PB 08-624-03
ПБ 08-624-03
|
|
Safety Regulations for oil and gas industry
Правила безопасности в нефтяной и газовой промышленности
Status: Not effective - Canceled. By order of the Federal Service for Ecological, Technological and Atomic Supervision dated March 12, 2013 No. 101, the Resolution of the Federal Mining and Industrial Supervision of Russia dated June 05, 2003 No. 56 was deemed to be non-applicable (the order shall enter into force six months after its official publication , the text of the order is published in the Bulletin of regulatory acts of federal executive bodies of June 17, 2013 No. 24)
The rules establish the requirements, procedures and conditions for the conduct of work in the design, construction, reconstruction, operation, conservation and liquidation of production facilities; designing, manufacturing, repairing machines, mechanisms, other technical devices; development of technological processes; training and certification of employees; organization of production and labor; the interaction of Gosgortekhnadzor of Russia with organizations to ensure safe production conditions and the rational use of natural resources
Правилами установлены требования, процедуры и условия ведения работ при проектировании, строительстве, реконструкции, эксплуатации, консервации и ликвидации производственных объектов; конструировании, изготовлении, ремонте машин, механизмов, других технических устройств; разработке технологических процессов; подготовке и аттестации работников; организации производства и труда; взаимодействии Госгортехнадзора России с организациями по обеспечению безопасных условий производства и рационального использования природных ресурсов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
6/5/2003
SKU: RUSS19716
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Welding materials »
Gases »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.6. Objects of oil and gas industry »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.2 Industrial safety requirements in oil and gas industry »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.020 Production and processing of oil and natural gas »
The Document is Replaced With:
Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"
As a Replacement Of:
RD 08-200-98: Safety rules in the oil and gas industry
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Code 197-FZ: Labor Code of the Russian Federation
Federal Law 128-FZ: Amendments to the Russian Federation Laws
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 2.301-68: Unified system for design documentation. Formats
GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements
NPB 105-03: Determination of categories of rooms, buildings and external installations on explosion and fire hazard
NPB 107-97: Determination of Categories of External Installations on Fire Hazard
PB 03-246-98: Rules for audit of industrial safety
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PB 03-440-02: Attestation rules for nondestructive inspection personnel
PB 03-517-02: Regulations for Organizations Executing Activity in the Field of Industrial Safety at Hazardous Production Facilities
PB 03-605-03: Rules of design of vertical cylindrical steel tanks for oil and petroleum products
PB 09-170-97: General rules on explosion safety for explosive- and fire-hazardous chemical, petrochemical plants and oil refineries
PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries
PB 13-407-01: Uniform Safety Requirements for Blasting Operations
RD 03-14-2005: Procedure for completing a declaration of industrial safety for hazardous production facilities (dos) with a list of required information
RD 03-19-2007: Regulations on the organization of work on the training and certification of specialists of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision
RD 03-20-2007: Regulations on the organization of training and knowledge testing of workers of organizations supervised by the Federal Service for Environmental, Technological and Atomic Supervision
RD 03-28-2008: Procedures of technical investigation of accidents and emergency situations at facilities supervised by the Federal Service for Environmental, Technological and Nuclear Supervision
RD 03-293-99: Statute laying down a procedure for technical inquiry into the causes of failures at hazardous production facilities
RD 03-294-99: Regulations on the registration of objects in the state register of hazardous production facilities and maintaining the state register
RD 03-315-99: Regulations on a procedure for submitting the industrial safety declaration in proper form and on data contained in such submittal
RD 03-444-02: The provision of procedure for training and qualification test of workers of organizations engaging in activities of industrial safety of hazardous industrial sites under supervision of Gosgortekhnadzor, Russia
