imgalt

GOST 2405-88

ГОСТ 2405-88

Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

Манометры, вакуумметры, мановакуумметры, напоромеры, тягомеры и тягонапоромеры

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to indicating and recording manometers, vacuum gauges, vacuum gauges, pressure gauges, pressure gauges and pressure gauges, designed to measure excess and vacuum pressure of liquid, gas and steam. The standard does not apply to devices: exemplary; differential pressure gauges; for measuring pulsating pressure.

Стандарт распространяется на показывающие и самопишущие манометры, вакуумметры, мановакуумметры, напоромеры, тягомеры и тягонапоромеры, предназначенные для измерения избыточного и вакуумметрического давления жидкости, газа и пара. Стандарт не распространяется на приборы: образцовые; манометры дифференциальные; для измерения пульсирующего давления.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 12/23/1988

SKU: RUSS19916

Price: $449.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.1 General requirements for testing, environments, equipment and measuring instruments »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.2 Instruments for measuring pressure, volume, flow, level, time and mechanical quantities »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.100 Measurement of force, weight and pressure »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.100 Measurement of force, weight and pressure »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P1 Instruments for measuring pressure, volume, flow, level, time and fur » P14 Instruments for measuring pressure, depression and level »

National Standards for OKSTU » GENERAL PURPOSE INSTRUMENTS AND AUTOMATION » Instruments for measuring and regulating pressure, differential pressure and vacuum »


As a Replacement Of:

GOST 12716-76: Pressure gauges, vacuum gauges and manometers that show the rail. Specification

GOST 12733-83: Gauge pressure gauges, vacuum gauges and manometers for ships. General specifications

GOST 2405-80: Pressure gauges, vacuum gauges and flow meters, indicating. General specifications

GOST 24844-81: Dials and scales of pressure gauges, vacuum gauges, manometers, pressure gauges, pull gauges, for display and recording. Technical requirements. Marking

GOST 2648-78: SSI. Traction meters, pressure gauges and tension gauges. General specifications

GOST 7919-80: Manometers, vacuum gauges and manometers. General specifications

GOST 8625-77: Pressure gauges, vacuum gauges and manometers, indicating. Basic parameters and dimensions

The Document References:

GOST 12.1.011-78: Explosive mixtures. Classification and test methods

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.021-76: The Explosion proof Electrical Apparatus. The Order of Checking of Technical Documentation, on the Part of its Compliance with the National Standards, the Test and Certification Procedures

GOST 12716-76: Pressure gauges, vacuum gauges and manometers that show the rail. Specification

GOST 12733-83: Gauge pressure gauges, vacuum gauges and manometers for ships. General specifications

GOST 12997-84: SSI Products. General specifications

GOST 13045-81: Rota meters

GOST 13717-84: Pressure-operated indicating electrical-contact instruments

GOST 14192-96: Cargo marking

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 2405-80: Pressure gauges, vacuum gauges and flow meters, indicating. General specifications

GOST 24844-81: Dials and scales of pressure gauges, vacuum gauges, manometers, pressure gauges, pull gauges, for display and recording. Technical requirements. Marking

GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements

GOST 2648-78: SSI. Traction meters, pressure gauges and tension gauges. General specifications

GOST 7826-93: Strip and circular charts of registers. General specifications

GOST 7919-80: Manometers, vacuum gauges and manometers. General specifications

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

GOST 8625-77: Pressure gauges, vacuum gauges and manometers, indicating. Basic parameters and dimensions

GOST 9988-84: Pneumatic regulator devices of SSI. General specifications

GOST R 51330.11-99: Explosion-proof electrical equipment. Part 12. Classification of mixtures of gases and vapors with air for safe experimental maximum gaps and minimum flammable currents

GOST R 51330.19-99: Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapors relating to the use of electrical apparatus

GOST R 51330.2-99: Explosion-proof electrical equipment. Part 1. Explosion protection of the

GOST R 51330.5-99: Explosion-proof electrical equipment. Part 4. Method for determining the self-ignition temperature

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

RD 50-690-89: Methodological instructions. Industrial product dependability. Methods for estimating dependability based on experimental data.

The Document is Referenced By:

808-2017 PKB CV: Instructions for the maintenance of wagons in operation (Instructions for the inspector of wagons)

FR 1.31.2010.07605: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of acetic acid in industrial emissions into the atmosphere by the photometric method with ammonium vanadate

GOST 10037-83: Autoclaves for building industry

GOST 10362-2017: Pressure rubber hoses with thread reinforcement without end fittings. Technical conditions

GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications

GOST 10577-78: Petroleum products. Method for the determination of mechanical impurities

GOST 10579-2017: Injectors for diesels. Technical requirements and test methods

GOST 10579-88: Diesel engine injectors

GOST 10944-2019: Manual and locking taps for water heating systems of buildings. General specifications

GOST 10944-97: Manual control and stop valves for building water heating systems. General specifications

GOST 11101-2021: Fire-fighting equipment. Air-foam fire barrels. General technical requirements. Test methods

GOST 11802-88: Jet fuel method of test for determination of thermal-oxidative stability under static condition

GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 12.2.088-2017: Standards system of labour safety. Ground equipment for well repair and realization. General safety requirements

GOST 12.2.088-83: Standards system of labor safety. Ground equipment for well repair and realization. Safety general requirements

GOST 12.2.115-2002: Operation safety standard system. Blow-out preventers. Safety requirements

GOST 12.2.115-86: Occupational safety standards system. Blowout preventer equipment. Safety requirements

GOST 12.2.125-91: On-land cable equipment

GOST 12.2.132-93: Occupational safety standards system. Oil Extraction Wellhead Equipment. General Safety Requirements

GOST 12.2.231-2012: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods

GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST 12.2.233-2012: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements

GOST 12.4.005-85: Occupational safety standards system. Personal protective means for respiratory system. Method for determination of breathing resistance

GOST 12.4.166-2018: Occupational safety standards system. Respiratory protective devices. Facepiece. General specifications

GOST 12.4.166-85: Helmet face piece for commercial gas masks

GOST 12258-79: Soviet champagne. Sparkling and carbonation wine. Method for the determination of carbon dioxide pressure in bottles

GOST 12794-80: Methyl chloride technical. Specifications

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 1335-84: Rubber brake hoses with thread reinforcement for railroad and subway transport without couplings

GOST 13525.8-86: Fibre intermediate products, paper and board. Method for determination of resistance to bursting

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 14753-82: Indicating and recording pneumatic monitoring instruments of ssi

GOST 16483.34-77: Wood. Method of gas permeability determination

GOST 16920-93: Manometric thermometers and temperature transducers

GOST 17.2.4.07-90: Environment protection. Atmosphere. Methods of determination of pressure and temperature of gas-and-dust streams from stationary sources of pollution

GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement

GOST 17151-2019: Utensils made of sheet aluminum. General specifications

GOST 17151-81: Cooking utensils made

GOST 17237-93: Liquid perfumery products

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure

GOST 18124-2012: Chrysotile cement sheets are flat. Technical conditions

GOST 18140-84: SSI differential pressure gauges. General specifications.

