GOST 22045-89
ГОСТ 22045-89
|
|
Overhead travelling single-beam cranes. Specifications
Краны мостовые электрические однобалочные опорные. Технические условия
Status: Effective - Supersedes. IUS 6-1989; The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to electric single-bridge bridge cranes, 3K operation mode groups according to GOST 25546 with an electric hoist and an electric hoist and an electric movement mechanism with a load capacity from 1 to 5 tons operating on three-phase current with voltage of 220, 240, 380, 400, 415 V 60 Hz and voltage of 220, 380, 400, 440 V with a frequency of 60 Hz, manufactured in climatic versions of U and T, placement categories 1, 2 and 3 according to GOST 15150, for operation at a temperature from plus 40 to minus 40 degrees. Celsius The standard does not apply to cranes designed to work in explosive and fire hazardous environments, in rooms with vapors of acids and alkalis, the concentrations of which cause the destruction of electrical insulation for transporting loads heated above 300 degrees. Celsius and molten metal, slag, poisonous and explosives and other dangerous goods.
Стандарт распространяется на мостовые электрические однобалочные опорные краны, группы режима работы 3К по ГОСТ 25546 с электрической талью и электрической талью и электрическим механизмом передвижения, грузоподъемностью от 1 до 5 т, работающие на трехфазном токе напряжением 220, 240, 380, 400, 415 В частотой 60 Гц и напряжением 220, 380, 400, 440 В частотой 60 Гц, изготавливаемые в климатическом исполнении У и Т, категории размещения 1, 2 и 3 по ГОСТ 15150, для работы при температуре от плюс 40 до минус 40 град. Цельсия. Стандарт не распространяется на краны, предназначенные для работы во взрывоопасной и пожароопасной средах, в помещениях с парами кислот и щелочей, концентрации которых вызывают разрушение электрической изоляции, для транспортирования грузов, нагретых свыше 300 град. Цельсия и расплавленного металла, шлака, ядовитых и взрывчатых веществ и других опасных грузов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
3/28/1989
SKU: RUSS19938
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
53 Handling equipment »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.5 Lifting and rigging equipment »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
National standards »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G86 Lifting equipment »
The Document is Replaced With:
GOST 34589-2019: Hoisting cranes. Overhead and gantry cranes. General technical requirements
As a Replacement Of:
GOST 22045-82: Cranes bridge supporting single-girder with electric hoist. Type, basic parameters and dimensions
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.1.050-86: Occupational safety standards system. Methods of noise measurement at work-places
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.058-81: Requirements for color of crane components dangerous in exploitation
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.040-78: Industrial equipment controls
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12970-67: Round plates for machines and devices. Dimensions
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 19.402-78: Unified system for program documentation. Program description
GOST 22584-96: Electric rope hoists
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 25546-82: Hoisting cranes. Work conditions
GOST 2591-88: Square Hot-rolled Steel Bars Dimensions
GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3242-79: Welded joints
GOST 3325-85: Rolling bearings. Tolerance margins and technical requirements for shaft and housing seatings. Fits
GOST 3956-76: Silica gel technical. Technical conditions
GOST 534-78: Overhead traveling cranes spans
GOST 6368-82: Type R8, R11, R18 and R24 narrow-gauge railway rails. Design and dimensions
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
The Document is Referenced By:
ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)
OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.
PB 10-14-92: Codes for installation and safe operation of lifting cranes
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
RD 10-112-1-04: Recommendations for expert examination of lifting machines. General provisions
RD 10-112-6-03: Guidelines for the inspection of special metallurgical cranes
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 26-17-049-85: Organization of storage, preparation and control of welding materials
RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes
SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation
SP 43.13330.2012: Structures for industrial installations
TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
