GOST 8.009-84
ГОСТ 8.009-84
|
|
State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
Государственная система обеспечения единства измерений Нормируемые метрологические характеристики средств измерений
Status: Effective
The standard applies to measuring instruments and establishes the nomenclature of metrological characteristics (MX), the rules for choosing complexes of standardized MX (NMH) for specific types of measuring instruments and methods for adjusting MX in regulatory technical documents (STD) to measuring instruments: in general technical standards and standards general technical requirements for measuring instruments; standards of technical conditions and standards of technical requirements for measuring instruments; in technical conditions for measuring instruments; in technical tasks for the development of measuring instruments. The standard does not apply to standards, calibration equipment and measuring instruments designed as exemplary.
Стандарт распространяется на средства измерений и устанавливает номенклатуру метрологических характеристик (МХ), правила выбора комплексов нормируемых МХ (НМХ) для конкретных типов средств измерений и способы нормирования МХ в нормативно-технических документах (НТД) на средства измерений: в стандартах общих технических условий и стандартах общих технических требований на средства измерений; стандартах технических условий и стандартах технических требований на средства измерений; в технических условиях на средства измерений; в технических заданиях на разработку средств измерений. Стандарт не распространяется на эталоны, поверочные установки и средства измерений, разработанные как образцовые.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
7/13/1984
SKU: RUSS19790
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.3 Metrology »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
As a Replacement Of:
GOST 8.009-72: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
The Document References:
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements
MI 1317-2004: State system for ensuring uniformity of measurements. Results and characteristics of the measurement error. Forms of representation. Ways to use during testing of product samples and control over the parameters of product samples and control of their para
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
RD 50-206-80: Guidelines. Rationing and determination of the metrological characteristics of the measuring transducers of the code into a constant voltage and current
The Document is Referenced By:
Decision 189: About the classifier of metrological characteristics
GOST 10374-82: Multi-scale portable measuring instruments. General technical specifications
GOST 12.0.005-2014: System of labor safety standards Metrological support in the field of occupational safety. The main provisions
GOST 12997-84: SSI Products. General specifications
GOST 13033-84: Gsp. Electrical analog equipment and means for automation
GOST 13053-76: Ssi pneumatic instruments and devices
GOST 13384-93: Measuring transducers for thermoelectric transducers and resistance thermo-transducers. General technical requirements and methods of tests
GOST 14014-91: Digital instruments and measuring transducers of voltage, current and resistance
GOST 19875-79: Self-recording quickly-responding electrical measuring instruments
GOST 20397-82: Technical facilities for minicomputers. General technical requirements, acceptance, methods of testing, marking, packaging, transportation and storage, manufacturer's warranties
GOST 20790-82: Medical instruments, apparatus and equipment. General specifications
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 22.2.05-97: Safety in emergencies. Technogenic crashes and catastrophes. Standardized metrological and accurate characteristics of control means and testing means used in complicated technical systems, forms and procedures of their metrological service. General statements and rules
GOST 22018-84: Amperometric analysers for dissolved oxygen SSI. General technical requirements
GOST 22171-90: Laboratory conductometric analysers of liquid. General specifications
GOST 22261-94: Measuring instruments for electrical
GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp
GOST 22521-85: Pressure, vacuum and pressure difference transmitters with pneumatic analogue output signal of gsp (state system of industrial devices and automation systems)
GOST 23061-2012: Soils. Methods for radioisotope measurement of density and humidity
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
GOST 23382-78: Piezosorption hygrometers. General specifications
GOST 23479-79: Non-destructive testing. Optic methods. General requirements
GOST 23483-79: Non-destructive testing. Thermal methods. General requirements
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 24469-80: Instruments for measurements of laser radiation parameters
GOST 24855-81: Analog converters for measurement of current, voltage, power, frequency, resistance
GOST 25242-82: A.C. Digital automatic balanced bridges. General specifications
GOST 25242-93: Digital immitance parameter meters
GOST 25373-82: Measuring lasers. Types, basic parameters and technical requirements
GOST 26.004-85: System means of measurement and automation. Range of the main technical parameters
GOST 26.006-79: Uniform system of standardization in instrument making. Measuring and automation devices. Marking, packing
GOST 26.203-81: Measure-computering complexes. Classification. General requirements
GOST 26033-91: Metering amplifiers of direct current and its voltage. General technical requirements and methods of tests
GOST 26116-84: Well-logging apparatus.
