imgalt

GOST 977-88

ГОСТ 977-88

Steel castings. General specifications

Отливки стальные. Общие технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

Binding material on a film-coated paper. Multiple bending test method

Стандарт распространяется на стальные отливки, изготавливаемые всеми способами литья из нелегированных и легированных конструкционных, легированных со специальными свойствами литейных сплавов.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 12/22/1988

SKU: RUSS19935

Price: $429.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.80 Cast iron and steel castings »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.80 Cast iron and steel castings »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V8 Casting of various metals » V82 Steel Castings »


As a Replacement Of:

GOST 2176-77: High-alloy steel castings with special qualities. General specifications

GOST 977-75: Castings made of construction alloy-free and alloy-treated steel. General specifications

The Document References:

GOST 10145-81: Metals. Stress-rupture test method

GOST 11150-84: Metals. Methods of tension tests at low temperatures

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium

GOST 1497-84: Metals. Methods of tension test

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 2176-77: High-alloy steel castings with special qualities. General specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.14-88: Carbon steel and unalloyed cast iron. Methods for determination of zirconium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 3212-92: Gated patterns. Pattern tapers, core prints, dimensional tolerances

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance

GOST 6130-71: Metals and method of determining their heat resistance

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

GOST 977-75: Castings made of construction alloy-free and alloy-treated steel. General specifications

The Document is Referenced By:

GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications

FTS ZhT TsT 028-99: Brake block holders of the locomotives for main-line railways. Certification requirements

FTS ZhT TsT-TsV-TsL 018-99: Mechanical components of brakes of railway cars. Certification requirements

GOST 10037-83: Autoclaves for building industry

GOST 10527-84: Four-wheel bogies of passenger cars for mainline railways gauge 1520 mm. Specifications

GOST 10674-2022: Tank wagons. General specifications

GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications

GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions

GOST 10935-2019: Cargo freight cars. General specifications

GOST 10935-2022: Covered freight cars. General specifications

GOST 10935-82: Freight box cars of mainline railways, gauge 1520 mm, technical requirements

GOST 10935-97: Box-cars for 1520 mm gauge main line railways. General specifications

GOST 11004-84: Principal ventilation mine blowers

GOST 11042-90: Construction steel hammers. Specifications

GOST 11264-73: Chocks. Specifications

GOST 1204-67: Rotable brake shoe holder of the brake shoe for vehiclef of 1524 mm gauge. Specifications

GOST 12375-70: Single-rotor crushers for coarse grinding

GOST 12376-71: Single rotor crusher for medium and small grinding. Specifications

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 13154-67: Floating clamps for machine retaining devices. Design and dimensions

GOST 13159-67: Adjustable jacks for machine retaining devices. Design and dimensions

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 13556-91: Building tower pillars building tower pillars

GOST 1425-93: Lief springs for railway rolling stock. Technical requirements

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 1557-67: Stepped supports for machine retaining devices. Design and dimensions

GOST 1559-67: Screw sprags for machine retaining devices. Design

GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications

GOST 15851-84: Suspension devices for mine cages

GOST 16162-85: Standard reducers. General specifications

GOST 16438-70: Sand and metal moulds for making of fluidity of metals tests

GOST 16488-70: Drivers for grinding. Design

GOST 16556-2016: Ground connections for movable electric units. General specifications

GOST 16556-81: Grounding rods for mobile electrical equipment

GOST 16818-85: Sand mould intended to produce the sample blanks for testing the mechanical properties of flaky graphite grey cast iron

GOST 16890-71: Plates for knee rack-and-pinion-operated jigs. Design

GOST 16893-71: Plates for portal rack-and-pinion-operated jigs. Design

GOST 16935-93: Manually and power driven round rotary tables

GOST 17053.2-80: Inserts for ship shock absorbers АКСС-М. Specifications

GOST 17166-71: Accessory tool for metal-cutting machines. General technical requirements

GOST 17662-72: Units for changeable sheet stamping cutting dies with diagonally-positioned guide posts. Construction and dimensions

GOST 17663-72: Units for changeable sheet stamping cutting dies with four guide posts. Construction and dimensions

GOST 17671-72: Units and set articles for changeable sheet stamping cutting dies. Technical requirements