GOST 18509-88: Tractor and combine diesel engines. Methods of bench tests

GOST 18698-79: Rubber delivery hoses with textile framework

GOST 1942-86: 1,2-Dichlorethane for industrial use. Specifications

GOST 19681-2016: Sanitary and technical water fittings. General specifications

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

GOST 19716-81: Automatic pneumatic rapier looms

GOST 19920.17-74: Stereo regular butadiene synthetic rubbers. Methods for determination of plasticity and stiffness

GOST 20073-81: General-purpose stationary air piston compressors. Acceptance rules and methods of tests

GOST 20242-74: Additives and oils containing additives. Method for determination of chlorine

GOST 20461-75: Gaseous helium. Method for determination of impurities volume fraction by emission spectral analysis

GOST 20548-87: Heating hot-water boilers with heating outputs

GOST 20888-81: Household electrical coffee makers specifications

GOST 21490-76: Motor oils. Method of test detergent properties by the installation 'УИM-6-НАТИ'

GOST 21744-83: Multilayer metal bellows. General specifications

GOST 22161-76: Marine machines, mechanisms, steam boilers, vessels, apparatus. Norms and rules of hydraulic and air testing

GOST 23.219-84: Products wear resistance assurance. Test method for wear resistance of materials and details with hydro erosion wearing by dispersed particles

GOST 23223-78: Filtering-absorbing protective mask canisters. Test method for tightness

GOST 23268.2-91: Drinking medicinal, medicinal-table and natural-table mineral waters. Methods for determination of carbon dioxide

GOST 23401-90: Metal powders. Catalysts and carriers. Determination of specific area

GOST 23695-94: Enamelled steel sanitary appliances. Specifications

GOST 23862.18-79: Neodymium, gadolinium and their oxides. Method of determination of rare-earth element oxides

GOST 23862.35-79: Rare-earth metals and their oxides. Methods of determination of sulphur, zinc, cerium and europium

GOST 23862.6-79: Rare-earth metals and their oxides. Methods of determination of sodium, potassium and calcium

GOST 23862.7-79: Rare-earth metals and their oxides. Chemical-spectral methods of determination of impurities in oxides of rare-earth elements

GOST 23862.8-79: Lanthanum, cerium, ytterbium, lutetium, yttrium and their oxides. Chemical-spectral method of determination of impurities in oxides of rare earth elements

GOST 23862.9-79: Neodymium, gadolinium, terbium, holmium, erbium, thulium and their oxides. Chemical-spectral method of determination of impurities in oxides of rare-earth elements

GOST 24160-2014: Peat. Methods for determination of water capacity and water absorption

GOST 24160-80: Turf. Methods for the determination of moisture-holding capacity

GOST 24282-97: Floor-mounted flexible electrified vehicles. Testing methods

GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications

GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating

GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications

GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold

GOST 24409-80: Ceramic electrotechnical materials. Methods of testing

GOST 24641-81: Cable sheaths of lead and aluminium

GOST 24983-81: Reinforced-concrete pressure pipes

GOST 25088-98: Ship's doors. Specifications

GOST 25148-82: Stationary dental units

GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 25309-94: Covers of access hatches. Specifications

GOST 25452-2017: High-pressure rubber hoses with metal windings without end fittings. Technical conditions

GOST 25452-90: Unarmored high-pressure rubber hoses with metal winding

GOST 25779-90: Toys. General safety requirements and control methods

GOST 2593-2009: Coupling air brake hoses for railway rolling stock. Specifications

GOST 2593-2014: Hose connections for railway rolling stock. Specifications.

GOST 2593-82: Coupling air brake hoses for railway rolling stock. Specifications

GOST 2624-2016: Copper and brass capillary tubes. Specification

GOST 2624-77: Copper and brass capillary tubes

GOST 26460-85: Air separation products. Gases. Cryogens. Packing, marking, transportation and storage

GOST 26548-85: Air heaters. Methods of tests

GOST 26585-2003: Giant and super giant pneumatic tyres for off-the-road trucks. Specifications

GOST 26589-94: Roofing and waterproof mastics. Methods of testing

GOST 26699-98: Underground drilling rigs. General specifications and test methods

GOST 26891-86: Aerosol valves, spray heads and caps

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 26931-86: Raw materials and food-stuffs. Method for determination of copper

GOST 26932-86: Raw materials and food-stuffs. Methods for determination of lead

GOST 26933-86: Raw materials and food-stuffs. Methods for determination of cadmium

GOST 26934-86: Raw materials and food-stuffs. Method for determination of zinc

GOST 27577-2000: Compressed natural fuel gas for internal-combustion engines. Specifications

GOST 27577-87: Compressed natural fuel gas for gas-driven vehicles

GOST 28066-89: Ssi liquid chamber meters

GOST 28137-89: Products in aerosol packing. Methods for determination of excess vapour pressure and sealing

GOST 28545-90: Milking machine installations. Construction and performance

GOST 28726.1-2017: Natural gas. Determination of mercury. Part 1. Sampling of mercury by chemisorption on iodine

GOST 28726.2-2018: Natural gas. Determination of mercury. Part 2. Sampling of mercury by amalgamation of gold/platinum alloy

GOST 28781-90: Petroleum and petroleum products. Method for determination of saturated vapours pressure by mechanical dispersing

GOST 29065-91: Tanks for milk

GOST 3022-80: Technical hydrogen. Specification

GOST 30340-2012: Corrugated chrysotile cement sheets. Specifications

GOST 30466-98: Household kitchen appliances with external warmth supply. Safety requirements and test methods

GOST 30573-98: Foundry equipment. Installations for casting of aluminum alloys. General specifications

GOST 30628-98: Plough installations. Test methods

GOST 30647-99: Casting equipment. Casting machines under low pressure. General specifications.

