TU 5851-008-01388383-2002
ТУ 5851-008-01388383-2002
|
|
Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
Балки железобетонные с каркасной арматурой для пролетного строения автодорожных мостов и путепроводов длиной 12, 15 и 18 м. Технические условия
Status: Reference materials, MP, TPR
Technical specifications apply to prefabricated reinforced concrete beams of T-section, reinforced with frame reinforcement, 12, 15 and 18 m long for span structures of bridges and overpasses located on the roads of the Russian Federation for operation in all climatic zones with seismicity up to 9 points inclusive.
Технические условия распространяются на сборные железобетонные балки таврового сечения, армированные каркасной арматурой, длиной 12, 15 и 18 м для пролетных строений мостов и путепроводов, расположенных на автомобильных дорогах Российской Федерации, для эксплуатации во всех климатических зонах с сейсмичностью до 9 баллов включительно.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Soyuzdorproject Mintransstroy,
3/20/2002
SKU: RUSS199304
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Industry Standards and Specifications »
Technical conditions »
The Document References:
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance
GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181.0-81: Concrete mixtures. General requirement to test methods
GOST 10181.1-81: Concrete mixture. Test method of determination of workability
GOST 10181.2-81: Concrete mixture. Test method of determination of density
GOST 10181.3-81: Concrete mixture. Test method of determination of porosity
GOST 10181.4-81: Concrete mixtures. Test methods of determination of segregatability
GOST 10446-80: Wire. Tensile test method
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 12004-81: Reinforcing-bar steel. Tensile test methods
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13015.2-81: Prefabricated concrete and reinforced concrete constructions and products. Marking
GOST 13015.3-81: Prefabricated concrete and reinforced concrete constructions and products. Quality certificate
GOST 13015.4-84: Prefabricated concrete and reinforced concrete costructions and products. Rules for transportation and storage
GOST 14019-80: Metals. Methods of bend tests
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 14192-96: Cargo marking
GOST 1497-84: Metals. Methods of tension test
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1579-93: Wire. Bend test method
GOST 166-89: Vernier callipers. Specifications
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 18105-86: Concretes. Rules for the strength control
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 22236-85: Cements. Rules of acceptance
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 23464-79: Cements classification
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements
GOST 24211-91: Concrete additives. General technical requirements
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 28013-89: Mortars. General specifications
GOST 28277-89: Non-destructive testing. Welded joints. Electroradiography method. General requirements
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 310.1-76: Cements. Test methods
GOST 310.2-76: Cements. Methods of grinding fineness determination
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 380-94: Normal quality carbon steel
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5521-93: Shipbuilding rolled steel
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 7502-89: Measuring metal tapes. Specifications
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-94: Metal products
GOST 8735-88: Sand for construction work. Testing methods
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
VSN 4-81: Inspection Guidelines to Road Overpasses and Underpasses
VSN 6-90: Requirements on Diagnostics and Assessment of the Condition of Roads and Highways
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.