GOST 26364-90: Ferritometers for austenitic steels. General specifications
GOST 26635-85: Nuclear power vessel-encapsulated pressurized-water reactor. General requirements to in-core reactor monitoring system
GOST 26655-85: Technical diagnostics. Diagnostics of motor vehicles, tractors, construction and road machines. Pick-ups. General technical requirements
GOST 26783-85: Error rate meters for time division multiplex transmission systems. Types and basis parameters
GOST 28836-90: Resistive strain-gauge
GOST 28841-90: Machines for fatigue testing of materials
GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements
GOST 29024-91: Turbidimetric and nephelometric liquid analyzers
GOST 29075-91: Nuclear instrumentation systems for nuclear power stations. General requirements
GOST 29226-91: Viscometers for liquids
GOST 30421-96: Electrical capacitance, pure resistance and dissipation factor high-voltage meters. General specifications
GOST 32019-2012: Technical condition monitoring of the unique buildings and constructions. Rules of design and installation of permanent systems (stations) of monitoring
GOST 33435-2015: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST 33530-2015: Assembly tools for standardized tightening of threaded connections. Torque wrenches. Basic specifications
GOST 34012-2016: Railway automatics and telemechanics equipment. General technical requirements
GOST 34081-2017: Buildings and constructions. Determination of pitch parameters of natural oscillations
GOST 34832-2022: Means of technical diagnostics and monitoring of power supply facilities of high-speed railway lines. General technical requirements
GOST 34913-2022: Systems of technical diagnostics and monitoring of railway automatics and telemechanics of high-speed railway lines. General technical requirements
GOST 4.158-85: System of product-quality indices. Volumetric, velocity counters, batchmeters and flowmeters. Electromagnetic flowmeters. Vortex flowmeters, batchmeters and metering plants. Nomenclature of indices
GOST 4.166-85: Product-quality index system. Analysers of liquid. Nomenclature of indices
GOST 4.170-85: System of product-quality indices. Analysers for aerosols of solid and granular materials. Nomenclature of indices
GOST 4.174-85: System of product-quality indices. Thermoelectric temperature transducers. Pyrometers. Nomenclature of indices
GOST 4.186-85: System of product-quality indices. Automatic servo-balancing instruments. Nomenclature of indices
GOST 4.316-85: System of product-quality indices. Power, small, measuring transformer. Complete transformer substations. High-voltage bushings. Nomenclature of indices
GOST 4.374-85: Product-quality index system. Gas analysers. Index nomenclature
GOST 4.385-85: Product-quality index system. Meters for mognetic induction and meters for magnetic flux. Index nomenclature
GOST 4.446-86: System of product-quality indices. Measuring means for linear and angular measurements in mechanical engineering. Nomenclature of indices
GOST 4.450-86: Product-quality index system. Instruments for spectral analysis. Nomenclature of indices
GOST 4.59-79: Product-quality index system. Means of measuring ionizing radiations. Nomenclature of indices
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.010-90: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST 8.061-80: State system for ensuring the uniformity of measurements. Verification schedules. Scope and layout
GOST 8.122-85: State system for ensuring the uniformity of measurements. Rotameters. Methods of verifications
GOST 8.122-99: State system for ensuring the uniformity of measurements. Rotameters. Methods of verification
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements
GOST 8.587-2019: State system for ensuring the uniformity of measurements. The mass of oil and petroleum products. Measurement procedures (methods)
GOST 8.632-2013: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
GOST 9986-78: SSI. Electropneumatic analogue transducers. General specifications
GOST R 12.1.031-2010: Occupational safety standards system. Lasers. Methods of dosimetric control of laser radiation
GOST R 15.013-94: System of product development and launching into manufacture. Medical products
GOST R 22.2.05-94: Safety in emergencies. Technogenic crashes and catastrophes. Standardized metrological and accuracy characteristics of control means and testing means used in complicated technical systems, forms and procedures of their metrological service. General statements and rules
GOST R 22.9.15-2014: Safety in emergencies. Technical means of chemical detection. Test methods
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 50759-95: Gas analyses for control of industrial and transport emissions. General specifications
GOST R 50760-95: Gas and aerosol analysers for air pollution monitoring. General specifications
GOST R 51254-99: Assembly tools for standardized tightening of threaded connections. Torque wrenches. Basic specifications
GOST R 51559-2022: Power oil transformers of 110 and 220 kV voltage classes and autotransformers of 27,5 kV voltage class for AC traction railway power supply systems. General specifications
GOST R 51945-2002: Aspirators. General specifications
GOST R 52122-2003: Technical diagnostics. Mainline locomotives. On-board diagnostic systems. General requirements