GOST 30731-2016: Cylinders, tubes and hoses for hydraulic brake and vehicle clutch. General technical requirements, acceptance rules and control methods

GOST 30747-2001: Agricultural tractors. Measurement of characteristics tested through the power take-off shaft

GOST 30749-2001: Agricultural tractors. Measurement of the driving axles power

GOST 30829-2002: Transportable acetylene generators. General specifications

GOST 31209-2003: Containers for blood and its components. Requirements for chemical and biological safety and methods of testing

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31344-2007: Machines and equipment for removing the manure. Test methods

GOST 31371.7-2020: Natural gas. Determination of the composition by gas chromatography with an uncertainty estimate. Part 7. Procedure for measuring the molar fraction of components

GOST 31374-2009: Connection brake pipe with electrocontact 369A. Specifications

GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications

GOST 31402-2013: Brake cylinders for railway rolling stock. General specifications

GOST 31561-2012: Longwall powered roof chocks. Basic parameters. General technical requirements. Test methods

GOST 31562-2012: Рneumatic rock drills. General technical requirements

GOST 31563-2012: Pneumatic hammer drills. Technical requirements and testing methods

GOST 31564-2012: Pneumatic stopper drills. General technical requirements

GOST 31620-2012: Surgical sutures. General technical requirements. Test method

GOST 31628-2012: Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic mass concentration determination

GOST 31660-2012: Foods. Anodic stripping voltammetric method of iodine mass concentration determination

GOST 31677-2012: Aerosol packaged perfumery and cosmetics products. General specifications

GOST 31678-2012: Liquid perfumes products. General specifications

GOST 31832-2012: Well sucker rod pump drives. General technical requirements

GOST 31866-2012: Drinking water. Determination of elements content by stripping voltammetric method

GOST 31943-2012: Telephone cables with polyethylene insulation and plastic sheath. Specifications

GOST 31971-2013: Automobile engines. Timing chain tensioners. Technical requirements and test methods

GOST 31995-2012: Polyethylene insulated and plastic sheathed block-signalling cables. Specifications

GOST 32037-2013: Non-alcoholic and low-alcoholic beverages, kvases. Method for determination of carbon dioxide

GOST 32038-2012: Beer. Method for determination of carbon dioxide

GOST 32309-2013: Casting utensils of aluminium alloys. General specification

GOST 32842-2014: Automobile roads of general use. Bituminous mastics. Test methods

GOST 32845-2014: Automobile roads of general use. Bituminous sealants. Test methods

GOST 32938-2014: Cosmetics. Inversion-voltammetry method for determination of arsenic

GOST 33007-2014: Scrubber and duster equipment. Methods for determination of dust load of gas streams. General technical requirements and control methods

GOST 3302-95: Rubber ice-bags. Specification

GOST 3303-94: Rabber hot-water bottles. Specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing

GOST 33223-2015: Braking systems of rolling stock. Device of automatic control of pressure in pneumatic power authority. Safety requirements and inspection methods

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33597-2015: Braking systems of railway rolling stock. Inspection procedures

GOST 33681-2015: Food products. Determination of antibiotics by stripping voltammetry method (chloramphenicol, tetracycline)

GOST 33691-2015: Test of agricultural machinery. Method for determining the angle of transverse static stability

GOST 33748-2016: Aluminium cans of deep drawing with easy open end. General specifications

GOST 33748-2023: Deep-drawn aluminum cans with easy-open lids. Specifications

GOST 33885-2016: Passenger cars on locomotive traction. Test methods of sanitary-hygienic and ecological indicators

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST 34059-2017: Internal buildings and structures utilities. Arrangement of heating, heating and cooling water supply systems. General technical requirements

GOST 34060-2017: Internal buildings and structures utilities. Testing and adjusting the ventilation systems and air-conditioning. Rules of carrying out and control of performance of works

GOST 34068-2017: Gas supply system. Natural gas production. Field pipelines. Mechanical safety. Pressure and leak tests

GOST 34297-2017: Cumulative pipe cutters. Specifications

GOST 34350-2017: Fire-fighting techniques. Fire extinguishing trucks. General technical requirements. Test methods

GOST 34429-2018: Liquefied hydrocarbon gases. Method for determination of saturated vapour pressure

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST 34648-2020: Fiber-reinforced thermosetting plastics pipes and pipeline parts. Methods for determining the resistance of pipes and fittings to short-term effects of internal hydraulic pressure

GOST 3484.4-88: Power transformers. Tank tests for strength

GOST 34891.2-2022: Refrigeration and heat pump systems. Safety and environmental requirements. Part 2. Design, construction, testing, labelling and documentation

GOST 3564-84: Multioutlet oil-lubricating plants. Specifications

GOST 4640-93: Mineral wool. Specifications

GOST 473.9-81: Chemically resistant and heat resistant ceramic ware. The method of testing by hydraulic pressure

GOST 4754-97: Pneumatic tyres for passenger cars, trailers for them, light-duty trucks and buses of especially small capacity. Specifications

GOST 4835-2006: Car wheelsets of 1520 mm gauge mainline railways. Specifications

GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications

GOST 4835-80: Car wheelsets of railways mainline, gauge 1520 (1524) mm. Specifications

GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications

GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications

GOST 5513-97: Pneumatic tiers for trucks, trailers fot them, buses and rtolleybuses

GOST 6221-90: Industrial liquid ammonia

GOST 6286-2017: High pressure rubber hoses with metal braids without end fittings. Technical conditions

GOST 6286-73: High-pressure rubber hoses with metal braids without fittings

GOST 6851-2003: Lead-acid storage starter and non-starter batteries for motor-cycles. General specifications

GOST 6851-91: Lead-acid storage non-starter batteries for motor cycles and motor-scooters. General specifications

GOST 6948-81: Foaming agent PО-1Specifications

GOST 7025-91: Ceramic and calcium silicate bricks and stones. Methods for water absorption and density determination and frost resistance control

GOST 7403-74: Crabs in natural juice

GOST 7463-2003: Pneumatic tyres for tractors and agricultural machinery. Specifications

GOST 8.122-99: State system for ensuring the uniformity of measurements. Rotameters. Methods of verification

GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods

GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods

GOST 8220-85: Underground fire hydrants. Specifications

GOST 8339-84: Oil pressure installations for hydraulic turbines

GOST 8430-2003: Pneumatic tyres for earthmoving, loading and mining machines. Specifications

GOST 8747-88: Asbestos-cement sheet products. Test methods

GOST 8756.18-2017: Canned food. Methods for determining the appearance, tightness of the package and the state of the inner surface of the package

GOST 8756.18-70: Canned food products. Methods for determination of appearance, tightness of package and inner surface condition of metallic package

GOST 8829-2018: Prefabricated reinforced concrete and concrete products. Load test methods. Rules for evaluating strength, stiffness and crack resistance

GOST 8829-85: Prefabricated reinforced concrete structures and elements. Methods of testing and estimation of strength, rigidity and resistance to cracking

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST 8894-2018: Glass pipes. Specifications

GOST 8894-86: Glass pipes and shaped parts thereto Technical requirements

GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST 9307-78: Organic dyes. Alcohol soluble nigrosine. Specifications

GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications

GOST 959-2002: Lead-acid storage starter batteries for motor-tractors. General specifications

GOST 959-91: 12 v starter lead storage batteries for vehicles, tractors and motorcycles

