GOST 5632-72
ГОСТ 5632-72
|
|
High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
Стали высоколегированные и сплавы коррозионно-стойкие, жаростойкие и жаропрочные. Марки
Status: Partially effective through 12/31/2020. Restored on the territory of the Russian Federation for use at nuclear facilities The order of Rosstandart No. 2191-st dated 12/22/2015 (IUS 4-2016)
The standard applies to wrought steels and alloys on iron-nickel and nickel bases, designed to work in corrosive environments and at high temperatures.
Стандарт распространяется на деформируемые стали и сплавы на железоникелевой и никелевых основах, предназначенные для работы в коррозионно-активных средах и при высоких температурах.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers,
12/27/1972
SKU: RUSS19963
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Gases »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.1 Metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V30 Classification, nomenclature and general rules »
The Document is Replaced With:
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
As a Replacement Of:
GOST 5632-61: Steels and high-alloyed corrosion-resistant, heat-resistant and heat-resistant (deformable). Types
The Document References:
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium
GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium
GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 17051-82: Alloyed and high-alloyed steels. Methods for determination of tantalum
GOST 17745-90: Steels and alloys. Methods for determination of gases
GOST 24018.0-90: Nickel-based high-temperature strong alloys
GOST 24018.1-80: Nickel-based fire-resistant alloys. Methods for the determination of tin
GOST 24018.2-80: Nickel-based fire-resistant alloys. Methods for the determination of antimony
GOST 24018.3-80: Nickel-based fire-resistant alloys. Methods for the determination of lead
GOST 24018.4-80: Nickel-based fire-resistant alloys. Methods for the determination of bismuth
GOST 24018.5-80: Nickel-based fire-resistant alloys. Method for the determination of lead and bismuth
GOST 24018.6-80: Nickel-based fire-resistant alloys. Methods for the determination of arsenic
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 5632-61: Steels and high-alloyed corrosion-resistant, heat-resistant and heat-resistant (deformable). Types
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
The Document is Referenced By:
ATK 24.201.10-90: Inspection Windows for Steel Vessels and Apparatus. Types, Design, and Dimensions. Technical Requirements
ATK 24.201.17-90: Stirrers. Types, parameters, design, main dimensions and technical requirements
ATK 24.202.08-90: Ball valve valve four-flow plates for column type devices. Construction and main dimensions
ATK 24.202.12-90: Mesh bumpers made of corrugated hose. Parameters, design and main dimensions
ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications
ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
ATK 26-02-1-89: Direct-flow valve plates for column-type devices. Options. Construction and main dimensions
ATK 26-02-2-89: Four-flow straight valve plates for column-type apparatus. Options. Construction and main dimensions
ATK 26-02-3-89: Mesh plates with baffle elements for column type devices. Options. Construction and main dimensions
ATK 26-02-4-89: Trapezoid valve plates for column type apparatus. Parameters, design and main dimensions
ATK 26-18-14-98: Flanges of vessels and apparatus steel flat welded to a conditional pressure up to Ru 0.1 MPa. Design, dimensions and general technical requirements
ATK 26-18-6-93: Steel oval and octagonal gaskets for reinforcement flanges. Design. Sizes and technical requirements
AZ-926: Fan selection guide for fan systems in hazardous areas
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
GN 2.3.3.972-00: Nutrition hygiene. Package, crockery, equipment and other types of productions, contacting with food. Maximum admissible amounts (MAA) of chemical substances, emitting from materials contacting with food
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10219-77: Xenon. Specification
GOST 10238-74: Flasks with tubes
GOST 10304-80: Rivets
GOST 10378-73: Flask for treatment of gases
GOST 10421-75: Bellows locking shut-off valves for Pp approximately equal to 1 MPa (10 kgf / cm2)
GOST 10498-63: Pipes seamless extra-thin-walled from corrosion-resistant (stainless) steel. Specification
GOST 10498-82: Seamless extra thin-walled tubes of corrosion-resistant steel
GOST 10543-82: Surfacing steal wire. Specifications
GOST 10543-98: Steel surfacing wire. Specifications
GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications
GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions
GOST 10731-85: Surface-type evaporators for steam-turbine power stations
GOST 10751-85: Conducting cable paper
GOST 1077-79: Single-flame multi-purpose torches for oxy-acetylene welding, soldering and heating
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 10918-82: Micaceons plates and micaceons details. Test methods
GOST 11068-64: Tubes of stainless steel, electro welded
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 11078-78: Sodium hydrate purified. Specifications
GOST 11101-93: Air foam hoses. Specifications.