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 53375-2016: Oil and gas wells. Geological-technological logging. General requirements
GOST R 53466-2009: Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters
GOST R 54773-2011: Anchor supports. Test methods for anchor
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 54859-2011: Buildings and constructions. Definition of the parameters of the basic tone of free oscillations of buildings
GOST R 55369-2012: Railway automatics and telemechanics equipment. General technical requirements
GOST R 55867-2013: Air transport. Metrological support on air transport. General principles
GOST R 55974-2014: Sensors and transforming equipment space rocket technology. The composition and presentation of technical data in the design and operational documentation
GOST R 56511-2015: Non-destructive testing. Methods of heat kind. General requirements
GOST R 57111-2016: Specialized food products. Order to control the content of nanomaterials used in agriculture
GOST R 57121-2016: Intelligent terminal for feeder bay of traction substations, for pole-mounted substations and for specific electric railways equipment. Technical requirements
GOST R 57395-2017: Angle-to-digit converters. General requirements for measuring instruments, testing and monitoring of input and output parameters
GOST R 58274-2018: Space systems. Metrological provision of technological preparation of production. Main provisions
GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements
GOST R 58929-2020: A system for ensuring the uniformity of measurements at enterprises of the aviation industry. Metrological support of aircraft products
GOST R 58930-2020: A system for ensuring the uniformity of measurements at enterprises of the aviation industry. Metrological support of automated control devices
GOST R 8.1015-2022: State System for Ensuring Uniformity of Measurements (GSI). Metrological expertise of normative and technical documentation in the field of atomic energy use. Organization and basic requirements to the content
GOST R 8.595-2002: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements
GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
GOST R 8.632-2013: State system of ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Basic principles
GOST R 8.642-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
GOST R 8.661-2009: State system for ensuring the uniformity of measurements. Oil moisture meters. Norms of metrological characteristics
GOST R 8.674-2009: State system for ensuring the uniformity of measurements. General requirements for measuring instruments and systems and devices with measuring function
GOST R 8.728-2010: State system for ensuring the uniformity of measurements. Estimation of errors of measurements of thermal energy and weight of the heat-carrier of water systems of the heat supply
GOST R 8.734-2011: State system for ensuring the uniformity of measurements. Intelligent sensors and intelligent measuring systems. Methods of metrological self-checking
GOST R 8.739-2011: State system for ensuring the uniformity of measurements. Etalons for coordinate-temporal measurements. Basic principles. Ways for expressing the errors
GOST R 8.778-2011: State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST R 8.785-2012: State system for ensuring the uniformity of measurements. Mass of hydrocarbon condensate, liquefied hydrocarbon gas and long distillate of light hydrocarbons. General requirement for procedure (methods) of measurements
GOST R 8.818-2013: State system for ensuring the uniformity of measurements. Virtual measuring instruments and virtual measuring systems. General principles
GOST R 8.903-2015: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements
GOST R 8.913-2016: State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST R 8.929-2016: State system for ensuring the uniformity of measurements. Measuring complexes for railway contact networkРІР‚в„ўs parameters measuring. Technical requirements
GOST R 8.929-2024: State system for ensuring uniformity of measurements. Complexes of mobile measuring-computing complexes for measurements of parameters of railway contact network. Technical requirements
IN 4-7-92: Index of regulatory and technical documents (as of 01.03.92)
MI 1314-86: State system for ensuring uniformity of measurements. The order of the metrological examination of technical tasks for the development of measuring instruments. Methodical instructions
MI 1317-2004: State system for ensuring uniformity of measurements. Results and characteristics of the measurement error. Forms of representation. Ways to use during testing of product samples and control over the parameters of product samples and control of their para
MI 1317-86: Guidelines. State system for ensuring uniformity of measurements. Results and characteristics of measurement error. Forms of representation. Methods of use when testing product samples and monitoring their parameters
MI 1570-86: State system for ensuring uniformity of measurements. Converters measuring current, voltage, power, frequency analog. Method of verification
MI 1698-87: Methodical instructions. Reliability assessment of data on the physical properties of polymeric materials
MI 1862-88: Guidelines. State system of measurement uniformity. Measuring channels of dispatching telecontrol systems of oil and gas production facilities. Typical methodology and program of metrological certification
