GOST 10180-90
ГОСТ 10180-90
|
|
Concretes. Methods for strength determination using reference specimens
Бетоны. Методы определения прочности по контрольным образцам
Status: Not effective - Superseded. IUS 9-2013
The standard applies to all types of concrete according to GOST 25192, used in all areas of construction. The standard does not apply to special types of concrete for which other standardized methods for determining strength are provided.
Стандарт распространяется на бетоны всех видов по ГОСТ 25192, применяемые во всех областях строительства. Стандарт не распространяется на специальные виды бетонов, для которых предусмотрены другие стандартизированные методы определения прочности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/29/1989
SKU: RUSS19860
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh19 Test methods. Packaging. Marking »
The Document is Replaced With:
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
The Document References:
GOST 10181.0-81: Concrete mixtures. General requirement to test methods
GOST 10181-2000: Concrete Mixtures Test method
GOST 10905-86: Surface plates and face-plates. Specifications
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 166-89: Vernier callipers. Specifications
GOST 18105-86: Concretes. Rules for the strength control
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-68: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24104-88: General purpose and reference laboratory balances
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 29329-92: Balance for static weightings
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 6659-83: Water-resistant upholstery cardboard
GOST 7950-77: Cardboard for bookbinding
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements
GOST 9542-89: Shoe board and footwear components made of the same
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
The Document is Referenced By:
FTS ZhT TsP 071-2001: Pre-stressed reinforced concrete bars for switches. Certification requirements
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance
GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10181.3-81: Concrete mixture. Test method of determination of porosity
GOST 10181.4-81: Concrete mixtures. Test methods of determination of segregatability
GOST 10181-2000: Concrete Mixtures Test method
GOST 10629-88: Prestressed reinforced concrete sleepers for 1520 mm gauge railways. Specifications
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 12586.0-83: Reinforced-concrete vibrohydropressed pressure pipes
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 12852.0-77: Cellular concrete. General requirements to test
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13087-81: Concretes. Method of abrasion test
GOST 13578-68: Lightweight concrete panels on porous aggregates for external walls of industrial buildings. Technical requirements
GOST 13579-78: Concrete blocks for walls of basements. Specifications
GOST 13580-85: Reinforced concrete slabs for strip foundations. Specifications
GOST 16349-85: Cyclic mixers for building materials
GOST 17079-88: Reinforced concrete blocks for ventilation. Specifications
GOST 17538-82: Reinforced concrete constructions and products for lift shafts of residential buildings. Specifications
GOST 17608-91: Footway concrete slabs. Specifications
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 18048-80: Reinforced concrete sanitary cabins. Specifications
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 18105-86: Concretes. Rules for the strength control
GOST 18979-90: Reinforced concrete columns for multi-storey buildings. Specifications
GOST 18980-90: Reinforced concrete collar beams for multi-storey buildings. Specifications
GOST 19222-84: Arbolit and its products. General specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19330-91: Centrifugal reinforced concrete posts for railway line equipment. Specifications
GOST 19330-99: Centrifugal reinforced concrete posts for railway overhead line equipment. Specifications
GOST 19804.7-83: Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions
GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications
GOST 19804-91: Reinforced concrete piles. Specifications
GOST 20213-89: Reinforced concrete roof trusses. Specifications
GOST 20372-90: Reinforced concrete rafter and longitudinal beams. Specifications
GOST 20910-90: Refractory concretes. Specifications
GOST 21506-87: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21520-89: Small-sized wall blocks of cellular concrete. Specifications
GOST 21924.0-84: Reinforced-Concrete Slabs for Urban Road Pavements. Specifications
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22783-77: Concretes. Method of accelerated determination of compressive strength
GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 24099-80: Decorative facing slabs of crushed natural stone. Specifications
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 24476-80: Precast reinforced concrete foundations for columns of the framework of different kinds of application for skeletal multi-storey buildings. Specifications
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 24545-81: Concretes. Methods of fatigue tests
GOST 24547-81: Reinforced concrete culvert sections under highway and railway embankments. Specifications
GOST 24694-81: Reinforced concrete T-joint of flumed irrigation systems. Specifications
GOST 25214-82: Dense silicate concrete. Technical requirements
GOST 25485-89: Cellular concretes. Specifications
GOST 25628-90: Reinforced concrete columns for single-storey industrial buildings. Specifications
GOST 25697-83: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 25912.0-91: Reinforced concrete slabs for aerodrome pavement
GOST 26134-84: Concretes. Ultrasonic method of frost resistance determination
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 26815-86: Constructions of support walls reinforced concrete. Specification
GOST 26919-86: Reinforced concrete window boards for residential, civil and auxiliary buildings. Specification
GOST 26992-86: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27108-86: Reinforced concrete framework structures for multi-storeyed industrial buildings with floors without beams. Specifications
GOST 27215-87: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications
GOST 28042-89: Reinforced concrete roofing for enterprises buildings. Specifications
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 28737-90: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 29167-91: Concrete. The determination methods of fracture toughness characteristics
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 30459-96: Concrete additives
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31358-2007: Dry building flooring cement binder mixes. Specifications
GOST 31359-2007: Cellular autoclave curing concretes. Specifications
GOST 31360-2007: Wall unreinforced products of cellular autoclave curing concrete. Specifications
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements
GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods
GOST 5742-76: Cellular concrete thermoinsulating boards
GOST 5802-86: Mortars. Test methods.
GOST 6482-88: Reinforced concrete non-pressure pipes
GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications
GOST 6785-80: Reinforced concrete window boards. Specifications
GOST 6786-80: Reinforced concrete parapet slabs for production buildings. Specifications
GOST 6927-74: Slabs of concrete for wall facing. Technical requirements
GOST 7473-2010: Fresh concrete. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8020-90: Concrete and reinforced concrete structures for sewage, water and gas supply pipeline manholes. Technical specifications.
GOST 8717.0-84: Reinforced concrete and concrete steps. Specifications
GOST 948-84: Reinforced concrete lintels for brick wall buildings. Specifications
GOST 9561-91: Reinforced concrete multihollow panels for floors in buildings. Specifications
GOST 9574-90: Gypsum concrete panels for partitions. Specifications
GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods
GOST 9758-86: Non-organic porous aggregates for construction work
GOST 9818-85: Reinforced concrete flights of steps and stair landings. Specification
GOST ISO 18650-2-2016: Building construction machinery and equipment. Concrete mixers. Part 2. Method for testing the effectiveness of mixing
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications
GOST R 51263-99: Concrete with polysterene aggregates. Specifications
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST R 53231-2008: Concretes. Rules for control and assessment of strength
GOST R 53627-2009: Fine-layered polymer coating for roadway of bridges. Specifications
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 54747-2011: Ferro-concrete cross ties for railways for 1520 mm gauge railways. General specifications
GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications
GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual AV-22-r: Guidelines for technical diagnostics of road tunnels
Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities
Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")
Manual for SNiP 3.09.01-85: Manual for heliothermal processing of concrete and reinforced concrete products using SVITAP coatings
Manual for SNiP 3.09.01-85: Manual for heliothermal treatment of concrete and reinforced concrete products using film-forming compounds
Manual for SNiP 3.09.01-85: Manual on the use of chemical additives in the production of precast concrete structures and products
