Pipes of brass
Status: Restored in the Russian Federation for individual industries. By order of the Federal Agency for Technical Regulation and Metrology dated 01.03.2016 No. 101-st, it was restored on the territory of the Russian Federation only in relation to products delivered under the State Defense Order; IUS 6-2016
The standard applies to brass round drawn, cold rolled and extruded pipes for general use.
Стандарт распространяется на латунные круглые тянутые, холоднокатаные и прессованные трубы общего назначения.
Format: Electronic (pdf/doc)
Page Count: 36
Approved: USSR State Committee for Product Quality and Standards Management,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.5 Non-ferrous metal products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.15 Non-ferrous metal pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.15 Pipes from non-ferrous metals »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V64 Pipes from non-ferrous metals and alloys »
The Document is Replaced With:
GOST 494-2014: Brass tubes. Specifications
As a Replacement Of:
GOST 494-76: Pipes of brass
The Document References:
GOST 10006-80: Metal pipes
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 1173-93: Copper strips. Specifications
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 14192-96: Cargo marking
GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications
GOST 15527-2004: Pressure treated copper zinc alloys (brasses). Grades
GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 1652.10-77: Copper-zinc alloys. Methods for the determination of aluminium
GOST 1652.11-77: Copper-zinc alloys. Methods for the determination of nickel
GOST 1652.12-77: Copper-zinc alloys. Methods for the determination of silicon
GOST 1652.13-77: Copper-zinc alloys. Methods for the determination of phosphorus
GOST 1652.1-77: Copper-zinc alloys. Methods for the determination of copper
GOST 1652.2-77: Copper-zinc alloys. Methods for the determination of lead
GOST 1652.3-77: Copper-zinc alloys. Methods for the determination of iron
GOST 1652.4-77: Copper-zinc alloys. Methods for the determination of manganese
GOST 1652.5-77: Copper-zinc alloys. Methods for the determination of tin
GOST 1652.6-77: Copper-zinc alloys. Methods for the determination of antimony
GOST 1652.7-77: Copper-zinc alloys. Methods for the determination of bismuth
GOST 1652.8-77: Copper-zinc alloys. Methods for the determination of arsenic
GOST 1652.9-77: Copper-zinc alloys. Methods for the determination of sulphur
GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 19041-85: Transportation packages and multi-packages of sawn timber. Packaging, marking, transportation and storage
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications
GOST 24047-80: Half-finished products out of non-ferrous metals and their alloys. Sampling for tensile test
GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 26877-91: Metal products
GOST 28548-90: Steel tubes. Terms and definitions
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8695-75: Tubing (pipes). Flattening testing method
GOST 9557-87: Flat wooden pallets with dimensions 800ґ1200 mm
GOST 9716.1-79: Copper-zinc alloys. Method of spectral analysis of metal standard specimens with photographic registration of spectrum
GOST 9716.3-79: Copper-zinc alloys. Method of spectral analysis of oxide specimens with photographic registration of spectrum
GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
TU 48-21A-005-89: Specialty containers for pipes
The Document is Referenced By:
GOST 11614-94: Semi-automatic flushing valves. Specifications
GOST 12644-80: Hollow and semi-hollow rivets. Specifications
GOST 13211-80: Shell and tube water-oil and water-water type coolers of diesels engines and gas engines. General specifications
GOST 19397-74: Net-shaped vents for core boxes. Design and dimensions
GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications
GOST 23289-94: Waste water drain sanitary accessories. Specifications
GOST 2622-75: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 27590-2005: House-tube water-watered heat supply systems. General specifications
GOST 28873-90: Alloys on the basis of heavy non-ferrous metals treated under pressure. Unified grades
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
OST 108.271.106-76: Water-steam heaters. 2000 mm tubing. Design and dimensions.
OST 108.271.107-76: Water-steam heaters. 3000 mm tubing. Design and dimensions.
OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 10-115-96: Regulations of design and safe operation of pressure vessels
RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation
RD 34.37.407: Procedural Guidelines for Pre-Startup Steam-Oxygen Cleaning and Passivation of Steam-Water Line of Thermal Energy Equipment
RD 34.40.503-94: Model Guidelines for Operation System Water Heating Units at Thermal Power Stations and Condensing Electric Power Generating Stations
RST RSFSR 92-83: Musical wind instruments. General technical conditions
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
Customers Who Viewed This Item Also Viewed:
Special railway rolling stok. Dynamic and strength testing procedures
Blanks for marine shafts and rudder stocks. Specifications
Tempered glass. Specifications.
Glass with low emissivity hard coating. Specifications.
Glass laminated. Specifications.
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.