imgalt

SP 40-102-2000

СП 40-102-2000

Design and installation of pipeline systems of water supply and sewerage made of polymeric materials. General requirements. To replace SN 478-80

Проектирование и монтаж трубопроводов систем водоснабжения и канализации из полимерных материалов. Общие требования. Взамен СН 478-80

Status: Effective

The set of rules applies to the design and installation of new and reconstructed systems of internal and external water supply and sewerage networks of pipes and fittings made of polymeric materials.

Свод правил распространяется на проектирование и монтаж строящихся и реконструируемых систем внутренних и наружных сетей водоснабжения и канализации из труб и соединительных деталей из полимерных материалов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of Russia, 8/16/2000

SKU: RUSS19792

Price: $662.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 4. Normative documents for engineering equipment of buildings and structures and external networks » к.40 Water supply and sewerage »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » welding equipment »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Assembly devices »

Welding regulations » Main materials » Polymers »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.7 For construction and housing and communal services »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 2 Protection and protection of surface water bodies » 2.4 Requirements for protection of surface water bodies in implementation of activities » 2.4.2 Protection of water bodies in design, construction, reconstruction and operation of water management system »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.60 Water supply systems »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.80 Drainage Systems »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.025 Outdoor plumbing systems »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.030 External sewer systems »


As a Replacement Of:

SN 478-80: Guidelines for the Design and Installation of Water Supply and Sewer Systems Made of Plastic Pipes

The Document References:

GOST 18599-83: Polyethylene pressure pipes

SN 478-80: Guidelines for the Design and Installation of Water Supply and Sewer Systems Made of Plastic Pipes

SNiP 2.04.03-85: Sewage. External systems and structures

SNiP 3.01.04-87: Project acceptance for operation after construction

SNiP 3.05.01-85: Indoor plumbing systems

The Document is Referenced By:

GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications

GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications

GOST R 70406-2022: Outdoor engineering networks. Installation and testing of external hot pipelines made of flexible nonmetallic pipes. Rules and control of work performance

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)

ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures

ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials

ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials

ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes

OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

SP 10.13130.2020: Fire protection systems. Internal fire-fighting water supply. Norms and rules of design

SP 120.13330.2012: Subway systems

SP 253.1325800.2016: High-rise buildings utilities

SP 30.13330.2016: Domestic water supply and drainage systems in buildings

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 31-106-2002: Design and construction of engineering systems of single-family residential houses

SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants

SP 32.13330.2018: Sewerage. Outdoor networks and facilities

SP 32-105-2004: Subways

SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling

SP 368.1325800.2017: Residential buildings. Rules of design major repair

SP 394.1325800.2018: Buildings and complexes are high-rise. Terms of Use

SP 40-104-2001: Design and installation of underground pipelines of water supply with fibreglass pipes. Amendments, published in the BST 2002, №1 № 4, № 5, 2005.

SP 40-105-2001: Design and installation of underground sewage pipelines made of fibreglass pipes

SP 40-107-2003: Design, installation and operation of internal sewerage of polypropylene pipes. Amended, published in BST №1, 2004.

SP 41-107-2004: Design and installation of underground hot water networks made of pipes PE-C (XLPE) with thermal insulation made of polyurethane foam in polyethylene sheath

SP 41-109-2005: Design and installation of domestic water and heating systems in buildings using tubes of "cross-linked" polyethylene

SP 485.1311500.2020: Fire protection systems. Automatic fire extinguishing installations. Norms and rules of design

SP 73.13330.2012: Internal sanitary-technical systems

SP 73.13330.2016: Internal sanitary-technical systems

TR 101-07: Technical recommendations for the design and construction of non-pressure underground pipelines for domestic and rainwater sewage from polyethylene pipes with a two-layer profiled wall "Korsis"

TR 102-08: Technical recommendations for the design and construction of underground pipeline systems for non-pressure utility sewage and rainwater drains using polyethylene wells

TR 125-02: Guide to Good Practice for Design and Installation of Domestic Water Supply, Heat Supply, and Cooling Systems Made of Combined Polypropylene Pipes

TR 130-02: Technical recommendations on the design and ductless laying of hot water pipelines from PE-X pipes insulated with polyurethane foam in Proflex corrugated polyethylene sheath

TR 139-03: Technical recommendations for the design and installation of internal water supply systems for buildings using pipes made of cross-linked polyethylene (PE-X)

TR 150-03: Technical recommendations for the design, manufacture and installation of mine packages with the use of polypropylene pipes in the overhaul of internal water systems and sanitation of buildings

TR 160-04: Technical Recommendations for the design and channelless installation of intra-block pipelines for hot water supply and heat supply from glass-basalt-plastic pipes and products

TR 169-05: Technical recommendations for the design and installation of communication channels of polyethylene pipes with a two-layer wall

TR 170-05: Technical recommendations for the design and construction of underground drainage networks of non-pressure polyethylene pipes with a double-layer wall

TR 78-98: Technical recommendations for the design and installation of internal plumbing of buildings from metal-polymer pipes

TSN 31-332-2006: Residential and public high-rise buildings

TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!