Manual for SNiP 3.09.01-85: Manual for the heat treatment of precast concrete structures and products
Manual for SNiP 3.09.01-85: The technology of manufacturing reinforced concrete pressure pipes with a steel core
Manual for SNiP 3.09.01-85: Manual for the heat treatment of reinforced concrete products with natural gas combustion products
Manual for SNiP 3.09.01-85: Production of prefabricated self-reinforced concrete structures and products
Manual for SNiP 3.09.01-85: Reinforced concrete molding technology manual
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work
MDS 12-52.2009: In situ pile construction
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps
MDS 12-7.2000: Guidelines On Procedure for State Supervision for Compliance with Construction Standards and Codes during Construction and Installation Activities at Industrial Facilities
MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide
MI 2486-98: Recommended Practice. National Measurement Standards. Shrinkage of Cement Materials. Methods for Measurement and Prediction Using KD-07 Shrinkage Meter
MI 2487-98: Recommended Practice. National Measurement Standards. Method for Accelerated Determination of Activity of Cement From its Shrinkage
MI 2488-98: Recommended Practice. National Measurement Standards. Method for Accelerated Determination of Water-to-Cement Ratio and Prediction and Monitoring Strength of Cement From its Shrinkage
MI 2489-98: Recommended Practice. National Measurement Standards. Cement Materials. Method for Accelerated Determination of Freeze-Thaw Resistance of Concrete (Grout) According to Structural Mechanical Characteristics
MI 2625-2000: Recommended Practice. National Measurement Standards. Cement Materials. Accelerated Method for Measuring Water Impermeability
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
NB ZhT TsP 017-99: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Safety standards Republished with changes
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.023-2012: Recommendations for the use of fast-hardening materials for the repair of cement concrete pavements
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads
ODM 218.3.008-2011: Recommendations for monitoring and inspection of retaining walls and retaining structures on landslide roads
ODM 218.3.012-2011: Cements for concrete coatings and road foundations
ODM 218.3.015-2011: Guidelines for the construction of cement concrete pavements in sliding forms
ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads
ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei
ODM 218.5.006-2008: Guidelines for the use of environmentally friendly anti-icing materials and technologies in the maintenance of bridge structures
OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications
OST 35-26.0-86: Ceramsite concrete room units for transport construction. General technical requirements.
OST 35-27.0-85: Reinforced concrete links of round and rectangular culverts under the railways and roads. Design and dimensions.
OST 66-14-86: Ferroconcrete complex plates. Specification.
P 69-97/VNIIG: Guidance on methods for assessing the life and safety of concrete and reinforced concrete structures of hydraulic structures
P 76-2000: Handbook for the design of concrete compositions for wear-resistant facings of hydraulic structures
R 18-76/NIIZhB: Recommendations for determining the flatness and non-perpendicularity of the faces of control samples of concrete
R 254-76: Guide to Statistical Control and Regulation of Construction Quality in Concrete Works
R 350-79: Guidelines for concreting foundations and communications of objects of the oil and gas industry in permafrost conditions, taking into account the hardening of concrete at negative temperatures
R 392-80: Recommendations on the composition and technology of the preparation of very heavy concrete for pipeline weights
R 589-86: Recommendations for ballasting of pipelines at underwater crossings
R II-76: Recommendations for determining the filtration coefficient of concrete at high hydrostatic pressures
RB-005-98: Requirements to Certification of Building Structures Important for Safety of Nuclear Facilities
RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities
RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities
RD 12.18.076-88: Guidelines for the technology of preparation of concrete with chemical additives
RD 153-34.0-21.529-98: Method for Inspection of Reinforced Concrete Tanks for Liquid Fuel Storage
RD 153-34.1-21.324-98: Method for Inspection of Wall Enclosures of Buildings and Structures at Thermal Power Stations
RD 153-34.1-21.326-2001: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 1: Reinforced Concrete and Concrete Structures
RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 31.31.38-86: Instructions for strengthening and reconstruction of mooring facilities.