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 19305-73: Centrifugal moulds with threaded shank and latch locks. Construction and dimensions

GOST 19306-98: Centrifugal moulds with threaded shank and centrifugal locks. Construction and dimensions

GOST 19307-73: Centrifugal moulds with flange and latch locks. Construction and dimensions

GOST 19308-98: Centrifugal moulds with flange and centrifugal locks. Construction and dimensions

GOST 19309-98: Centrifugal moulds with flange, inserts and centrifugal locks. Construction and dimensions

GOST 19310-98: Pushers for centrifugal moulds. Construction and dimensions

GOST 19311-98: Caps for centrifugal moulds. Construction and dimensions

GOST 19313-98: Centrifugal locks for centrifugal moulds. Construction and dimensions

GOST 19314-73: Double clamping collars for centrifugal moulds. Construction and dimensions

GOST 19315-98: Triple clamping collars for centrifugal moulds. Construction and dimensions

GOST 19334-73: Connection parts for pipe-lines and metal-reinforced hoses. Types, basic dimensions and technical requirements

GOST 19388-74: Fixing cramps for split core boxes. Design and dimensions

GOST 19410-74: Metal core boxes. Specifications

GOST 20162-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1200x1000 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions

GOST 20163-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1600x1200 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions

GOST 20164-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2000x1600 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions

GOST 20165-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2600x1600 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions

GOST 20166-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2500x2000 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions

GOST 20527-82: Angle fittings for gross weight freight containers. Design and dimensions

GOST 20720-93: Double-slider couplings. Parameters and dimensions

GOST 20742-93: Chain couplings. Parameters and dimensions

GOST 20761-96: Flange couplings. Parameters, design and dimensions

GOST 21357-87: Castings made of cold- and wear- resistant steel

GOST 2216-84: Adjustable smooth snap gauges

GOST 22253-76: Friction draft gears for 1520 mm gauge railway rolling stock. Specifications

GOST 22326-93: Joints by flange dowels for wooden split patterns and core boxes. Design

GOST 22329-93: Screw strainers for wooden split core boxes. Design

GOST 22334-93: Trunnions for wooden cast patterns. Design

GOST 22472-87: Dies for a sheet-metal stamping

GOST 22475-77: Bolt fixtures for master pattern plates. Design and dimensions

GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 24379.0-2012: Foundation bolts. General specifications

GOST 24379.0-80: Foundation bolts. General specification

GOST 24401-80: Casting die beams. Construction and dimensions

GOST 25056-81: Cast deck and ship hawses. Specifications

GOST 25088-81: Ship's doors. Specifications

GOST 25088-98: Ship's doors. Specifications

GOST 25309-94: Covers of access hatches. Specifications

GOST 25496-82: Anchors with high holding power. Specifications

GOST 25573-82: Freight handling rope slings for construction

GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications

GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions

GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates

GOST 26686-2022: Flatcars. General specifications

GOST 26686-96: Flat car backtone railroad bore 1520 mm gauge. General technical specifications

GOST 26725-2022: Open wagons. General technical conditions

GOST 26725-97: Freight gondolas for main lines with the track 1520 mm. General specifications

GOST 26957-97: Variators with wide-angle belt pulleys. General specifications

GOST 27358-87: Press moulds for manufacturing of plastic items

GOST 28241-89: Hand wise. Specification.

GOST 28408-89: Manual hoists and trolleys. General specifications

GOST 28433-90: Retrievers

GOST 28434-90: Overhead travelling stacker cranes

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

GOST 30243.1-97: Open hopper wagons of 1520 mm gauge for the loose materials. General specifications

GOST 30243.2-97: Covered hopper wagons of 1520 mm gauge for the transport of cement. General specifications

GOST 30243.3-99: Covered hopper wagons for loose materials of 1520 mm gauge. General specifications

GOST 3032-76: Fly nuts. Construction and dimensions

GOST 30482-97: Electroslag welding of steels. Requirements for technological process

GOST 3050-77: Hose joints for flexible hoses

GOST 30632-99: Brake block holder and key for 1520 mm main-line locomotives. General specifications

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines

GOST 31.2031.02-91: Readjusted collapsible devices for part assembly under welding