MI 188-86: Guidelines. State system for ensuring uniformity of measurements. Means of measurement. Establishing the values of the parameters of calibration methods
MI 1967-89: Recommendation. State system for ensuring uniformity of measurements. The choice of methods and measuring instruments in the development of measurement techniques. General provisions
MI 2002-89: State system for ensuring uniformity of measurements. Information measuring systems. Organization and procedure for metrological certification
MI 2021-89: Recommendation. GSE. Metrological provision of flexible production systems. Main provisions
MI 2117-90: Recommendation. GSE. Organization of metrological support in the implementation of ISO 9000 standards
MI 2168-91: State system for ensuring uniformity of measurements. Measuring information systems. The method of calculating the metrological characteristics of the measuring channels according to the metrological characteristics of the linear analogs of the components
MI 2187-92: State system for ensuring uniformity of measurements. Methods for determining the calibration and intercalibration intervals of measuring instruments
MI 222-80: Calculation procedure for metrological characteristics of measuring channels of information and measurement systems based on metrological characteristics of their components
MI 2232-2000: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Estimation of the measuring error when the limited point of information
MI 2232-92: GSI. Ensuring the effectiveness of measurements in the management of technological processes. Estimation of measurement error with limited initial information
MI 2234-94: State system for ensuring uniformity of measurements. Requirements for testing in order to approve (confirm) the type of heat and coolant metering systems with digital computers
MI 2240-98: National Measurement Standards. Analysis of Measurement, Inspection, and Testing Practicies at Businesses, Organizations, and Associations. Work Execution Technique and Procedures
MI 2284-94: Recommendation. State system for ensuring uniformity of measurements. Documentation verification laboratories
MI 2439-97: National system for measurements unification. The measuring system metrological characteristics. Notation. The principles of regulation, definition and control.
MI 2440-97: The State Measurements System. Methods of experimental determination and control characteristics of the error of measurement channels for measuring systems and measurement systems.
MI 2441-97: Tests for the approval of the measuring systems types. General requirements. Guidelines
MI 2560-99: State system for ensuring uniformity of measurements. Measuring channels of programmable controllers. General requirements for metrological characteristics
MI 2646-2001: GSOEI. Description of the type of measuring instruments for the State Register. The order of construction and general requirements for the presentation and design
MI 2800-2003: State system of measuring uniformity provision. Capacity of technological pipelines. Methodics of measuring by geometric method
MI 2801-2003: Recommendation. State system for ensuring uniformity of measurements. Capacity of oil pipelines. The method of measurement using the geometric method
MI 2932-2005: State system for ensuring uniformity of measurements. Moisture solids and solids thermogravimetric. Standard metrological characteristics
MI 3020-2006: State system for ensuring uniformity of measurements. Tanks (tanks) steel horizontal cylindrical river bulk vessels (barges). Method of verification by the geometric method
MI 3021-2006: State system for ensuring uniformity of measurements. Natural gas consumption. Methods of measurement measurement systems with flow meters-meters RS-SPA-M
MI 3042-2007: State system for ensuring uniformity of measurements. Horizontal steel cylindrical tanks with elliptical and spherical bottoms for liquefied hydrocarbons with a capacity of 600 m3. Method of verification by the geometric method
MI 3056-2007: State system for ensuring uniformity of measurements. Tanks (tanks) steel vertical cylindrical with a rectangular insert (tankers and barges). Method of verification by the geometric method
MI 3290-2010: State system for ensuring uniformity of measurements. Recommendation on the preparation, execution and review of test materials of measuring instruments for type approval
MI 3592-17: Recommendation. State system for ensuring uniformity of measurements. Methods for determining the metrological characteristics of measuring instruments used in the field of atomic energy use
MI 675-84: State system for ensuring uniformity of measurements. Methods of conducting state control tests of measuring instruments
MP IS-24: Instruction System automated information and measuring "IS-24". Verification Method
MVI.MN 1792-2002: Method for performing measurements of the concentrations of elements in liquid samples using the ARL 3410+ spectrometer
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways
OT 1.1.8.02.1177-2016: Quality assurance program in the development and manufacture of products supplied to nuclear power plants. Content and Development Requirements