GOST 11103-85: Inorganic glass and glass crystal materials. Method for the determination of thermal stability
GOST 11306-83: Turf and products of its processing. Methods for the determination of ash content
GOST 1147-80: Wood details and articles for one-two storey dwelling and public buildings
GOST 11614-94: Semi-automatic flushing valves. Specifications
GOST 11802-66: Jet fuel. Method for determining thermal stability under static conditions
GOST 11802-88: Jet fuel method of test for determination of thermal-oxidative stability under static condition
GOST 11871-88: Slotted round nuts, product grade A. Specifications
GOST 12.1.044-84: Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indicators and methods for their determination
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances
GOST 12393-2013: Line fittings for overhead system of railways. General common requirements
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 12644-80: Hollow and semi-hollow rivets. Specifications
GOST 12783-91: Paper. Method for determining the electrical resistance coefficient
GOST 12785-77: Paper for electric capacitors. Specification
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12962-80: Medium expansion foam-making branch pipes. Specifications
GOST 13268-83: Tubular heating elements (the)
GOST 13324-78: Hard coals. Method for determination of dilatometer characteristics
GOST 13324-94: Hard coals. Method for determination of dilatometer characteristiсs Audibert-Arnu dilatometer test
GOST 13649-79: Spring lugs for the wrist watch cases. Design and sizes
GOST 13750-88: Micaceous plates for instrument-making. Specifications
GOST 13816-80: Hydrant column. Specification
GOST 14022-88: Anhydrous hydrogen fluoride
GOST 14106-80: Curing autoclaves
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 14227-85: Dish washing machines
GOST 14245-79: Heat exchangers shell-and-tube with U-shaped tubes. Basic parameters and dimensions
GOST 14256-2000: Electro-and heat insulating tapes. Specifications
GOST 14256-78: Asbestos electro-and heat insulating tapes. Specifications
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 14921-78: Liquefied hydrocarbon gases. Methods of sampling
GOST 15119-79: Shell-and-tube evaporators with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 15120-79: Shell-and-tube chillers with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 15121-79: Shell-and-tube condensers with fixed tube grids and shell-and-tube with a temperature compensator on the casing. Basic parameters and dimensions
GOST 1532-81: Viscosimeters of relative viscosity. Specifications
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)
GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications
GOST 16024-79: Cryogenic vessels. Specification
GOST 16088-70: Solid carbide machine reamers. Specifications
GOST 16339-70: Support holders for a 250 and 500 kg force rolling heads. Construction and dimensions
GOST 16340-70: Support holders for 1000 and 2000 kg force rolling heads. Construction and dimensions
GOST 16341-70: Support holder for a 4000 kg force rolling head. Construction and dimensions
GOST 16745-83: Capacity paper. Method for determining break-down voltage at alternating (frequency 50 Hz.) and direct voltage
GOST 16746-83: Capacity paper. Method for determining dielectrical power factor at frequency 50 Hz
GOST 17151-81: Cooking utensils made
GOST 17535-77: Metal high precision parts of devices. Dimension stabilisation by heat treatment. Typical technological processes
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 18123-82: Washers
GOST 18126-72: Bolts, studs and nuts with thread diameter over 48 mm. Specifications
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18143-72: Corrosion resistant
GOST 18163-72: Flanged stop valves from malleable iron for Pd approximately 2.5 and 4 MPa (25 and 40 kgf / cm2). Specification
GOST 18325-80: Laboratory furniture for operation with radioactive substances. General requirements
GOST 18372-73: Carbide end mills. Specifications
GOST 18580-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 4 MPa (40 kgf / cm2). Specification
GOST 18581-73: Check valves reverse flanged from corrosion-resistant steel to PN 4 MPa (40 kgf / cm2). Specification
GOST 18584-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 16 MPa (160 kgf / cm2). Specification
GOST 18680-73: Sealing details. General specifications
GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel
GOST 18949-73: Carbide-tipped spherical, cylindrical and conical end milling cutters for cutting hardworking steels and alloys. Technical requirements
GOST 18961-80: Diamond needles for surface roughness measurements. Technical conditions
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19126-2007: Medical metallic instruments. General specifications
GOST 19126-79: Metallic medical instruments