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 06-150-97: Instructions on the procedure for technical investigation and recording of the loss of explosive materials in organizations, enterprises and objects controlled by the Gosgortechnadzor of Russia
RD 07-291-99: Instruction on procedure of Hazardous Industrial Sites abandonment and conservation, involved in subsoil use
RD 08-200-98: Safety rules in the oil and gas industry
RD 08-425-01: Regulations for Considering Documents on Device used at Oil/Gas Producing and Gas Processing Plant, Exploration Prospects and Main Gas-, Oil- and Product Pipelines; the Regulations for Device Acceptance Tests and Application permits
RD 08-492-02: Federal Mining and Industrial Inspectorate of Russia Resolution of 22 May 2002 No. 22 On Approval of A Normative Legal Act
RD 10-528-03: Regulation on the examination of industrial safety of hazardous production facilities that use lifting equipment
RD 13-193-98: Regulations on the procedure for granting the right of management of mining and explosive operations in organisations, companies and entities subject to the monitoring of the GGTN of Russia
RD 13-415-01: Procedural Ordinance on Training and Testing of Personnel for Blasting Operations
The Document is Referenced By:
ATK-RE 2011: Shell and tube heat exchangers and "pipe in pipe" heat exchangers. Manual
ATK-RE 2013: Shell-and-tube heat exchangers and pipe-in-tube heat exchangers manufactured according to TU 3612-005-00220302, TU 3644-006-00220302, TU 3612-017-00220302, TU 3612-013-00220302, TU 3612-014-00220302, TU 3612-013 023-00220302, TU 3612-024-00220302, TU 3612-100-00220302. Manual
GOST 12.2.228-2004: Occupational safety standards system. Tools and service work-over rigs for work-over of oil wells. Safety requirements
GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements
GOST 22387.2-2014: Combustible natural gases. Methods for determination of hydrogen sulphide and mercaptan sulphur
GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications
GOST 8.624-2013: State system for ensuring the traceability of measurements. Laboratory water in crude oil analysers. Verification method
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 53679-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 1. General principles for selection of cracking-resistant materials
GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements
GOST R 53709-2009: Oil and gas wells. Geophysical researches and works in wells. General requirements
GOST R 53713-2009: Oil and gas-oil fields. Rules of development
GOST R 53762-2009: Natural combustible gases. Determination of hydrocarbon dew point temperature
GOST R 53763-2009: Natural combustible gases. Determination of water dew point temperature
GOST R 54389-2011: Stable gas condensate. Specifications
GOST R 55074-2012: Chemical resistance polymer composites for lining industrial tanks and vessels. General specifications
GOST R 55141-2012: Associated gas processing. Small-sized block gas - processing complexes. General technical requirements
GOST R 55414-2013: Gas, gas condensate, oil-gas and oil-gas condensate fields. Specifications for technical project of field development
GOST R 55781-2013: Means of delivering cement. Technical conditions
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
GOST R 56006-2014: Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements
GOST R 56021-2014: Liquefied natural gas. Fuel for internal-combustion engine and generating unit. Specifications
GOST R 8.741-2011: State system for ensuring the uniformity of measurements. Volume of natural gaz. General requirements for measurement procedure
GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements
MI 1974-2004: State system for ensuring uniformity of measurements. Turbine flow transducers. Method of verification
MI 2904-2005: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic counters Altosoni-5 (mod. Altosoni-5M). Methods of calibration testing by a truboporshnevoy calibration unit at the metering of petroleum products
MI 2956-2005: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic transducers of oil consumption with a nominal diameter of 400 mm and more. Method of verification
MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´
MI 2974-2006: State system of measuring uniformity provision. Class 2 piston-pipe calibration rigs. Verification method for class 1 piston-pipe calibration rig with comparator
MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'
MI 3021-2006: State system for ensuring uniformity of measurements. Natural gas consumption. Methods of measurement measurement systems with flow meters-meters RS-SPA-M
MI 3081-2007: Systems of measurement of quantity and quality of oil, light petroleum products and liquid hydrocarbons. Maintenance and repair. Basics
