imgalt

SNiP 2.06.01-86

СНиП 2.06.01-86

Hydraulic facilities. basic provisions of design activities

Гидротехнические сооружения. основные положения проектирования

Status: Not effective - Superseded

Building codes and regulations apply to the design of newly built, expandable and reconstructed hydraulic structures.

Строительные нормы и правила распространяются на проектирование вновь строящихся, расширяемых и реконструируемых гидротехнических сооружений.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 5/28/1986

SKU: RUSS19952

Price: $725.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 3. Normative documents on urban planning, buildings and constructions » к.33 Hydrotechnical and meliorative constructions »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 4 Safety requirements for hydraulic structures » 4.1 General requirements for ensuring safety of hydraulic structures »

PromExpert » SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE » II Ensuring environmental safety » 2 Protection and protection of surface water bodies » 2.3 Water use » 2.3.3 Requirements for use of water bodies of industrial and transport water use »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.160 Construction of hydraulic facilities »


The Document is Replaced With:

SNiP 33-01-2003: Hydraulic engineering constructions. Basic principles of designing

As a Replacement Of:

SNiP II-50-74: Waterworks river. Basic design provisions

SNiP II-51-74: Marine marine structures. Basic design provisions

The Document References:

SNiP 2.01.14-83: Determination of design hydrologic characteristics

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 2.06.15-85: Inundation & under-flooding. Area protection engineering

SNiP II-55-79: Retaining Walls, Ship Locks, Fish Ladders, and Fish Locks

The Document is Referenced By:

GOST R 22.1.11-2002: Safety in emergencies. Monitoring of water sustaining hydraulic constructions (dams) and forecasting of possible consequences of hydrodynamic accidents on them. General requirements

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 2.05.03-84: Guide to SNiP 2.05.03-84 "Bridges and pipes" for the survey and design of railway and road bridge crossings through waterways (PMP-91)

Manual for SNiP 2.06.08-87: A guide for the design of concrete and reinforced concrete structures of hydraulic structures (without prestressing)

Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities

MDS 11-16.2002: Guidelines for drafting an engineering plan for civil defense

MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures

MRR 3.2.55-13: The method of determining the cost of design work on the overhaul of reservoirs, carried out with the involvement of the budget of the city of Moscow

MRR 7.6-16: Reservoirs

ND p.4.2 SPPNAE-93: Basic Requirements for Development of Feasibility Studies for Nuclear Power Plant Construction - Ordinance on Procedure for Selection of Construction Site

P 69-97/VNIIG: Guidance on methods for assessing the life and safety of concrete and reinforced concrete structures of hydraulic structures

P 73-2000: Recommendations for field studies and ongoing monitoring of the vibration of hydraulic structures of power plants

P 75-2000: Recommendations for data analysis and monitoring of the state of the water discharge structures and downstream hydropower stations

P 79-2000: Model Guidelines for Operation of Hydraulic Structures of Electric Power Generating Stations

P 85-2001: Recommendations for data analysis and conducting field observations of stress-strain state, opening of seams and cracks in concrete and reinforced concrete structures

P 864-88: Manual for design of navigation locks to SNIP 2.06.07-87 ´Retaining walls, navigation locks, fish ladders and fish protection structures´

P 87-2001: Recommendations for the conduct of field observations of sediments of earth dams

P 89-2001: Recommendations for the diagnostic control of the filtration and hydrochemical state of ash dumps

P 92-2001: Recommendations for inspection of hydraulic structures to assess their safety

P 94-2001: Recommendations for conducting hydraulic field observations and tunnel studies

R 31.3.02-98: Recommendations for the design of marine port waterworks in seismic regions in the presence of bases on weak soil (Handbook to RD 31.31.55-93). Soyuzmorniiproekt, 1998

R 31.3.07-01: Guidelines for Calculation of Wave, Ship, and Ice Loads and Effects on Marine Hydraulic Structures

RD 09-255-99: Recommended Practice for Operating Condition Assessment and Safety of Industrial Waste Storage Facilities and of Chemical Industry Wastes

RD 153-34.2-02.409-2003: Guidelines for assessing the environmental impact of hydraulic structures

RD 153-34.2-21.342-00: Method for the Determination of Safety Criteria of Hydraulic Structures

RD 153-34.2-21.546-2003: Rules for the organization and conduct of field observations and research on dams from soil materials

RD 153-34.2-31.604-2002: Recommendations on technological issues of repair and reconstruction of the chambers of impellers of hydraulic units in order to increase their operational reliability

RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.

