SanPiN 2.2.1/2.1.1.1031-01
СанПин 2.2.1/2.1.1.1031-01
|
|
Project work, construction, reconstruction and operation of enterprises, planning and development of inhabited areas. Sanitary protection zones and sanitary classification of enterprises, installations and other sites
Проектирование, строительство, реконструкция и эксплуатация предприятий, планировка и застройка населенных мест. Санитарно-защитные зоны и санитарная классификация предприятий, сооружений и иных объектов
Status: Not effective - Superseded
The rules establish mandatory hygienic requirements for the size of sanitary protection zones, depending on the sanitary classification of enterprises, structures and other objects, requirements for their organization and improvement, and grounds for revi
Правила устанавливают обязательные гигиенические требования к размеру санитарно-защитных зон в зависимости от санитарной классификации предприятий, сооружений и других объектов, требования к их организации и благоустройству, основания к пересмотру этих ра
Choose Language:
Format: Electronic (pdf/doc)
Approved: Chief State Sanitary Doctor of the Russian Federation,
5/17/2001
SKU: RUSS19715
The Product is Contained in the Following Classifiers:
Highways (Max) »
Engineering surveys for construction of roads and artificial structures »
6. Ecological surveys in design of roads »
Highways (Max) »
Design, construction, repair and maintenance of roads »
13. Ecological requirements and environmental protection in design and construction of roads »
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of State Committee for Sanitary and Epidemiological Supervision and Ministry of Health of Russian Federation »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.5 Environmental monitoring and control »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
2 Requirements of occupational health to placement, design, construction, reconstruction and operation of production facilities »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.030 Waste »
13.030.01 Waste in general »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.040 Air quality »
13.040.01 Air quality in general »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.01 General water quality »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
13.080.01 Soil quality and soil science in general »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
The Document is Replaced With:
Decree 38: SanPiN 2.2.1 / 2.1.1.1200-03 Sanitary protection zones and sanitary classification of enterprises, structures and other facilities
SanPiN 2.2.1/2.1.1.1200-03: Sanitary-protective zones and sanitary classification of enterprises, constructions and other objects
As a Replacement Of:
SanPiN 2.2.1/2.1.1.984-00: The design, construction, modernization and operation of enterprises, planning and development of residential areas. The Sanitary Protection Zones and
The Document References:
Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being
SanPiN 2.2.1/2.1.1.984-00: The design, construction, modernization and operation of enterprises, planning and development of residential areas. The Sanitary Protection Zones and
SanPiN 2971-84: Sanitary Regulations for the Protection of the Public Against Electrical Fields Generated by Overhead Power Transmission Lines for Power Frequency Alternating Current
SN 2.2.4/2.1.8.562-96: Noise exposure in work environment, residential premises, premises of public buildings and in dwellings zones
The Document is Referenced By:
Decree 38: SanPiN 2.2.1 / 2.1.1.1200-03 Sanitary protection zones and sanitary classification of enterprises, structures and other facilities
GOST R 52037-2003: Shallow ground (near surface) repository for radioactive waste disposal. General requirements
GOST R 58148-2018: Opencast diamond development in cryolithozone. Design requirements
Manual for MGSN 4.08-97: Mass types of fitness centers. Issue 1 General Provisions. Buildings close to housing. Fitness clubs of microdistricts. Children and youth sports schools
Manual for MGSN 4.08-97: Mass types of fitness centers. Issue 2. Fitness centers of municipal areas. Complexes of sports and recreational facilities
Manual for MGSN 4.08-97: Mass types of fitness centers. Issue 3. Specialized sports clubs
MDK 11-01.2002: Recommended Practice for Procedure for Burial and Cemetery Maintenance in the Russian Federation
MDS 11-16.2002: Guidelines for drafting an engineering plan for civil defense
MGSN 4.06-03: Educational institutions. Moscow
MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE
Mos MU 2.3.4.003-2002: Procedural Guidelines for Facilities (Shops) Producing Salad Products in the City of Moscow
Mos MU 2.3.4.011-2002: Procedural Guidelines for Facilities for Packaging Grocery Products in Moscow
MU 2.1.7.1185-03: Collecting, transportation and disposal of asbestos containing waste
NTP-APK 1.10.03.002-02: Engineering Design Standards for Goat Breeding Facilities
NTP-APK 1.10.04.002-02: Engineering Design Standards for Camel Breeding Facilities
NTP-APK 1.10.04.003-03: Standards for technological design of equestrian complexes
NTP-APK 1.10.07.001-02: Engineering Design Standards for Veterinary Facilities for Livestock Raising, Fur-Farming, Poultry-Raising Facilities and Farms
NTP-APK 1.10.07.002-02: Engineering Design Standards for Veterinary Facilities for Cities and Other Populated Areas
NTP-APK 1.10.07.003-02: Engineering Design Standards for Animal Artificial Insemination Stations
NTP-APK 1.10.09.001-02: Standards for technological design of breeding complexes and reproduction greenhouses
NTP-APK 1.10.10.001-02: Engineering Design Standards for Grain Seed Companies and Small-Capacity Grain Processing Facilities
NTP-APK 1.10.13.001-03: Norms of technological design of warehouses of solid mineral fertilizers and chemical ameliorants
NTP-APK 1.10.13.002-03: Technological design norms for warehouses of liquid matters for chemicalization
NTP-APK 1.10.13.003-03: Technological design standards for pesticide stores
NTP-APK 1.10.17.001-03: Standards for technological design of bases and warehouses for general-purpose enterprises for resource provision
Order 895: Labor protection rules for the production of baker's yeast
RD 153-39.4-113-01: Standards for technological design of main pipelines
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SanPiN 2.2.1/2.1.1.1200-03: Sanitary-protective zones and sanitary classification of enterprises, constructions and other objects
SanPiN 2.4.1.1249-03: Sanitary andepidemiological requirements for organization, content and operating mode of preschool educational institutions
SanPiN 2.4.2.1178-02: Hygienic requirements to training conditions in educational institutions
SanPiN 2.4.4.1251-03: Sanitation and Disease Control Regulations for Facilities for Continuing Education of Children (Off-School Facilities)
SNiP 32-02-2003: Subways
SP 11-112-2001: The procedure for development and composition of the section "Engineering civil defence measures. Measures for the prevention of emergencies" for urban planning documentation for the areas of urban and rural settlements and other municipality subjects
SP 11-113-2002: The reporting on the engineering civil defence measures and activities to prevent emergencies in the preparation of an application of intent to invest in the construction and justification of investment in the construction of enterprises, buildings and structures
SP 120.13330.2011: Subways
SP 2.2.1289-03: Hygienic Requirements for Chemical Cleaning of Domestic Products
SP 3.5.1378-03: Sanitation and Disease Control Regulations for Organization and Execution of Disinfecting Activity
SP 89.13330.2012: Combustion boiler systems of heating generation
STA 25.03.02-2004: Combined security system
TSN 30-305-2002: Urban planning. Reconstruction and development of non-central areas of St. Petersburg
TSN 30-306-2002: Reconstruction and development of historically developed areas of St. Petersburg
TSN 30-307-2002: Design Standards for Integrated Site Improvements and Amenities in the City of Moscow
TSN 30-309-2003: Planning and development of urban areas of the Republic of Bashkortostan under reconstruction
TSN 30-310-2003: Garbage disposal and arrangement of landfills for the disposal of municipal solid waste from rural settlements. Samara Region
TSN 31-325-2002: General educational institutions (including boarding schools for children with disabilities). St. Petersburg
VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank
VNP-10041-2002: Departmental norms and rules for creating coastal fishing enterprises. Treatment facilities
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
VRD 39-1.10-069-2002: Provisions on technical operation of gas distribution stations of gas mains
VRD 39-1.13-057-2002: Work Management Procedure for Environmental Protection During Well Construction
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
VSN 13-2002: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