GOST 19192-73: The check valves, of steel flanged and welded to Pd approximately equal to 4 MPa (40 kgf / cm2). Specification
GOST 19257-73: Holes for threading metric thread. Diameters
GOST 19258-73: Bars for threading metric thread. Diameters
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19334-73: Connection parts for pipe-lines and metal-reinforced hoses. Types, basic dimensions and technical requirements
GOST 19440-74: Metal powder. Determination of bulk density
GOST 19440-94: Metallic powders. Determination of apparent density. Part 1. Funnel method. Part 2. Scott volumeter method
GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel
GOST 19500-74: Malleable iron chaklift screwed and flanged valves for Pnom 1,6 mpa (16 kgf/sq cm)
GOST 19501-74: Backward lifting and flanged valves from malleable iron for Pd 1.6 and 2.5 MPa (16 and 25 kgf / cm2). Specification
GOST 19503-88: Hydrazine hydrate technical. Technical conditions
GOST 19671-81: Tungsten wire for light sources. Specification
GOST 19671-91: Tungsten wire for light sources
GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications
GOST 19689-80: Glass-fiber thin-layered electric heaters
GOST 19755-84: Sealing metal conical gaskets for closed gates. Specifications
GOST 19782-74: Paste ВНИИ НП-225. Specifications
GOST 19814-74: Synthetic and regenerated acetic acid. Specifications
GOST 20015-88: Chloroform. Specifications
GOST 20072-74: Heat-resistant steel
GOST 20288-74: Reagents. Carbon tetrachloride. Specifications
GOST 20292-74: Laboratory volumetric glassware. Burettes, pipettes
GOST 20294-74: Acid-proof steel straightway top valves with for Pnom 1,6 mpa (16 kgf/cm2)
GOST 20549-75: Vacuum diffusion welding of working elements of separating and shape forming dies. Typical technological process
GOST 20698-75: Twist drills for hard to machine materials. Specifications
GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements
GOST 20791-88: Centrifugal glandless electric pumps
GOST 20841.2-75: Silicon organic products. Methods for determination of silicon mass fraction
GOST 20863-81: Adjusting fixturing rings supports with a flat, threaded end and hole. Design and dimensions
GOST 20866-81: Adjusting fixturing ring support with flats and threaded holes. Design and dimensions
GOST 20869-75: Rigid cellular plastics. Method for determination of water absorption
GOST 20899-75: Metal powders. Method of yield determination
GOST 20899-98: Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flow meter)
GOST 21029-75: Aluminum barrels for chemical products
GOST 21039-75: Acetic anhydride for industrial use. Specifications
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21347-75: Bars for threading pipe cylindrical thread. Diameters
GOST 21348-75: Holes for threading pipe cylindrical thread. Diameters
GOST 21349-75: Bars for threading pipe taper screw thread. Diameters
GOST 21350-75: Holes for threading pipe taper screw thread. Diameters
GOST 21482-76: Single-layer measuring metal bellows. Specifications
GOST 21519-84: Windows, balcony doors, shop-windows and stained glass panels of aluminum alloys
GOST 21528-76: Solid carbide reamers for machining corrosion-proof and heat-resisting steels and alloys. Technical requirements
GOST 21542-76: Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Specifications
GOST 21545-76: Solid carbide counterbores for machining stainless and high-temperature steels and alloys. Specifications
GOST 21557-83: The bushings and rings for metallic bellows. General specifications
GOST 2172-80: Aviation steel ropes
GOST 21744-83: Multilayer metal bellows. General specifications
GOST 21754-81: Welded metallic bellows. Specification
GOST 21963-82: Cutoff wheels
GOST 22054-76: Motor and aviation gasoline. Method for the evaluation of chemical stability
GOST 22358-87: Racing and hockey skates. General specifications
GOST 22372-77: Dielectric materials. Methods of determination of permittivity and power factor with in a frequency range of 100 to 5·10 in 6 degree Hz
GOST 22486-77: Evaporators shell-and-tube of steel for refrigeration. Type, basic parameters and dimensions
GOST 22567.12-82: Synthetic detergents. Method for determination of flowability
GOST 22567.13-82: Synthetic detergents. Method for estimation of colour
GOST 2263-79: Sodium hydroxide for industrial use. Specifications
GOST 22722-77: Tractor and combine diesel engines. Inlet and exhaust valves. General technical requirements
GOST 22742-77: Sets of square connectors fixture of radio electronic items. Specifications
GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 22814-83: Assembly Units and Pipeline Parts. Armed reducing flanges. For Pn above 10 to 40 МPа
. ( above 100 tо 400 кgf/сm2)
GOST 22816-83: Assembly units and pipeline parts. Flanged plugs with inserts for Pnom 9,81-40 MPa (100-400 kgf/sm sq). Construction and dimensions
GOST 22982-78: Electrochemical paper
GOST 23001-88: Propylene oxide technical. Specifications