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests

GOST 31428-2011: Shunting diesel locomotives. General technical requirements

GOST 31592-2012: Machine reducers. General specifications

GOST 31832-2012: Well sucker rod pump drives. General technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 32216-2013: Special railway rolling stock. General technical requirements

GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32578-2013: Cranes. Metal structures. Requirements for materials

GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 3269-78: Stationary brake shoe holder for freight wagons of the 1520 mm gauge railways. Specifications

GOST 32885-2014: Automatic coupler model SA-3 and its components. Design and dimensions

GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34075-2017: Brake block holder and key for railway rolling stock. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34329-2017: Formworks. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications

GOST 34387-2018: Side bearings of the freight wagon bogies. General specifications

GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications

GOST 34484-2018: Stationary steam turbines. Strength calculation standards for cylinder bodies and valves

GOST 34503-2018: Wedges friction trolleys of freight cars. General specifications

GOST 34504-2018: Automotive vehicles. Jacks are mechanical. Technical requirements and test methods

GOST 34625-2019: Gear lever brake traction rolling stock. General specifications

GOST 34697-2020: End and release valves. General specifications

GOST 34717-2021: Cast side member and bolster cast triaxial bogies for freight wagons. Specifications

GOST 34767-2021: Balance board of three-axle bogies for freight wagons. Specifications

GOST 34769-2021: Cotter beam for bogies of three-axle freight wagons. Technical specifications

GOST 34904-2022: Ship pipeline valves. General specifications

GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 4045-75: Hand-operated bench vice

GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications

GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock

GOST 4686-2012: Brake beams of brake leverage gear. Specifications.

GOST 4686-74: Brake beams of brake leverage gear for 1520 (1524) mm wide gauge main-line railway freight car bogie-trucks. Specifications

GOST 4860.1-83: Glands for for electric cables and wires

GOST 5006-83: Toothed clutches. Specifications

GOST 5105-82: Steel fuel and oil tanks

GOST 5332-75: Rollers and spacings of roll tables of rolling mills. General specifications

GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications

GOST 5973-2022: Dumper cars. General specifications

GOST 5973-91: Dump cars for 1520 mm railway gauge. General specifications

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7090-72: Single-rotor hammer crushers

GOST 7370-2015: Railway frogs. Specifications

GOST 7370-98: Railroad frogs of P75, P65 and P50 types. Specifications

GOST 765-85: Anchor shackles. Specifications

GOST 766-74: Anchors. General specifications

GOST 8497-78: Matrosov's anchor. Specifications

GOST 8802-78: Passenger tram-cars. Specifications

GOST 9.402-80: Metal surface preparation for painting

GOST 9274-81: Rolls for stone separating and ceramic mixture grinding

GOST 9321-73: Rollers. Specifications

GOST 9789-75: Safety spring full-lifted flanged steel valves for p stip "1.6 and 4.0 MPa (16 and 40 kgf/cm2)

GOST 9984-85: Ceramic support insulators rated for voltage over 1000 v

GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure

GOST R 50891-96: Machine reducers. General specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 51177-2017: Overhead line hardware. General technical requirements

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51268-99: Scissors. General specifications

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

GOST R 51891-2002: Series 1 freight containers. Corner fittings. Specifications

GOST R 51891-2008: Series 1 freight containers. Fittings. Specifications

GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications

GOST R 52151-2003: Pile driving diesel hammers. Covers. General specifications

GOST R 52277-2004: Tamping picks of ballast tampers for levelling and lining railway tracks. Specifications

GOST R 52283-2004: Fire-fighting centrifugal pumps. General technical requirements. Test methods

GOST R 52400-2005: Air reservoirs for railway brakes. General specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52916-2008: Stops of automatic coupler equipment for freight and passenger cars. General specifications.