GOST 9827-75: Additives and additive containing oils. Method for determination of phosphorus

GOST 9923-2021: Fire fighting equipment. Hand fire barrels. General technical requirements. Test methods

GOST R 12.2.141-99: Occupational safety standards system. Surface drilling equipment. Safety requirements

GOST R 12.2.142-99: Occupational safety standards system. Refrigerating equipment of refrigerating capacity over 3,0 kW. Safety requirements

GOST R 50110-92: Polymeric membranes. Definition method of flat ultrafiltration membranes water flux

GOST R 50517-93: Polymer membranes. The method of determination of weight fraction of latex particles not permeated through microfiltration membranes

GOST R 50588-2012: Foaming agents for fire extinguishing. General technical requirements and test methods

GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods

GOST R 50601-93: Impeller counters for potable water. General specifications

GOST R 50629-93: Special form radioactive material. General technical requirements and test methods

GOST R 50650-94: Domestic siphons. Safety requirements and test methods

GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods

GOST R 50703-94: Heading machines having cutter heads mounted on booms. Test methods

GOST R 50820-95: Scrubber and duster equipment. Methods of determination of dust load of gas-and-dust streams

GOST R 50855-96: Containers for blood and its components. Requirements for chemical and biological safety and methods of testing

GOST R 50982-2003: Fire equipment. Specialized fire department tools. General technical requirements. Test methods

GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods

GOST R 50982-2019: Fire fighting equipment. Tool for special work in fires. General technical requirements. Test methods

GOST R 50982-96: Fire equipment. Specialized fire department tools. General requirements. Test methods

GOST R 50994-96: Liquefied petroleum gases. Determination of gauge vapour pressure. LPG method

GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51049-2008: Fire equipment. Pressure fire hoses. General technical requirements. Test methods

GOST R 51049-2019: Fire fighting equipment. Pressure head fire hoses. General technical requirements. Test methods

GOST R 51049-97: Fire engineering. Fire pressure hoses. General technical requirements. Test methods

GOST R 51057-2001: Fire fighting equipment. Portable fire extinguishers. General technical requirements. Test methods

GOST R 51103-97: Cinematography. Professional motion-picture equipment and apparatus. Safety requirement and control methods

GOST R 51162-98: Casting aluminium utensils. General specifications

GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods

GOST R 51301-99: Food-stuffs and food raw materials. Anodic stripping voltammetric methods of toxic traces elements determination (cadmium, lead, copper and zinc)

GOST R 51311-99: Telephone cables with polyethylene insulation and plastic sheath. Specifications

GOST R 51312-99: Polyethylene insulated and plastic sheathed block-signalling cables. Specifications

GOST R 51555-99: Toys. General safety requirements and methods of tests. Mechanical and physical properties

GOST R 51578-2000: Liquid perfumery products. General specifications

GOST R 51641-2000: Filtering granular materials. General specifications

GOST R 51669-2000: Pit hydraulic props. Test methods

GOST R 51673-2000: Gaseous pure hydrogen. Specifications

GOST R 51756-2001: Aluminium cans of deep drawing with easy open end. Specifications

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

GOST R 51827-2001: Packagings. Leakproofness and hydraulic pressure testing methods

GOST R 51962-2002: Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic concentration determination

GOST R 51979-2002: Aircraft lead batteries. General specifications

GOST R 52152-2003: Long wall powered roof chocks. Basic parameters. General technical requirements. Test methods

GOST R 52180-2003: Drinking water. Determination of elements content by stripping voltammetric method

GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods

GOST R 52315-2005: Non-alcoholic beverages. Mineral and drinking water. Stripping voltammetric method of selenium mass concentration determination

GOST R 52392-2005: Brake cylinders for railway rolling stock. General specifications

GOST R 52415-2005: Fresh cow's milk - raw material. Luminescent method of quantitative determination of the total amount of mesophilic aerobic and elective anaerobic microorganisms

GOST R 52442-2005: Pneumatic stopper drills. General technical requirements

GOST R 52443-2005: Pneumatic rock drills. General technical requirements

GOST R 52542-2006: Refractories. Methods for determination of thermal resistance with cooling by compressed air

GOST R 52587-2006: Abrasive tools. Designations and hardness test methods

GOST R 52639-2006: Open-circuit diving apparatus. General specifications

GOST R 52689-2006: Foods. Anodic stripping voltammetric method of iodine mass concentration determination

GOST R 52690-2006: Foods. Voltammetric method of vitamin C mass concentration determination

GOST R 52850-2007: Vehicles. Single-stage compressed air pumps. Technical requirements and test methods

GOST R 52899-2007: Pneumatic tyres for truck power-driven vehicles and trailers. Specifications

GOST R 52900-2007: Pneumatic tyres for passenger cars and trailers for them. Specifications

GOST R 53005-2008: Surgical suture materials. General technical requirements. Test methods

GOST R 53277-2009: Fire equipment. Equipment for maintenance of fire hoses. General technical requirements. Methods of testing

GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods

GOST R 53288-2009: Automatic water and foam extinguishers systems. Automatic fire water mist spray extinguishers systems. Modules. General technical requirements. Test methods

GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods

GOST R 53332-2019: Fire fighting equipment. Motor-pumps fire. Main parameters. General technical requirements. Test methods

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53427-2009: Aerosol packaged perfumery and cosmetic products. General specifications

GOST R 53498-2019: Medical products of a plaster type. General technical requirements. Test methods

GOST R 53559-2009: Vehicles. Forced ignitions engine fuel filters and filter elements. General technical requirements

GOST R 53648-2009: Underground diesel locomotives. General technical requirements and test methods

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 53762-2009: Natural combustible gases. Determination of hydrocarbon dew point temperature

GOST R 53763-2009: Natural combustible gases. Determination of water dew point temperature

GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods

GOST R 53832-2010: Vehicles. Heat exchangers and thermostats. Technical requirements and test methods

GOST R 53839-2010: Automobile engines. Liquid pumps of cooling systems. Technical requirements and test methods

GOST R 53906-2010: Toys. General safety requirements and methods of tests. Mechanical and physical properties

GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods

GOST R 54771-2011: Mine electric locomotive transport. Trolley electric locomotives. General technical requirements and test methods

GOST R 54772-2011: Supple mining main vents and shaped components for them. General technical requirements and test methods

GOST R 54774-2011: Underground monorail diesel powered transport. General technical requirements and test methods

GOST R 54776-2011: Occupational safety standards system. Equipment and facilities for prevention and localization explosions of dust-air mixtures in coal mines dangerous on gas and dust. General technical requirements. Safety requirements and test methods

GOST R 54791-2011: Gas welding equipment used in welding, cutting and allied processes. Pressure regulators and pressure regulators with flow-metering devices for manifold systems and gas cylinders up to 300 bar (30 МРа)

GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications

GOST R 55014-2012: Power transformers. Tests for mechanical strength of tanks

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods

GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods

GOST R 55160-2012: Mining equipment. Mine face conveyers jacks. General technical requirements and test methods

GOST R 55161-2012: Mining equipment. Borers mining hand pneumatic. Safety requirements and methods of testing

GOST R 55162-2012: Mining equipment. Pneumatic hammers. Safety requirements and test methods

GOST R 55163-2012: Mining equipment. Underground self-propelled cars. Safety requirements and test methods

GOST R 55164-2012: Mining equipment. Movable mine compressor stations. Safety requirements and test methods

GOST R 55728-2013: Mining equipment. Underground hydromonitors. Safety requirements and test methods

GOST R 55783-2013: High-explosive torpedoes. Technical conditions

GOST R 55784-2013: Cutters cumulative. Technical conditions

GOST R 55946-2014: Saving means of crews of engineering installations operated in water areas, personal. General specifications

GOST R 56292-2014: Block-signalling cables. General specification

GOST R 56393-2015: Passenger cars on locomotive traction. Test methods of sanitary-hygienic and ecological indicators

GOST R 56628-2015: Collective saving means of crews of engineering installations operated in water areas. General specifications

GOST R 56719-2015: Liquefied natural gas. Sampling

GOST R 56834-2015: Combustible natural gas. Determination of oxygen content

GOST R 56929-2016: Emissions of the polluting substances in the atmosphere. Research of fractional composition of dust by optical method at rationing quality of atmospheric air

GOST R 56961-2016: Saving means of crews of engineering installations operated in water areas. Facilities to evacuations. General specifications

GOST R 57026-2016: Liquefied natural gas fueled locomotives. Methods of test for leaks pipes, fittings and joints gas treatment systems

GOST R 57034-2016: Fiber-reinforced thermosetting plastics pipes and parts of pipelines. Determination of resistance to short-time hydraulic pressure of plastic pipes and fittings

GOST R 57407-2017: Carbon fibers. General technical requirements and test methods

GOST R 57413-2017: Combustible natural gas. State reference materials on the basisd magistral gas. Specification

GOST R 57528-2017: Equipment for diving. Diving breathing apparatus with a half breath scheme. General technical requirements

GOST R 57529-2017: Saving means for crew of installations operated on water areas. Inflatable means for mass collection of floating people. General specifications

GOST R 57790-2017: Timber bearing structures. Methods of strength and deformability testing

GOST R 58108-2019: Individual means of rescue on the water. Life and safety vests. General specifications

GOST R 58121.3-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings

GOST R 58382-2019: Fire fighting equipment. Portable fire smoke exhausters. General technical requirements. Test methods

GOST R 58540-2019: Fire fighting equipment. Semi-rigid pressure fire hoses. General technical requirements. Test methods

GOST R 58584-2019: Mining engineering. Switch points in self-rescuers. Safety requirements. Test methods

GOST R 58762-2019: Mobile buildings (inventory). Sanitary systems. General specifications

GOST R 58869-2020: Mining engineering. Directional hydraulic fracturing of the roof of rocks in coal mines

GOST R 58893-2020: Polyurethane-based adhesive compositions for fixing the thermal insulation layer in facade thermal insulation composite systems with external plaster layers. Specifications

GOST R 58900-2020: Bent steel sheet profiles with trapezoidal corrugations for construction. Load-bearing test method

GOST R 59413-2021: Main pipeline transportation of oil and oil products. Pipe fittings. Vibration Testing Techniques

GOST R 70042-2022: Symmetrical communication cables for broadband access networks. General technical specifications

GOST R 70043-2022: Telephone cables with polyethylene insulation in a plastic sheath. General specifications

GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters

GOST R 70398-2022: Balls for the sport of volleyball. Specifications

GOST R 70407-2022: Flexible sanitary and technical water supply line. Specifications

GOST R 70545-2022: Coal coke. Method for determination of reactivity

GOST R 70601-2022: Balls for the sport of "handball". Specifications

GOST R 70602-2022: Balls for the sport of water polo. Specifications

GOST R 8.1012-2022: State system for ensuring the uniformity of measurements. Water meters. Verification procedure

GOST R 8.789-2012: State system for ensuring the uniformity of measurements. The bomb calorimeters. The method of the verification

GOST R 8.816-2013: State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter

GOST R 8.905-2015: State system for ensuring the uniformity of measurements. Indicating pressure gauges. Ordinary measuring instruments. Metrological requirements and test methods

GOST R 8.914-2016: The state system for ensuring the uniformity of measurements. Gas calorimeters. Verification procedure

GOST R 8.975-2019: State system for ensuring the uniformity of measurements. Sources of microflows of gases and vapors. General specifications

GOST R 8.976-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition of calibration gas mixtures. General specifications

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines

IM 14-12-2004: Automation. Instruments for measuring and regulating pressure and vacuum. Nomenclature directory

LPJe-13/05: The method of separate determination of mono- and nitrogen dioxide in the emissions of glass production

LPJe-13/06: Method for determining process dust in glass production emissions

MI 1592-2015: Recommendation. State system for ensuring uniformity of measurements. Water meters. Method of verification

MI 1703-87: Guidelines. State system for ensuring uniformity of measurements. Electromagnetic flowmeters. Method of verification

MI 1864-88: State system for ensuring uniformity of measurements. Fuel dispensers. Method of verification

MI 2056-90: Pneumatic plugs for holes from 3 to 160 mm. Methods of control.

MI 2096-2009: Recommendation. State system for ensuring uniformity of measurements. Combustion calorimeters with a bomb (liquid). Method of verification

MI 2124-90: State system for ensuring uniformity of measurements. Pressure gauges, vacuum gauges, vacuum gauges, pressure gauges, pressure gauges and pressure gauges showing and recording. Method of verification

MI 2177-91: Recommendation. Measurement and measurement control. Information on measurement errors in the design and technological documentation

MI 2189-92: State system for designating uniformity of measurements. Pneumatic differential pressure transmitters. Method of verification

MI 2203-92: Recommendation. State system for ensuring uniformity of measurements. Test methods for measuring pressure. Datasheets

MI 2529-99: State system for ensuring uniformity of measurements. Chemical gas detectors GH-E. Method of verification

MI 2579-2000: State system for ensuring uniformity of measurements. Tanks (tanks) of river and sea bulk vessels. Method of verification by the volumetric method

MI 2595-2000: State system for ensuring uniformity of measurements. Capacity of storage tanks for petroleum products. The method of measurement using liquid counters and the compilation of calibration tables

MI 2729-2002: State system for ensuring uniformity of measurements. Fuel dispensers. Primary calibration technique