GOST 23178-78: High-temperature fluoroborate and boride halogenide fluxes for soldering
GOST 23229-78: Shut-off valves made of corrosion-resistant steel for Pd 4 MPa (40 kgf / cm2). Specification
GOST 23230-78: Shut-off valves made of steel for Pd are approximately 16.0 MPa (160 kgf / cm2). Specification
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 23308-78: Radiochemical hoods. General technical requirements
GOST 23309-78: Boxes radiation-protective. General technical requirements
GOST 23410-78: Shield box viewing windows. Types, construction and dimensions
GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications
GOST 23488-79: Auxiliary compounds for textiles. Avivag K-1. Specifications
GOST 23619-79: Refractory heat-insulating mullite-silica glass-fibrous materials and products. Specifications
GOST 23626-79: Emali HV-714. Tehnicheskie usloviya
GOST 23630.1-79: Plastics. Method for the determination of thermal capacity.
GOST 23644-79: Gaseous nitrogen concentrated by stable isotope Nitrogen-15. Specifications
GOST 23705-79: Hot-rolled and forged high-temperature alloy bars
GOST 23747-79: Doors of aluminium alloys. Specifications
GOST 23747-88: Doors of aluminium alloys. Specifications
GOST 23762-79: Shell-and-tube heat exchangers for high temperatures and pressures. Basic parameters and dimensions
GOST 23844-79: Khladon 113. Specifications
GOST 23932-79: Laboratory glassware and equipment. General technical requirements
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 24018.0-90: Nickel-based high-temperature strong alloys
GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry
GOST 24156-80: Steam-eductoring sprayers. General technical requirements
GOST 2424-83: Grinding wheels
GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 24553-81: Bellows, metal, single-layer, compensatory, reinforced with rings. Specification
GOST 24788-2001: Enameled steel kitchen utensils. General specifications
GOST 24788-81: Enameled steel kitchen utensils.
GOST 24975.0-2015: Ethylene and propylene. Methods of sampling
GOST 24975.0-89: Ethylene and propylene. Method of sampling
GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys
GOST 25013-81: Electrochemical impulse paper
GOST 25046-81: Disposable injection needles
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25088-81: Ship's doors. Specifications
GOST 25088-98: Ship's doors. Specifications
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25287-82: Suspension for lubricating film formation BНИИ НП-209. Specifications
GOST 25309-94: Covers of access hatches. Specifications
GOST 25377-82: Syringe needles for repeated use
GOST 25428-82: Fluoroplast-42. Specifications
GOST 25743-83: Radiochemical hoods. Types, main characteristics and dimensions
GOST 25797-83: Products of lock and hardware for the focal elements of enclosing structures made of aluminum alloys. General specifications
GOST 26130-84: Electrical insulating paper. Methods for determination of electrical strength at alternating (frequency of 50 Hz) and constant voltage
GOST 26131-84: Heat-resisting steel forgings. General specifications
GOST 26155-84: Barrels from corrosion-resistant steel
GOST 26526-85: Vacuum equipment. Flanger joint for high vacuum system. Design, dimensions and technical requirements
GOST 26969-86: Standard orifice plates for flow meters. Specifications
GOST 27036-86: Bellows metal expansion joints and seals
GOST 27206-87: Compounds and products containing stable isotopes
GOST 27266-87: Molybdenum wire for light sources
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 27702-88: Steel and alloys. Unified grades
GOST 2787-75: Recycled ferrous metals
GOST 28019-89: Adhesive tape for electrical insulation. Test methods
GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination
GOST 2824-86: Electric insulating cardboard
GOST 28679-90: Steam-water heaters for heat supply systems
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 28919-91: Flange connections of wellhead equipment. Types, basic parameters and dimensions
GOST 28970-91: Polymer protective coatings for insulation, localization, deactivation, improving, radioactivity situation in radiation protected rooms and box-like premises. Technological requirements
GOST 29287-92: Sodium hydroxide for industrial use. Sampling. Test sample. Preparation the main solution for testing
GOST 30208-94: Surgical instruments. Metallic materials. Part 1. Stainless steel
GOST 30482-97: Electroslag welding of steels. Requirements for technological process
GOST 30648.1-99: Infant milk products. Methods for determination of fat
GOST 30765-2001: Metal transport packagings. General specifications
GOST 30872-2002: Air cooling machines. General specifications
GOST 30894-2003: Production well head equipment. General technical requirements
GOST 31173-2003: Steel doors. Specifications
GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.
