for Planning and Executing Drilling and Blasting Operations in Roadbed Construction

VSN 19-89: Work acceptance rules for highway construction and repair

VSN 210-91: Design, construction and operation of anti-landing structures and devices

VSN 214-93: Standards for design and production of hydraulic works in transport construction

VSN 238-88: Guidelines to the Design and Installation of Communications Raceways Made of Corrugated Plastic Pipes

VSN 239-88: Process Guidelines for the Use of Woven and Non-Woven Polymer Filter Membranes for Protection of Below-Grade Portions of Buildings and Structures Against Underflooding by Groundwater

VSN 240-88: Process Guidelines for Waterproofing Type A Cast-In-Place Underground Structures Using Polyethylene Sheets

VSN 29-95: City of Moscow Industry-Specific Building Code for the Design and Trenchless Installation of Return-Pipe Heat Distribution Systems Made of Polyethylene-Jacket Pipes with Industrial-Grade Polyurethane Foam Insulation

VSN 32-95: Guidelines for Design of Pile Foundations for High-Rise Residential Occupancies

VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III

VSN 35-95: Process Guidelines for the Use of Polymer Filter Membranes for the Protection of Below-Grade Portions of Buildings and Structures Against Groundwater

VSN 385-88: Use of Hydromechanical Methods to Prepare Foundation Beds for Civil and Industrial Construction Projects

VSN 38-96: Guidelines for Earthwork in Nonindustrial Construction Performed by Organizations Administered by Glavmosstroy

VSN 39-1.10-002-2000: Repair of Gas Pipelines Using Hydraulic Excavation Methods

VSN 3-94: Industry-Specific Building Code for the Installation of Underground Cold Water Supply Pipelines Made of Steel Pipe 300-600 mm in Diameter with Internal Cement-Sand Insulation

VSN 51-1-97: Work Execution Requirements for Overhaul of Trunk Pipelines

VSN 517-89: Installation of Process Equipment and Metal Structures for Coke-Oven Batteries

VSN 61-89: Exploration, design and construction of the railways in regions of the permafrost

VSN 9-94: Flooring Guidelines for Residential and Public Buildings

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!