MI 2786-2003: Recommendation. State system for ensuring uniformity of measurements. Installation mass measuring ASMA. Test methods

MI 2834-2003: State system for ensuring uniformity of measurements. Water meters. Methods of calibration with the use of reference mernik

MI 2948-2005: Wet gas generators reference dynamic type "Spring". Method of verification

MI 2992-2006: Recommendation. State system for ensuring uniformity of measurements. Buried trench tanks with capacity from 5,000 to 10,000 m3. Method of verification by the volumetric method

MI 3291-2010: State system for ensuring uniformity of measurements. Flowmeters-counters PC-SPA-M. Method of verification using simulation methods

MI PrV-2015/1: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of sulfur dioxide in gases organized by IZA (photometric method)

MI PrV-2015/3: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of dust in gases organized by IZA

MI PrV-2015/4: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of solid fluorides in gases organized by IZA (potentiometric method)

MI PrV-2016/1: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of aluminum oxide in gases organized by IZA

MI PrV-2016/4: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of hydrogen fluoride in gases organized by IZA (photometric method)

MI PrV-2016/5: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of chlorine in gases organized by IZA (photometric method)

MI PrV-2017/1: Industrial emissions of pollutants into the atmosphere. Method for measuring the mass concentration of resinous substances in gases organized by IZA (gravimetric method)

MU 08-47/039: Methods of quantitative chemical analysis of samples of vegetable and fruit juices, compotes, products of their processing for the content of tin and lead by inversion voltammetry

MU 08-47/086: Milk and dairy products. Differential voltammetric method for determining the mass fraction of chloramphenicol

MU 08-47/106: The eggs. Meat and offal of slaughter animals. Determination of mass concentrations of chloramphenicol by voltammetry

MU 08-47/111: Determination of the content of chloramphenicol and tetracycline hydrochloride in tablets, capsules and eye drops by voltammetry

MU 08-47/113: Baby food, juices, fruits, berries. Voltammetric method for determining the mass concentration of vitamin C

MU 08-47/114: Automobile gasolines. Inversion voltammetric method for determining the mass concentration of lead

MU 08-47/132: Food raw materials and food products. Voltammetric method for measuring the mass concentration of selenium

MU 08-47/136: Food products and food raw materials. Inversion voltammetric methods for determining the content of toxic elements (cadmium, lead, copper and zinc)

MU 08-47/141: Biologically active additives. Voltammetric method for determining the mass concentrations of vitamins C, B1, B2, E and quercetin

MU 08-47/144: Baby food, juices, fruits, berries and fortified drugs. Voltammetric method for determining the mass concentration of vitamin B2

MU 08-47/145: Kids toys. Inversion voltammetric method for determining the mass concentrations of toxic elements (arsenic, mercury, selenium, cadmium, lead and antimony)

MU 08-47/147: Surface, natural, drinking and waste water. Inversion voltammetric method for determining the mass concentration of aniline

MU 08-47/150: Feed, feed products of processing enterprises, compound feeds, premixes, protein and vitamin supplements. Inversion voltammetric method for measuring the mass concentration of arsenic

MU 08-47/151: Cosmetic preparations and decorative cosmetics. Inversion voltammetric method for measuring the mass concentration of zinc, cadmium, lead and copper

MU 08-47/154: Vegetable and fruit juices, compotes, processed products of vegetables and fruits. Inversion voltammetric method for measuring mass concentrations of tin and lead

MU 08-47/155: Alcoholic drinks. Inversion voltammetric method for measuring the mass concentration of cobalt

MU 08-47/156: Alcoholic drinks. Inversion voltammetric method for measuring the mass concentration of nickel

MU 08-47/157: Milk and dairy products. Inversion voltammetric method for measuring the mass concentration of cobalt

MU 08-47/158: Vegetables, fruits and their products. Stripping voltammetric methods for determining mass concentrations of arsenic and mercury

MU 08-47/159: Cosmetic preparations. Inversion voltammetric method for measuring the mass concentration of mercury

MU 08-47/160: Milk and dairy products. Inversion voltammetric method for measuring the mass concentration of mercury

MU 08-47/162: Natural, drinking and treated sewage. Voltammetric method for measuring the mass concentration of mercury

MU 08-47/164: Vegetables, fruits, berries and their processed products, baby food. Voltammetric method for determining the mass concentration of vitamin B1

MU 08-47/167: Fish, seafood, non-fish fishing objects and products produced from them. Voltammetric method for measuring the mass concentration of mercury

MU 08-47/168: Alcoholic and non-alcoholic drinks. Voltammetric method for measuring the mass concentration of mercury

MU 08-47/169: Canned food. Voltammetric method for measuring the mass concentration of tin and lead

MU 08-47/174: Natural, drinking and treated sewage. Voltammetric method for measuring mass concentrations of manganese, antimony and bismuth

MU 08-47/175: Food products and food raw materials. Inversion voltammetric method for determining the mass concentration of arsenic

MU 08-47/176: Drinking water, natural, technological and treated sewage. Inversion voltammetric method for determining the mass concentration of arsenic

MU 08-47/178: Drinking water, mineral, natural. Voltammetric method for measuring the mass concentration of nitrate ions

MU 08-47/187: Natural, drinking and treated sewage. Voltammetric method for measuring mass concentrations of nickel

MU 08-47/188: Fatty foods. Voltammetric method for measuring mass concentrations of nickel

MU 08-47/189: Natural, drinking, technologically clean, purified waste water. Voltamperometric method for measuring phenol mass concentrations

MU 08-47/196: Meat and meat products. Inversion voltammetric method for measuring the mass concentration of mercury

MU 08-47/203: The soil. Method for measuring mass concentrations of zinc, cadmium, lead, copper, manganese, nickel, cobalt, iron, arsenic, selenium and mercury by inversion voltammetry

MU 08-47/204: Flour, groats, flour-and-cereals, bread and bakery products with additives of vitamin-mineral mixtures. Voltammetric method for measuring the mass concentration of vitamin B1

MU 08-47/205: Medications. Voltammetric method for measuring the mass fraction of azithromycin dihydrate

MU 08-47/206: Food products and food raw materials. Voltammetric method for measuring the mass concentration of iodine

MU 08-47/220: Bioobjects (hair). Inversion voltammetric method for measuring mass concentrations of manganese, antimony and bismuth

MU 08-47/221: Vegetable raw materials, extracts and drinks based on it. Voltammetric method for measuring the mass concentration of selenium forms

MU 08-47/222: Breast milk. Inversion voltammetric method for measuring mass concentrations of elements and vitamins

MU 08-47/229: Sugar. Inversion voltammetric method for measuring the mass concentration of mercury