GOST 31370-2008: Natural gas. Sampling guidelines
GOST 31371.3-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 3. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
GOST 31521-2012: Food рrocessing machinery. Сutting machines for meat. Specifications
GOST 31522-2012: Food processing machinery. Dough and pastry brakes. Specifications
GOST 31523-2012: Food processing machinery. Dough mixers. Specifications
GOST 31524-2012: Food processing machinery. Moulders. Specifications
GOST 31525-2012: Food processing machinery. Band saw machines. Specifications
GOST 31526-2012: Food processing machinery. Circular saw machines. Specifications
GOST 31527-2012: Food processing machinery. Intermediate provers. Specifications
GOST 31577-2012: Dental metallic prostheses with protective coatings. Specifications
GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications
GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 32405-2013: Solid hardmetal end mills. Specifications
GOST 32504-2013: Petroleum and natural gas industries. Downhole equipment. Sand screens liquid centrifugal separators. General technical requirements
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications
GOST 32584-2013: Steel enameled ovenware with anti-burn coating. Specifications
GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements
GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications
GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST 356-68: Pressure - conditional, testing and working for valves and connecting parts of pipelines
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 3575-75: Hoses flexible metal hermetic with a movable seam
GOST 3608-78: Rings for ring spinning and ring doubling frames. Specifications
GOST 397-79: Split pins
GOST 4624-70: Equipment for horizontal tanks for petroleum products. Ventilating tip
GOST 4-84: Carbon tetrachloride for industrial use. Specifications
GOST 4860.1-83: Glands for for electric cables and wires
GOST 4861-74: Plates of peat, heat-insulating
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 5152-84: Gland Packing Specifications
GOST 5191-79: Injector cutting torches for manual oxygen cutting
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 538-88: Lock and building hardware
GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5735-81: Carbide tipped machine reamers. Specifications
GOST 5890-78: Pipe connection with screwed ends. Specifications
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5984-80: Explosives. Methods for determination of brisance
GOST 5984-99: Explosives. Methods for determination of brisance
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 667-73: Battery sulphuric acid. Specifications
GOST 6859-72: Apparatus for liquids sampling and measuring. Specifications
GOST 6927-74: Slabs of concrete for wall facing. Technical requirements
GOST 6948-81: Foaming agent PО-1Specifications
GOST 6968-76: Acetic acid produced
GOST 7119-77: Phthalic anhydride for industrial use. Specifications
GOST 7183-93: Foam mixers. Specifications.