RD 31.3.05-97: Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997

RD 31.3.06-2000: Guide to Accounting for Seismic Effects in the Design of Maritime Hydraulic Structures of the "BOLWERK" Type

RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997

RD 31.3.4-97: Provision on organization of technical inspection of hydraulic facilities of marine transport

RD 31.31.25-85: Guidelines for Design of Wharf Structures for Arctic Conditions

RD 31.31.36-85: Recommendations for the design and technology of building protective structures by filling with a hard screen. Minmorflot. Soyuzmorniiproekt, 1965

RD 31.31.38-86: Instructions for strengthening and reconstruction of mooring facilities.

RD 31.31.43-86: Guidelines for design of slope-berth and rear coupling of embankments, bridges, subject to intense wave action. Minmorflot, Soyuzmorniiproekt, 1986

RD 31.31.44-86: Recommended Practice for Use of Used Tires for Wave Protection of Port Structures - Design and Calculation of Floating Breakwaters

RD 31.31.47-88: The design standards of marine channels. Ministry of Transport, Soyuzmorniiproekt, 1988

RD 31.31.52-89: Recommendations for the design, construction and operation of ice berthing facilities

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 31.33.07-86: Guide to Calculation of Impact of Tsunamis on Port Structures, Water Bodies, and Territories. Recommended Practice for Design

RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990

RD 34 15.073-91: Guidance on geotechnical control over preparation of grounds and erection of soil structures in power engineering

RD 34.20.161: Standards for Design of Process Section of Hydroelectric Generating Stations and Hydroelectric Pumped Storage Power Plants

RD 95.10531-96: Guidelines for the hydrological justification of feasibility studies and NPP projects

Resolution 107: Provisional Regulations on the composition of measures to prevent emergencies in the special section "Engineering and technical measures of civil defense. Measures to prevent emergencies" of urban planning documentation of Moscow

SNiP 2.01.15-90: Engineering protection of territories, buildings and structures from hazardous geological phenomenon. Principal provisions of design

SNiP 2.06.07-87: Retaining walls, ship locks, fish ways, and fish-protection devices

SNiP 2.06.08-87: Concrete and reinforced concrete structures of hydro engineering facilities

SNiP 33-01-2003: Hydraulic engineering constructions. Basic principles of designing

SP 11-107-98: Procedure of Development and Composition of the “Engineering and Technical Measures of Civil Defense. Measures for Prevention of Emergencies” Section of Construction Projects

SP 11-112-2001: The procedure for development and composition of the section "Engineering civil defence measures. Measures for the prevention of emergencies" for urban planning documentation for the areas of urban and rural settlements and other municipality subjects

SP 11-113-2002: The reporting on the engineering civil defence measures and activities to prevent emergencies in the preparation of an application of intent to invest in the construction and justification of investment in the construction of enterprises, buildings and structures

SP 32-103-97: Design of offshore protection structures

STA 25.03.02-2004: Combined security system

TSN 30-303-2000 MO: Planning and development of urban and rural settlements. Moscow region

TSN 30-305-2002: Urban planning. Reconstruction and development of non-central areas of St. Petersburg

VNTP 13-2-93: Norms of technological design of mining enterprises of metallurgy with underground mining method

VSN 07/02/34 Russian Defense Ministry: Design of fuel depots of the Ministry of Defense of the Russian Federation

VSN 33-2.2.06-86: Irrigation and Drainage Systems and Structures. Irrigation Systems on Subsiding Soils. Design Standards

VSN 33-2.2.07-86: Irrigation and Drainage Systems and Structures. Structures on Heaving Soils. Design Standards

VSN 33-2.2.12-87: Irrigation and Drainage Systems and Structures. Pumping Stations. Design Standards

VSN 34.72.111-92: Engineering Surveys for the Design of Thermal Power Plants

VSN 34-72-019-89: Designing the lining of underground machine rooms of hydroelectric power stations, PSPP and other chamber workings in hydraulic engineering construction

VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III

VSN 41.88: Design of ice-resistant stationary platforms

VSN-APK 2.30.05.001-2003: Melioration. Guidance on protection of acres violated by water-erosion. Mesh structures of soil-saving installations

VSP 33-01-99 MO RF: Instructions for the calculation and design of anchor systems for floating objects of the Navy

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
Chill moulds. Ventilation channels. Dimensions
Language: English
Price: $68.00
imgalt
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English
Price: $151.00
imgalt
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English
Price: $154.00
imgalt
Rails of types P38 and P42. Technical conditions
Language: English
Price: $109.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!