MU 31-14/06: Quantitative chemical analysis of samples of natural, drinking, waste water and technological aqueous solutions. Methodology for measuring mass concentrations of nickel and cobalt by inversion voltammetry on TA-type analyzers

MU 31-18/06: Quantitative chemical analysis of soil samples, greenhouse soils, silts, bottom sediments, sapropels, solid waste. Methodology for measuring mass concentrations of nickel and cobalt by inversion voltammetry on TA-type analyzers

MU 36.22.14-00: Guidelines for conducting static tests of crane-pipelayers

MUK 4.1.1629-03: Measurement of mass concentrations of 1,1-difluoroethylene in working zone area by gas chromatography

MUK 4.1.2090-06: Measurement of mass concentrations of sublimates of coal tar and pitches (resinous substances) by the pectral-fluorescent method in the air of the working area

MUK 4.1.2243-07: Measurement of mass concentrations of benz (a) pyrene in the air of the working area by the spectral-fluorescent method

MUK 4.1.2470-09: Measurement of mass concentrations of dihydrosulfide (hydrogen sulfide) in the air of the working area by reaction with ammonium molybdate by photometry

MUK 4.1.2474-09: Measurement of mass concentrations of dihydrosulfide (hydrogen sulfide) in the air of the working area by the reaction with paraphenylenediamine with hydrochloric acid photometry

MVI 07-04: Methods for measuring the mass concentration of iron (Fe 3) in industrial emissions by the photometric method

MVI 61-09: Methodology for measuring deaeration time in samples of mineral and fire-resistant (type OMTI) turbine oils

MVI M-34-04: Methods for measuring the mass concentration of metals in the air of the working area and air emissions of industrial enterprises by the atomic absorption method with electrothermal atomization

NPB 101-2005*: Fire safety standards of the Republic of Belarus. The main fire trucks. General technical requirements. Test methods

NPB 151-2000: Fire-fighting cabinet. Technical requirements of fire safety. Test methods

NPB 151-96: Complete set of fire crane. General technical requirements. Test Methods

NPB 152-2000: Fire equipment. fire hose. Technical requirements of fire safety. Test methods

NPB 152-96: Fire hose. General technical requirements. Test Methods

NPB 155-2002: Fire engineering. Fire extinguishers. The order of statement of fire extinguishers on production and realizations of certified tests

NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods

NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods

NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods

NPB 181-99: Fire water tenders , complete parts and accessories. Release from repair. General technical requirements. Test methods

NPB 199-2001: Engineering fire. Extinguishers. Pressurizing sources. Communal specifications. Test methods

NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods

NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods

NPB 80-99: Automatic fire water mist spray extinguishing systems. modules. General technical requirements. Test methods

OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia

OST 108.030.132-80: Stationary steam boilers. Test methods.

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-07-1023-80: Automatic pipeline fittings. General specifications.

OST 26-07-2019-81: Bellows from alloy VТ1-0. Specifications.

OST 26-12-2012-79: Centrifugal compressors. Methods of gas-dynamic tests.

PB 03-428-02: Safety Requirements for Construction of Underground Structures

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PMG 65-2003: State system for ensuring the uniformity of measurements. Rail tankers. General requirements for methods of verification by a volumetric method

PND F 12.1.1-99: Guidelines for sampling in determining the concentration of harmful substances (gases and vapors) in industrial emissions.

PND F 13.1.30-02: Quantitative chemical analysis of atmospheric air and air emissions. Methods for chromatographic measurement of turpentine mass concentration in industrial emissions from industries related to its individual production and use using a universal disposable sampler

PND F 13.1.31-02: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the mass concentration of chromium hexavalent in industrial emissions of electroplating, metallurgical and chemical production by the photometric method

PND F 13.1.32-02: Quantitative chemical analysis of atmospheric air and air emissions. Gas chromatography method for measuring the mass concentration of esters (ethyl acetate, propyl acetate, butyl acetate, ethyl butyrate, isoamylacetate) in industrial emissions using a universal disposable sampler

PND F 13.1.33-2002: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of ammonia in industrial emissions into the atmosphere by the photometric method

PND F 13.1.34-2002: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring mass concentrations of hydrogen sulfide and methyl mercaptan in industrial emissions of enterprises using potentiometric argenometric titration

PND F 13.1.41-2003: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of formaldehyde in samples of industrial emissions into the atmosphere by the photometric method with acetylacetone

PND F 13.1.46-04: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the mass concentration of sulfuric acid, vapor and aerosols of sulfur trioxide (in terms of sulfuric acid) in industrial emission samples using the turbidimetric method

PND F 13.1.50-2006: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of chlorine in industrial emissions into the atmosphere by the photometric method using the iodine starch reaction

PND F 13.1.52-06: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of caustic alkali and carbonate aerosol (total) in gas emissions by the titrimetric method

PND F 13.1.54-2007: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of organic acids (C1 - C6) in industrial emissions into the atmosphere by gas chromatography

PND F 13.1.57-07: Methods for measuring mass concentrations of vapor and volatile mercury compounds in atmospheric sources by the photometric method

PND F 13.1.58-07: Method for measuring the mass concentration of chlorine in the sources of atmospheric pollution by the titrimetric method. M-03-01

PND F 13.1.60-2007: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the mass concentrations of carbon disulfide in industrial emissions into the atmosphere by the photometric method

PND F 13.1.61-2007: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring mass concentrations of phosphoric acid and phosphoric anhydride in industrial emissions into the atmosphere by the photometric method

PND F 13.1.69-09: Method for measuring the mass concentration of hydrofluoric acid salts in terms of fluoride ion in industrial emissions into the atmosphere by the photometric method

PND F 13.1.75-2013: Methods of measuring the mass concentration of sulfuric acid aerosol and soluble sulfates in industrial emissions into the atmosphere by the turbidimetric method

PND F 13.1:2:3.62-2007: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of acrolein in industrial emissions into the atmosphere, in the atmospheric air of populated areas, sanitary protection zone, air of the working area by photometric method

PND F 13.1:2:3.71-11: Methods of measuring mass concentrations of polluting components (metals) in the air of the working area, atmospheric air, industrial emissions into the atmosphere by inductively coupled plasma atomic emission spectrometry (E-232-2010)

PND F 13.3.18-98: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring mass concentrations of acetone, ethyl acetate, toluene, butyl acetate, m-, p-xylene and o-xylene in ambient air samples using gas chromatography

PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters

PNST 357-2019: The brake system of the truck wagons. Technical requirements and test methods

PNST 363-2019: Children's safety vests for active water tourism. Technical conditions

POT R M-015-2000: Intersectoral labor protection regulations for the operation of freon refrigeration units

POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals

R 50.2.048-2005: State system for ensuring uniformity of measurements. Means of measuring flash point in an open crucible. Method of verification

RD 08-272-99: Safety requirements for drilling equipment for the oil and gas industry.

RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 153-34.0-11.340-00: Method for Measurements of Pressure in Steam and Hot Water Boilers, Vessels, and Piping of Thermal Power Station Process Equipment Subject to Monitoring and Inspection by Gosgortekhnadzor of Russia Offices

RD 153-34.1-27.301-2001: Test methods for ash collecting plants of thermal power plants and boilers

RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation

RD 27.05.01-2017: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524) mm track gauge main railways

RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports

RD 34.02.310-89: Method for Tests of Atmospheric Steam Discharge Noise Silencers

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 34.37.529-96: Process Waters of Thermal Power Stations. Method for the Determination of Quality of Water Delivered to Reverse Osmosis Unit

RD 34.39.101: Guidelines for Design, Construction, and Acceptance of Gas Pipelines Supplying Natural Gas to Boilers at District Electric Power Generating Stations

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.43.102-96: Guidelines for Use of Petroleum-Based Turbine Oils

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 34.49.502-96: Guidelines for Operation Air-Mechanical Foam Fire Extinguishing Systems

RD 34-10-100-91: Installation instructions for NPP technological pipelines

RD 52.04.186-89: Part 1. Guidance on the control of air pollution. Pollution of the atmosphere in cities and other settlements. Main Geophysical Observatory. A.I.Voyeikova (MGO)

RD 52.04.836-2015: Mass concentration of volatile chlorocarbons in atmospheric air. Measurement procedure by high-performance capillary gas chromatography using headspace analysis

RD 52.04.837-2015: Mass concentration of volatile aromatic hydrocarbons in atmospheric air. Measurement procedure by high-performance capillary gas chromatography using headspace analysis

RD 52.04.838-2015: Mass concentration of volatile aromatic hydrocarbons in atmospheric air. Measurement procedure by gas chromatography using headspace analysis

RD EO 1.1.2.09.0772-2012: Methods of assessing the technical condition and resource characteristics of systems and fire protection ?a nuclear power plants

RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives

RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI

RMG 108-2011: State system for ensuring the uniformity of measurements. Verticil reinforced-concrete tanks. Procedure of verification by volumetric method

RMG 112-2010: State system for ensuring the uniformity of measurements. Tanks of river and sea liquid cargo vessels. Procedure of verification by volumetric method

SP 129.13330.2019: External networks and water supply and sewerage facilities

SP 378.1325800.2017: Offshore pipelines. Design and construction rules

SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities

SP 86.13330.2014: Main (Trunk) pipelines

ST CKBA 122-2018: Pipe fittings. Testing method for resistance to vibration

ST RK 1505-2006: Food products. Determination of antibiotics by stripping voltammetry (levometsitin, tetracycline group)

ST RK 1820-2008: Refrigeration cars. Thermo-technical test procedure. Put into effect in substitution of OST 21.051.65-86

ST RK 1980-2010: Fire engineering. Basic fire fighting trucks. General specification

ST RK 2486-2014: Protection of Nature. drinking water, natural, clean technology, waste, treated waste. Determination of mass concentration of cobalt, tin, and lead by stripping voltammetry

ST RK 2487-2014: Protection of Nature. drinking water, natural, clean technology, waste, treated waste. Determination of mass concentration of potassium, selenium and silver by stripping voltammetry

ST RK 2644-2015: The cables combined for systems of video surveillance. Technical conditions

ST RK GOST R 51153-2005: Non-alcoholic carbonated drinks of grain. Method for carbon dioxide determination

ST RK GOST R 51301-2005: Food products and food staples. Inversion voltampermetric methods of determination of toxic components (cadmium, lead, copper and zinc) -

ST RK GOST R 51827-2008: Packagings. Airtightness and hydraulic pressure testing methods

ST RK STB 1315-2008: Canned food. Method for determination of tin and lead content by stripping voltammetry using TA analyzers

ST SSFZhT TsUO 082-2000: Rolling stock and special railway rolling stock fire detection and fire extinguishing sys-tems. Standard test methods

ST TsKBA 017-2005: Pipe fittings. General technical conditions

ST TsKBA 039-2010: Pipe fittings. Periodic testing of bellows. General requirements

ST TsKBA 080-2015: Pipe fittings. Methods of testing for seismic resistance

ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions

ST TsKBA 083-2016: Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

ST TsKBA 116-2015: Pipe fittings. Reliability tests. Recommendations on the development of the program and test methods

ST TsKBA 117-2017: Pipe fittings. Methods of hydraulic calculation of check valves and gates

STB 1313-2002: Foodstuffs and food raw materials. Method for determining the content of toxic zinc, cadmium, lead and copper elements by anodic stripping voltammetry on the TA analyser

STB 1314-2002: Milk and milk products. Method for determining the content of toxic zinc, cadmium, lead and copper elements by anodic stripping voltammetry on the TA analyser

STB 1315-2002: Canned products. Method for determining the content of stannum and lead by anodic stripping voltammetry on the TA analyser

STB 1575-2005: Mechanized timberings for benches. Basic parameters. General specifications. Test methods

STB 1973-2009: Liquid perfume products. General specifications

STB 2106-2010: Pyrotechnic articles. Test methods

STB 2158-2011: Construction. Device bridges and pipes. The nomenclature of controlled quality indicators. Quality control of work

STB 2240-2011: Perfume and cosmetic products in aerosol containers. General specifications

STB 2511-2017: The system of fire safety standards. Fire trucks main. General technical requirements. Test methods

STB GOST R 51756-2002: Aluminum banks of deep drawing with easy-to-open lids. Specifications

STB GOST R 51827-2002: Containers. Test methods for leak tightness and hydraulic pressure

STP 07.81-623-89: Selection of pressure measuring instruments

TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications

TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines

TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications

TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel

TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions

TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions

TU 26-05-108-88: Acetylene mobile generators of continuous action with a capacity of up to 3 m3

TU 26-05-492-78: High pressure acetylene valves

TU 26-07-414-87: Cranes, type tension cone coupled on Ru 6. Specifications

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 3612-013-00220302-99: Shell-and-tube heat exchangers for special purposes. Evaporators with steam space and tube bundles to them

TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions

TU 3615-018-00217320-2006: Spherical tanks. Technical specifications

TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications

TU 3645-001-05693446-98: Installation of SGN-1 supersonic gas-plasma spraying coatings

TU 3645-002-16989527-99: PKN-03 Cutter for manual oxygen cutting

TU 3645-033-05785477-98: Torch propane-oxygen for powder surfacing GN-5P

TU 38 0051166-98: Rubber compounds for the rubber products of aircraft

TU 48-1-73-88: Feeder feeders from platinum metals and alloys. Technical conditions

TU 6-14-95-2014: Clay Leukonate

TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!