GOST 12801-98

ГОСТ 12801-98

Materials on the basis of organic binders for road and airfield construction. Test methods

Материалы на основе органических вяжущих для дорожного и аэродромного строительства Методы испытаний

Status: Effective - Supersedes. IUS 5-1999

This standard applies to a mixture of asphalt, organic-mineral, soil, reinforced with organic binders, and asphalt, used for the installation of coatings and foundations of roads, airfields, city streets and squares, roads of industrial enterprises, and establishes methods for their testing.

Настоящий стандарт распространяется на смеси асфальтобетонные, органоминеральные, грунты, укрепленные органическими вяжущими, и асфальтобетон, применяемые для устройства покрытий и оснований автомобильных дорог, аэродромов, городских улиц и площадей, дорог промышленных предприятий, и устанавливает методы их испытаний

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 63

Approved: Gosstroy of Russia, 11/24/1998

SKU: RUSS19712

Price: $278.19




The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.68 Road materials »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 014/2011 TR CU. Road safety » Regulations and standards (to TR TS 014/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.3 Testing of products in construction »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.20 Road construction materials »

National standards » 93 CIVIL CONSTRUCTION » 93.080 Road construction » 93.080.20 Road construction materials »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh19 Test methods. Packaging. Marking »


As a Replacement Of:

GOST 12801-84: Asphaltic concrete mixtures for roads and airdromes, tar concrete mixtures for roads, asphaltic concrete and tar concrete. Methods of testing

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12801-84: Asphaltic concrete mixtures for roads and airdromes, tar concrete mixtures for roads, asphaltic concrete and tar concrete. Methods of testing

GOST 166-89: Vernier callipers. Specifications

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24104-88: General purpose and reference laboratory balances

GOST 2874-82: Drinking water. Hygienic requirements and quality control

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 6613-86: Square meshed woven wire gauzes

The Document is Referenced By:

DND MO-004/2004: Recommendations for the selection of asphalt concretes on bituminous rubber composite binder for the upper layers of coatings and wear layers

GOST 27816-2017: Asphalt pavers. Test methods

GOST 27816-88: Asphalt paver. Test methods

GOST 30491-2012: Organomineral mixtures and soils stabilized by organic binders for road and airfield construction. Specifications

GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications

GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications

GOST 32707-2014: Automobile roads of general use. Mineral powder. Method for determination of swelling samples from a mixture of powder with bitumen

GOST 32765-2014: Automobile roads of general use. Mineral powder. Method for determination of the water resistance of asphalt binder (a mixture of the mineral powder with bitumen)

GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing

GOST 32870-2014: Automobile roads of general use. Bituminous mastics. Technical requirements

GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications

GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications

GOST R 52576-2006: General use highways. Road marking materials. Test methods

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 53627-2009: Fine-layered polymer coating for roadway of bridges. Specifications

GOST R 54400-2011: Automobile roads of general use. Hot road mastic asphalt. Test methods

GOST R 55052-2012: Reclaimed asphalt. Specifications

GOST R 55419-2013: Composite material based on active rubber powder, modifying asphalt mixes. Technical requirements and test methods

Manual: Manual for impulse and low consumption fire extinguishing systems

ODM 218.2.001-2007: Method for determining the crack resistance of polymersphalt concrete at low temperatures (for experimental use)

ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads

ODM 218.2.022-2012: Guidelines for the reuse of asphalt concrete in the construction (reconstruction) of roads

ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction

ODM 218.2.034-2013: Guidelines for the preparation and use of asphalt mix using recycled asphalt

ODM 218.2.056-2015: Guidelines for the design of non-rigid pavements in terms of exposure to heavy freight traffic (for highways I-II categories)

ODM 218.2.079-2016: Recommendations about design macrorough pavings

ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)

ODM 218.3.001-2007: Methodical recommendations on the technology of using the cadem-type surfactant additive Cadem-VT in the construction of asphalt concrete pavements

ODM 218.3.004-2010: Guidelines for the thermal profiling of asphalt concrete pavements

ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings

ODM 218.3.021-2011: Guidelines for the selection of compositions of asphalt mixes, taking into account the effect of adhesive additives on the aging of organic binders in bitumen-mineral mixtures

ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation

ODM 218.3.041-2014: Guidelines for the reinforcement of asphalt concrete pavement layers with steel nets

ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei

ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers

ODM 218.3.055-2015: Guidelines for the preparation of asphalt samples with roller (plate) compactor

ODM 218.3.058-2015: Guidelines for the use of synthetic fiber for dispersed reinforcement of hot asphalt concrete

ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads

ODM 218.3.073-2016: Recommendations for the use of impregnating compositions to improve the durability of asphalt concrete pavements

ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete

ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District

ODM 218.3.102-2017: Guidelines for the construction of asphalt pavement under adverse weather conditions

ODM 218.5.001-2014: Guidelines for the quality control of asphalt concrete in laboratory and production conditions using impact compactor

ODM 218.5.002-2009: Guidelines for the construction of asphalt concrete layers using mix loading cranes

PNST 105-2016: Sulfur concrete mixtures and sulfur concrete. General specifications

PNST 191-2017: Sulfur asphaltic concrete mixtures and sulfur asphaltic concrete. Specifications

PNST 192-2017: A mixture of crushed stone-mastic sulfur asphalt and stone-mastic sulfur asphalt. Specifications

PNST 266-2018: Cast sulfur asphalt mixture and cast sulfur asphalt. Specifications

PNST 306-2018: Automobile roads of general use. Organo-mineral cold mixes with addition of recycled asphalt concrete pavement (RAP). Specifications

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

SNiP I-D.2-70: Car roads. Materials and products

SP 121.13330.2012: Aerodromes

SP 37.13330.2012: Industrial transport

SP 78.13330.2012: Automobile roads

STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)

TR 103-00: Guide to Good Practice for Constriction of Roads Using Asphalt Concrete

TR 103-07: Technical recommendations for the construction of road structures using asphalt concrete

TR 134-03: Technical recommendations for the installation and commissioning of pavements, taking into account the requirements of international standards for evenness

TR 171-06: Technical recommendations on the composition and technology of pavement repair using cold bitumen-mineral mixtures (cold asphalt)

TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives

TR 94.14-01: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 14: Quality Control of Construction of Asphalt Concrete Roads

TU 5718-001-00011168-2000: Gravel-Mastic Asphalt Concrete Mixes and Asphalt Concrete

TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete

TU 5718-001-58528024-04: BITREK Technical Specifications. Bitumen Resin Environmentally Friendly Composite Materials

TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes

TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures

VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use

ODM 218.3.064-2019: Guidelines for evaluating the effectiveness of adhesive additives in the composition of asphalt concrete

ODM 218.3.108-2019: Guidelines for the application of various methods of compaction of asphalt mixtures in the laboratory

ODM 218.9.079-2016: Recommendations about design macrorough pavings

PNST 362-2019: General automobile roads. Cold asphalt mixes and asphalt mixes. Technical conditions

TU 5718.030.01393697-99: Mixes asphalt concrete crushed stone and mastic and asphalt concrete. Technical specifications

VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements

Customers Who Viewed This Item Also Viewed:

Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Seamless steel pipes for boiler plants and pipelines
Language: English
Price: $408.80
Explosive atmospheres. Part 0. Equipment. General requirements
Language: English
Price: $1,118.41
Loads and actions
Language: English
Price: $495.00
The method of gas chromatographic determination of phenol and epichlorohydrin in model environments imitating food products
Language: English
Price: $444.92
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
Language: English
Price: $155.43
Vessels and apparatus. Norms and methods of strength calculation. Requirements for the form of submission of strength calculations performed on a computer
Language: English
Price: $99.00
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Thermal-sensitive paper for printing devices. General specifications
Language: English
Price: $153.26
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.20
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Vessels and apparatus. Norms and methods of strength calculation. Strengthening the holes in the shells and bottoms at internal and external pressures. Calculation of the strength of the shells and the bottoms with external static loads on the fitting
Language: English
Price: $227.70
Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections
Language: English
Price: $227.70
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $473.36
Seismic building design code
Language: English
Price: $594.00
Explosive atmospheres. Part 15. Equipment with type of protection
Language: English
Price: $890.46
Non-destructive testing. Optical methods. General requirements
Language: English
Price: $121.77
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!