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53628-2009: Metal roller bearing parts for bridge building. Specifications

GOST R 53675-2009: National standard of the Russian Federation. Pumps for the trunk oil pipelines. General Requirements

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods

GOST R 53822-2010: Vehicles. Hydraulic jacks. Technical requirements and test methods

GOST R 53978-2010: Special railway rolling stock. General technical requirements

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 55727-2013: Mining equipment. Mine loading cars. General technical requirements and test methods

GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications

GOST R 55821-2013: Bogies of passenger cars on locomotive traction. Specifications

GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification

GOST R 57899-2017: Anchors and strains for formworks. General specifications

GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications

GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications

GOST R 58201-2018: Mining drilling for pneumatic and hydraulic anchorage installers. General specifications

GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection

GOST R 58352-2019: An international coastal connection for supplying water to a water extinguishing system. Dimensions and specifications

GOST R 58518-2019: Steel construction hammers. Technical conditions

GOST R 58753-2019: Cargo rope slings for construction. Technical specifications

GOST R 58878-2020: Sewage systems for ships. Design rules

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 59645-2021: Main pipeline transportation of oil and oil products. Steel castings for pipeline fittings and pumps. General specifications

GOST R 70463-2022: Four- and six-axle flatcars. General specifications

GOST R 70464-2022: Three-axle axle suspension bogies for freight wagons. General specifications

GOST R 70817-2023: Steel and alloys. Names and basic designations of grades

MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications

OST 108.004.109-80: Welded joint seams of CHP plant power equipment. Magnetic-particle control method.

OST 108.021.04-78: Steam Stationary Turbines. Welded diaphragms. Guide vanes. General specifications.

OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.

OST 24.090.39-78: Shell stacker cranes. Specifications.

OST 24.090.39-83: Shell stacker cranes. General specifications.

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements

OST 34 023-74: Winches special electric gantry hook cranes. Parameters and dimensions. Technical requirements

OST 34-10-471-89: Captivating welded and casted plates for turbo-units. Captivating casted non-symmetrical plates. Design and dimensions.

OST 34-10-472-89: Captivating welded and casted plates for turbo-units. Captivating casted non-symmetrical plates. Design and dimensions.

OST 34-10-473-89: Captivating welded and casted plates for turbo-units. Captivating welded and casted plates for dynamometer installation. Design and dimensions.

OST 34-10-476-89: Captivating welded and casted plates for turbo-units. Casted support. Design and dimensions.

OST 35-03-86: General specifications for Mintransstroy engineering products.

OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements

OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

PB 10-05-92: Installation and Safe Operation Requirements for Electrode Boilers and Boiler Plants

PB 10-115-96: Regulations of design and safe operation of pressure vessels

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control

R 50-54-33-87: Recommendations. Unified system for technological documentation (ESTD). Requirements for the paperwork on the technological processes of electrophysical and electrochemical processing methods

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 10-69-94: Typical technological process of installation electrical equipment. Main provisions.

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-34.1-39.603-99: Fittings repair manual of high parameters.

RD 153-39.1-36-99: Recommendations for the unification of oil pumps for oil refineries

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-207-88: Lifting machines. General requirements and production standards

RD 22-28-32-94: Album of cards of standard technological processes for repair by methods of welding and building-up of nodes of load-lifting cranes

RD 24.090.52-90: Lifting-transport machines. Materials for welded metal structures.

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-07-264-86: Anticorrosive weld deposit of sealing surfaces of pipeline fittings.

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

RD 31.28.09-93: Ship bearing bushes with antifriction layer of tin and lead alloy. Technical requirements on materials. Typical technological processes.

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 31.46.07-87: Rope grabs for bulk cargo. Typical strength calculations. Technique

RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements

RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.03.204: Safety rules when working with tools and accessories

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.

RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions

RD RTM 26-07-241-79: Surfacing of sealing surfaces of pipeline fittings with monel metal

Resolution: Rules for the design and safe operation of steam and hot water boilers

RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg

RTM 108.711.02-79: Power valves. Methods for determining the capacity of regulatory bodies and the choice of optimal flow characteristics

RTM 26-07-187-75: Casting of parts of pipe fittings of radius of curvature and casting transitions. Wall thickness

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

SO 34.26.731: Recommendations for improving the reliability of operation of boiler control valves and reducing power consumption for driving electric feed pumps at cross-link thermal power plants

SP 16.13330.2011: Steel structures

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 294.1325800.2017: The construction of steel. Design rules

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 494.1325800.2020: Spatial metallic coatings. Design rules

SP 53-102-2004: General rules for steel structure design

ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure

ST SSFZhT TsT 052-99: Shoes and brake pads for locomotives running on main railways. Standard testing method.

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

ST TsKBA 074-2009: Pipe fittings. Hubs and valve handles. Design, dimensions and specifications

ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!