P SSFZhT 23-99: Industry application measurement tools used in federal railway transport. Requirements for the order of development, construction, content, design, and certification of programs and test methods
P SSFZhT 45/ISO 9001-2003: The certification system on the federal railway transport of the Russian Federation. Quality Management System. Requirements
PMG 122-2013: State system for ensuring the uniformity of measurements. The order of conducting of interstate register of measuring
PNST 161-2016: Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. Requirements for metrological providing and test methods
PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements
PNST 604-2022: Oil and gas industry. Subsea production systems. Use of subsea raw gas flow meters in distribution measurement systems
PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport
PR 50.2.019-96: Quantity of natural gas procedure for carrying out measurements using turbine and rotary meters
R 32.160-2000: Metrology recommendations. Selection of methods, tools and algorithms for estimating measurement errors during the certification of industry-specific measurement methods
R 391-80: Guidelines for the metrological assurance of the construction of underwater crossings of main pipelines
R 50.2.068-2009: State system for ensuring the uniformity of measurements. Measuring systems for crude oil and petroleum gas quantities. Norms of metrological characterictics
R 50-106-88: Recommended Practice. Procedure for Scientific and Technical Conformity Assessment of Standards and Technical Specifications
R 50-54-45-88: Recommendations. Calculations and tests of strength. Experimental methods for determining the stress-strain state of machine elements and structures. Method of full-scale tensometry of power equipment
R 50-54-80-88: Recommendations. Reliability in technology. Complex testing of engineering products for reliability. General provisions
R 52.08.665-2004: Pinwheel marine VMM. Straight pool testing method
R 52.08.702-2009: Hydrometer spinners. The method of calibration in the installation of a comparator for calibration of hydrometric turntables
RD 03-299-99: Requirements for acoustic emission equipment used to control hazardous production facilities
RD 153-34.0-11.117-2001: Information and measurement systems. Metrological support. General provisions.
RD 153-34.0-11.201-97: Method for the Determination of General Metrological Characteristics of Measurement Channels of Measurement Systems and Automated Process Control Systems According to Metrological Characteristics of Aggregate Means of Measurement
RD 153-34.0-11.402-98: Procedural Guidelines. Metrological Certification of Nonstandardized Means of Measurement. Organization and Execution Procedure
RD 153-34.1-35.127-2002: General technical requirements for program and technical complex for technological process automated control system of thermal power plant
RD 34.09.113-90: Procedural Guidelines for Assessment of Accuracy in Determination of Specific Nominal Consumption of Fuel per Electric Power Generated by Power Units with Power of 300 MW and Above
RD 34.11.113-95: Procedural Guidelines. Metrological Monitoring and Inspection by Main and Base Metrological Services at Electric Power Facilities
RD 34.11.207-89: Method for Calculating Metrological Characteristics of Telemetry Channels
RD 34.11.303-97: Procedural Guidelines. Development and Certification of Measurement Methods Used at Electric Power Facilities to Monitor Process Parameters not Subject to Government Metrological Inspection. Organization and Procedure
RD 34.11.332-97: Procedural Guidelines. Development and Certification of Measurement Methods Used at Electric Power Facilities in Areas Subject to Government Metrological Monitoring and Inspection. Organization and Procedure
RD 34.11.408-91: Model Program for Metrological Certification of Telemetry Channels of Operational Information Complex of Automated Dispatch Control System
RD 34.11.409-92: Standard Algorithms for Automated Processing of Experimental Data for Metrological Certification and Verification of Measurement Channels of Measurement Systems
RD 34.11.412-96: Methodical instructions. Calibration of measuring instruments at electric power enterprises. Organization and procedure
RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment
RD 45.008-97: The program and test methods are typical for the purpose of approving the type of time-based telephone connection metering equipment (APUS) of local telephone communications
RD 50-206-80: Guidelines. Rationing and determination of the metrological characteristics of the measuring transducers of the code into a constant voltage and current
RD 50-291-81: Guidelines. Analyzers of the composition and properties of petroleum products. Standard metrological characteristics
RD 50-332-82*: Methodical instructions. The order of scientific, technical and legal examination of draft standards
RD 50-363-82: D.C. measuring high-voltage dividers. Methods and means of verification
RD 50-452-84: Guidelines. Requirements for complexes of metrological characteristics of measuring instruments regulated in international regulatory and technical documents
RD 50-453-84: Procedural Guidelines for Error Characteristics of Measuring Devices Under Actual Operating Conditions. Calculation Methods
RD 50-696-90: Methodological instructions. GOST examination procedure.