MI 3118-2008: Recommendation. State system for ensuring uniformity of measurements. Density and viscosity converters measuring models 7827 and 7829. Methods of monitoring the metrological characteristics during operation
MI 3119-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Methods of calibration at the place of operation
MI 3151-2008: GSE. Mass flow meters. Methods of verification at the site of operation of a piston-calibration calibration unit complete with a flow density converter
MI 3189-2009: State system for ensuring uniformity of measurements. Mass flow meters Micro Motion from "Emerson Process Management". Methods of calibration with a set of pipe piston calibration installation or compact prover and flow density converter
MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi
MI 3213-2009: State system for ensuring uniformity of measurements. Consumption and volume of gas. Methods of measurement using ultrasonic flow transducers
MI 3265-2010: State system for ensuring uniformity of measurements. Ultrasonic flow transducers. On-site verification method
MI 3266-2010: State system for ensuring uniformity of measurements. Converters volumetric flow reference. Method of verification
MI 3267-2010: State system for ensuring uniformity of measurements. Volume flow transducers. Method of calibration using a standard volume flow converter
MI 3270-2010: State system for ensuring uniformity of measurements. The content of droplet fluid in the stream of natural and associated gas. Measurement Technique
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3312-2011: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic flow transducers. Methods of calibration with a set of pipe piston calibration installation, in-line density converter and mass flow meters
MI 3372-12: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Systems for measuring the quantity and quality of petroleum products. General technical and metrological requirements
MI 3380-2012: State system for ensuring uniformity of measurements. Volume flow transducers. Methods of verification on-site calibration equipment
Order 101: Federal norms and rules in the field of industrial safety "Safety rules in the oil and gas industry"
Order 1155: Model program on the course "Industrial, Environmental, Energy Safety, Safety of Hydraulic Structures" for pre-certification (pre-examination) training of managers and specialists of organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
PB 08-37-2005: Exploration Safety Rules
PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits
PR 50.2.019-2006: The state system of measurements. Methods of measurement using the turbine, rotary and vortex meters
R 50.2.052-2006: State system for provision of uniformity of measurements. Procedure of validation of crude oil and oil gas output measuring devices conformity to metrological and technical requirements of GOST R 8.615-2005' State system for provision of uniformity of mea
RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair
RD 08-254-98: Instruction to prevent water surface oil leaks and blowouts when building and maintaining wells in oil and gas industry
RD 08-272-99: Safety requirements for drilling equipment for the oil and gas industry.
RD 08-435-02: Safety Instructions on Drilling Operations Wells
RD 08-625-03: Instructions for the safety of work in the recovery of inactive oil and gas wells by building an additional directional or horizontal wellbore.
RD 13-07-2007: Methodical instructions on the procedure for the inspection of organizations performing work on the current, overhaul and reconstruction of oil and gas wells
RD 153-39.0-062-00: Technical instruction on layers tests by tube instruments
RD 153-39.1-561-08: Instructions for the construction, operation and repair of pipelines from metal-plastic pipes
RD 39-00147001-773-2004: Method of monitoring drilling mud parameters
RMG 99-2010: State system for ensuring the uniformity of measurements. Procedure of metrological and technical ensuring of operation of measuring systems for oil quantity and quality metrics, pipe-piston calibration setup and measuring instruments as their components
SA-03-003-07: Stressing and vibration calculation of steel industrial pipelines.
SO 01-05-AKTNP-002-2004: On automation and telemechanization of installations of pipeline transportation system of oil products of JSC "AK" Transnefteprodukt "
SP 86.13330.2014: Main (Trunk) pipelines
ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities
ST TsKBA 008.1-2007: Pipe fittings. Calculation and evaluation of reliability indicators and assigned indicators at the design stage. Part 1. Method of calculating and evaluating reliability indicators and assigned indicators at the design stage
ST TsKBA 008-2011: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 3742-011-34390194-2003: Check valves DN 100-1400 PN 8, 0 MPa; PN 12, 5 MPa; PN 16, 0 MPa. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
