SNiP 2.03.01-84
СНиП 2.03.01-84
|
|
Concrete and reinforced concrete structures
Бетонные и железобетонные конструкции
Status: Not effective - Superseded. See SNiP 2.03.01.84 *, which is a reprint of SNiP 2.03.01-84 as amended by resolutions of the USSR Gosstroy of July 8, 1988 No. 132 and dated August 25, 1988 No. 169.
Standards apply to the design of concrete and reinforced concrete structures of buildings and structures for various purposes, operating with a systematic exposure to temperatures not higher than 50 degrees Celsius and not less than minus 70 degrees Celsius. The standards set requirements for the design of concrete and reinforced concrete structures made from heavy, fine-grained, lightweight, cellular and porous concrete, as well as from straining concrete. The requirements of these standards do not apply to concrete and reinforced concrete structures of hydraulic structures, bridges, transport tunnels, pipes under embankments, road and airfield pavements, cement structures, as well as structures made from concrete with an average density of less than 500 and more than 2500 kg
Нормы распространяются на проектирование бетонных и железобетонных конструкций зданий и сооружений различного назначения, работающих при систематическом воздействии температур не выше 50 градусов Цельсия и не ниже минус 70 градусов Цельсия. Нормы устанавливают требования к проектированию бетонных и железобетонных конструкций, изготовляемых из тяжелого, мелкозернистого, легкого, ячеистого и поризованного бетонов, а также из напрягающего бетона. Требования настоящих норм не распространяются на бетонные и железобетонные конструкции гидротехнических сооружений, мостов, транспортных тоннелей, труб под насыпями, покрытий автомобильных дорог и аэродромов, армоцементные конструкции, а также конструкции, изготовляемые из бетонов средней плотностью менее 500 и свыше 2500 кг/м3, бетонополимеров и полимербетонов, бетонов на известковых, шлаковых и смешанных вяжущих (кроме применения их в ячеистом бетоне), на гипсовом и специальных вяжущих, бетонов на специальных и органических заполнителях, бетона крупнопористой структуры.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
8/20/1984
SKU: RUSS19808
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
As a Replacement Of:
SN 511-78: Design Guidelines for Self-Tensioned Concrete Structures
SNiP II-21-75: Concrete and reinforced concrete structures
The Document References:
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13840-68: Reinforced steel wire ropes 1x7
GOST 18105-86: Concretes. Rules for the strength control
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications
SN 511-78: Design Guidelines for Self-Tensioned Concrete Structures
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.03.11-85: Corrosion protection of buildings structures
The Document is Referenced By:
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 13579-78: Concrete blocks for walls of basements. Specifications
GOST 13580-85: Reinforced concrete slabs for strip foundations. Specifications
GOST 19010-82: Concrete and reinforced concrete blocks for walls of buildings. General specifications
GOST 21506-87: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21924.0-84: Reinforced-Concrete Slabs for Urban Road Pavements. Specifications
GOST 21924.1-84: Pre-stressed reinforced-concrete slabs for urban motorway pavements. Design and dimensions
GOST 21924.2-84: Reinforced concrete slabs of unstressed fittings for pavements of city roads. Structure and dimensions
GOST 24476-80: Precast reinforced concrete foundations for columns of the framework of different kinds of application for skeletal multi-storey buildings. Specifications
GOST 24893.0-81: Reinforced concrete frame brace for industrial buildings. Specifications
GOST 28456-90: Expansive dowels for building. General specifications
ODM 218.3.030-2013: Method for calculating reinforced cement concrete pavements of roads and airfields on fortified bases
SA 03-004-07: Calculation of the strength of vessels and apparatus
Series 1.030.1-1/88: Issue 0-4s. Materials for the design of walls of multi-storey buildings for construction in areas with seismicity of 7, 8 and 9 points
SNiP 2.02.03-85: Pile foundations
SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing
SP 121.13330.2011: AERODROMES
VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards
VSN 197-91: Design Guidelines for Rigid Road Pavements
VSN 286-90: Guidelines for the calculation of reinforced concrete chimneys
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