RD 52.08.12-97: Guidelines. Hydrometer river curlers type GR-21M, GR-55, GR-99. Method of calibration in a rectilinear calibration pool
RD 52.08.15-97: Guidelines. Hydrometer river curlers type GR-21M, GR-55, GR-99, ISP-1 and VG-1-120/70 of the kit IST-1-0, 06/120/70. Work standards. Methods of metrological certification in a rectilinear calibration pool. State Hydrological Institute (GGI)
RD 52.08.44-2004: Guidelines. Current meter GR-42. Method of calibration in a straight pool. State Hydrological Institute (GGI)
RD 52.08.606-99: Guidelines. Hydrometer pinwheels type GR-21M, Gr-55, GR-99. The method of testing in the calibration trays GR-19 and GR-19M. State Hydrological Institute (GGI)
RD 52.08.758-2011: Hydrostatic Level Meter DST-22. Method of verification
RD 52.08.814-2014: PS-LIGHT-II bubbling level gauges from automated hydrological complexes. Method of verification
RD 52.08.864-2017: Level gauges. Calibration technique in operating conditions without dismantling equipment
RD 52.08.864-2017: Level gauges. Calibration technique in operating conditions without dismantling equipment
RD 52.18.761-2012: Means of measurements of hydrometeorological purposes network. NGO "Typhoon"
RD EO 0515-2004: Standards of measurement accuracy of the main heat-engineering quantities for nuclear power plants with water-cooled power reactors VVER-1000
RMG 129-2013: State system for ensuring the uniformity of measurements. Requirements to the specialists in the sphere of ensuring of measurements uniformity, working in the field of legal metrology (experts-metrologists)
RMG 52-2002: State system for ensuring the uniformity of measurements. General methological recommendations for the implementation of GOST 8.315-97 principles in the development and use of reference materials
RMG 62-2003: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Estimation of the measuring error when the limited point of information
RMG 74-2004: State system for ensuring the uniformity of measurements. Methods for determining the intervals of verification and calibration of measuring instruments
RMG 91-2009: State system for ensuring the uniformity of measurements. Joint use of concepts 'error of measurement' and 'uncertainty of measurement'. General principles
RMG 91-2019: State system for ensuring the uniformity of measurements. Use of the concepts “measurement error” and “measurement uncertainty”. General principles
RTM 68-8.10-95: Measurement procedure. Requirements for the construction, content, representation and metrological certification
RTM 68-8.24-01: Standardized metrological characteristics of measuring means of topographic-geodesic designation
SanPiN 2.1.2.1002-00: Sanitation and Disease Control Requirements for Residential Occupancies and Spaces
SO 153-34.11.325-90: Procedural Guidelines for the Determination of Error in Measurement of Active Electric Power During Generation and Distribution
SO 34.30.740: Guidance on the thermal tests of steam turbines
SO 34.35.146-2003: Guidelines for the creation of automated process control systems for water treatment plants (TLU) power plants
SP 233.1326000.2015: Rail transport infrastructure. High-precision coordinate system
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