RD 34.21.622-96: Procedural Guidelines for Inspection of Roof Structures of Main Buildings of Thermal Power Stations
RD 34.22.402-94: Typical instructions for the acceptance and operation of tower towers
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RSN 90-85 Gosstroj LitSSR: Instructions for the installation of monolithic floors of livestock buildings of sawdust-cement latex
RSN I-89: Recommendations for the use of concretes with complex antifrosty additives for monolithic structures erected in the Yakut ASSR at negative temperatures
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 36.44.12.2-90: Design and Installation of Foundations Using Pile Driven by Pushing
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities
SN 156-79: Instructions on the technology of preparation of heat-resistant concrete
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 525-80: Process Guidelines for Making Polymer Concretes and Polymer Concrete Products
SN 529-80: Process Guidelines for Production of Structures and Products of Dense Silicate Concrete
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.06.04-91: Bridges and pipes
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SO 34.21.343-2005: Rules for assessing the physicomechanical characteristics of concrete in hydraulic structures in use
SP 120.13330.2012: Subway systems
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 32-105-2004: Subways
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
SP 45.13330.2012: Earth structures, bases and foundations
SP 46.13330.2012: Bridges and pipes
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 78.13330.2012: Automobile roads
ST RK 1409-2005: Reinforced concrete road signs supports. Specification
ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification
STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions
STB 1538-2013: Technical means of traffic management. Bumps. General specifications
STB 2158-2011: Construction. Device bridges and pipes. The nomenclature of controlled quality indicators. Quality control of work
ST-NP SRO SSK-03-2013: Rules for monitoring and assessing the strength of concrete in monolithic structures
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
TR 100-99: Recommended Practice for Construction of Auger Pile Foundations within the Area of Existing Development
TR 120-01: Technical recommendations on the waterproofing of the underground part of buildings and structures using materials "Akvatron-6u", "Akvatron-8b", "Akvatron-12"
TR 134-03: Technical recommendations for the installation and commissioning of pavements, taking into account the requirements of international standards for evenness
TR 138-03: Technical recommendations on the use of rolled low cement concrete in pavement structures
TR 141-03: Technical recommendations on the construction technology of collector tunnels without secondary lining
TR 165-05: Technical recommendations on the establishment of durability (service life) of building materials and products
TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 185-07: Technical recommendations on the use of waterproofing dry mixes penetrating action "Kristol" (KrysTool)
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TR 80-98: Recommended Practice for Concrete Laying Process by Unheated Method of Cast-in-Place Structures Using Thermos and Accelerated Thermos
TR 86-98: Guide to Good Practice for Use of Dispersed Reinforced Concrete Mixes for Construction of Cast-in-Place High-Reliability Urban Roadbeds and Pavements
TR 97-99: Guide to Good Practice for Comprehensive Site Improvements and Amenities for Residential Complexes
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TSN 50-306-2005: Foundations and foundations of increased bearing capacity. Rostov region
TU 102-161-77: Coatings weighting reinforced concrete monolithic main pipelines such as PZHU
TU 102-264-81: Weighted reinforced concrete modular ring. UTK type for main pipelines
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-421-86: Concrete wading weights type 1 UBKM
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-465-88: Rack reinforced concrete vibrated CB 90-3.2 for supports VL 6 - 10 kV
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 102-79: Concrete belt weighting compounds type UE for main pipelines
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 218 RSFSR 620-90: Hard concrete mixes for the construction of cement concrete pavements and foundations of roads and airfields
TU 34-12-11410-89: Racks of reinforced concrete CB95-1, CB95-1-a, CB95-2, CB95-2-a
TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab
TU 5745-001-42806964-97: Dry Non-Shrink Mixture Monofleks-A
TU 5831-001-54735376-2004: Specifications. Three-layer reinforced concrete panels with flexible fiberglass connections for exterior walls of Styrod system buildings
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions
TU 67-1003-88: Lattice arched beams prestressed with a span of 12 m
VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards
VSN 139-80: Construction Guidelines for Cement Concrete Road Pavements
VSN 146-68: Technical Guidelines for the Installation of Shield-Driven Cast-In-Place Concrete Lining
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 31-83: Execution Requirements for Concrete Work for Construction of Hydraulic Structures
VSN 46-96: Instruction on preparation and use of concrete with sodium nitrite additive in winter conditions
VSN 48-65: Technical Guidelines for the Installation of Seamless Concrete Lining in Railway Tunnels
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSN 61-97: Process Guidelines for Construction of Decorative Concrete Road Pavements
VSN 62-97: Process Guidelines for the Use of Adjustable Heads on Inspection Manholes During Rehabilitation and Repair of Urban Roads
VSN 7-94: Guidelines for the Application of Poured Concrete Mixtures in Road Construction
VSN 83-92: Technical instructions for the use of concrete and cement-sand mortars hardening in the frost, in the construction of artificial structures
VSN 85-68: Technical Guidelines for the Design and Erection of Span Structures of Road and Urban Street Bridges with Pavement Constructed of Reinforced Concrete Slabs Without Applied Waterproofing
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.