GOST 7328-82: General-purpose and reference mass gages
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7568-88: Ethylene oxide. Specifications
GOST 7934.1-74: Watch oils and greases. Method for the determination of evaporability
GOST 8.140-82: State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring heat conductivity of solid bodies in the range of 0,1 to 5 W/(m·K) at temperatures from 90 to 500 K and in the range from 5 to 20 W/(m·K) at temperatures from 300 to 1100 K
GOST 8050-85: Carbon dioxide,
GOST 8117-74: Ship's bells. Specifications
GOST 8220-62: Underground fire hydrants
GOST 8220-85: Underground fire hydrants. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST 8775.1-87: Lithium. Methods for determination of lithium
GOST 8775.3-87: Lithium. Method for determination of magnesium, manganese, iron, aluminium, silicon, barium
GOST 9.047-75: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production
GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production
GOST 9.309-86: Unified system of corrosion and ageing protection. Galvanic coating. Designation of dispersing ability of electrolytes during the creation of coverings
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9.512-96: Unified system of corrosion and ageing protection. Means of temporary corrosion protection. Method of determining protection ability of lubricants against fretting corrosion
GOST 9.704-80: Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing
GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications
GOST 9132-75: Safety valves lever-load, flanged of steel for Pd 2,5 MPa (25 kgf / cm2). Types and basic dimensions
GOST 9218-70: Tank trucks for milk and other food liquids. Types, parameters and technical requirements
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9509-74: Scales and dosimeters. Knife-edges and bearings of steel. General requirements
GOST 9521-74: Coals. Method for the determination of coking property
GOST 9634-81: Steel caps
GOST 9650-80: Pins. Specifications
GOST 9652-68: Shutoff Devices of level indicators of liquids for Pd up to 40 kgf / cm2. Specification
GOST 9789-75: Safety spring full-lifted flanged steel valves for p stip "1.6 and 4.0 MPa (16 and 40 kgf/cm2)
GOST 982-80: Transformer oils
GOST 9916-77: Oil coolers for stationary steam and gas turbines. Specification
GOST 9940-72: Seamless hot deformed tubes made of corrosion resistant steel
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST 9968-86: Methylene dichloride technical. Specifications
GOST R 50291-92: 1,1,2,2,-tetrafluorodibromethane (Khladon 114B2). Specifications
GOST R 50328.1-92: Surgical instruments. Metallic materials. Part 1. Stainless steel
GOST R 50392-92: Fittings for metal bellows expansion joints and seals. Types, main parameters and dimensions. General specifications
GOST R 50399-92: Air-foam nozzles. Specifications
GOST R 50408-92: Foam mixers. Specifications
GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications
GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50618-93: Metal single layer bellows for compensation. Types, general specifications
GOST R 50619-93: Metal multylevels bellows for compensation. Types, general requirements
GOST R 50773-95: Polymer protective coatings for the improvement of radioactive situation. Methods used to determine the decontamination coefficient and time of protective action
GOST R 50803-2008: Food processing machinery. Tanks for cooling and storage of milk in milk-trade farms and reception stations. Technical requirements and safety parameters
GOST R 50803-95: Refrigerated bulk milk tanks. General requirements
GOST R 51015-97: Blades for household and special use. General specifications
GOST R 51058-97: Dental metallic prostheses with protective coatings. Specifications
GOST R 51063-97: Inert powder. Methods of testing
GOST R 51242-98: Mechanical protective constructions and electromechanical protective constructions for doorways and windows ventings. Technical requirements and test methods for breaking resistance
GOST R 51268-99: Scissors. General specifications
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking
GOST R 51393-99: Corrosion-resistant steel cold rolled sheets and decks cold-shaped sections for carriage building. Specifications
GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications
GOST R 51571-2000: Metal bellows expansion joints and seals. General technical requirements
GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications
GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications
GOST R 51690-2000: Passenger cars of 1520 mm gauge mainline railways track. General specifications
GOST R 51802-2001: Aggressive and other special media stability test methods for machines, instruments and other industrial products
GOST R 52116-2003: Utensils of cast-iron. General specifications
GOST R 52133-2003: Fireplaces for residential and public buildings. General specifications
GOST R 52153-2003: Radiation-protective boxes. General specifications
GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods
GOST R 52223-2004: Steel enamelled ovenware with anti-burn coating. Specifications
GOST R 52338-2005: Industrial cleanliness. Methods for lubricating and cooling liquids testing
GOST R 52603-2011: Water attractions. Safety of structure. General requirements
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods
GOST R 52780-2007: Hardmetal burrs. Specifications
GOST R 52802-2007: Pelletized nickel-base superalloys. Grades
GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints
GOST R 53140-2008: Food processing machinery. Intermediate provers. Specifications
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 53280.3-2009: Automatic fire extinguishing systems. Fire extinguishing media. Part 3. Gaseous extinguishing media. Test methods
GOST R 53284-2009: Fire engineering. Generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53285-2009: Fire engineering. Portable generators of extinguishing aerosol. General technical requirements. Test methods
GOST R 53288-2009: Automatic water and foam extinguishers systems. Automatic fire water mist spray extinguishers systems. Modules. General technical requirements. Test methods
GOST R 53323-2009: Flame arrestors and spark arrestors. General technical requirements. Test methods
GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 53370-2009: Removable protective polymeric covering for radiation protective rooms and box-like premises. Improvement of radioactivity situation. Technological requirements
GOST R 53473-2009: Food processing machinery. Moulders Specifications
GOST R 53474-2009: Food processing machinery. Band saw machines. Specifications
GOST R 53475-2009: Food processing machinery. Circular saw machines. Specifications
GOST R 53476-2009: Food processing machinery. Cutting machines for meat. Specifications
GOST R 53477-2009: Food processing machinery. Dough and pastry brakes. Specifications
GOST R 53478-2009: Food processing machinery. Dough mixers. Specifications
GOST R 53561-2009: Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
GOST R 53617-2009: Carbon brushes for electrical machines. Construction. Types and dimensions
GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 53686-2009: Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metal
GOST R 53763-2009: Natural combustible gases. Determination of water dew point temperature
GOST R 53810-2010: Automobile engines. Valves. Technical requirements and test methods
GOST R 53895-2010: Food processing machinery. Mincing machines. Safety and hygiene requirements
GOST R 53896-2010: Food processing machinery. Pasta processing dryers and coolers. Safety and hygiene requirements
GOST R 53942-2010: Food processing machinery. Clipping machines. Safety and hygiene requirements
GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods
GOST R 54154-2010: Sanitary ware made from metal for children and teenagers. Specifications
GOST R 54155-2010: Enamelled steel kitchen utensils for children and teenagers. Specifications
GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications
GOST R 54320-2011: Food processing machinery. Rotary rack ovens. Safety and hygiene requirements
GOST R 54321-2011: Food processing machinery. Centrifugal machines for processing edible oils and fats. Safety and hygiene requirements
GOST R 54387-2011: Food processing machinery. Dеrinding, skinning and membrane removal machines. Safety and hygiene requirements
GOST R 54388-2011: Food processing machinery. Pie and tart machines. Safety and hygiene requirements
GOST R 54407-2011: Orthopaedic shoe. General technical specifications
GOST R 54423-2011: Food processing machinery. Food processors and blenders. Safety and hygiene requirements
GOST R 54424-2011: Food processing machinery. Vegetable peelers. Safety and hygiene requirements
GOST R 54425-2011: Food processing machinery. Beam mixers. Safety and hygiene requirements
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking
GOST R 54574-2011: Steel drums for paint materials. Specifications
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
GOST R 54967-2012: Food processing machinery and equipment. Сutters. Safety and hygiene requirements
GOST R 54968-2012: Food processing machinery. Mixing machines. Safety and hygiene requirements
GOST R 54969-2012: Food processing machinery and equipment. Equipment for pasta pressing. Safety and hygiene requirements
GOST R 54970-2012: Food processing machinery. Centrifugal devices for drying vegetables and fruits. Safety and hygiene requirements
GOST R 54971-2012: Food processing machinery. Spreaders, stripping and cutting machines, stick return conveyors, stick magazines. Safety and hygiene requirements
GOST R 54972-2012: Food processing machinery and equipment. Filling machines and auxiliary machines. Safety and hygiene requirements
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications
GOST R 55064-2012: Sodium hydroxide for industrial use. Specifications
GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties
GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements
GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements
GOST R 55738-2013: Studs and ceramic ferrules for stud welding
GOST R 55982-2014: Acid acetic for the food industry. Specifications
GOST R 56687-2015: Protection of concrete and reinforced-concrete construction from corrosion. Test method of sulphate resistance of concrete
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
GOST R 9.413-2007: Unified system of corrosion and ageing protection. Paint coatings. Penetrability determination of water-thinned paints at electrodeposition
GOST R EN 1834-1-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 1. Group II engines for use in flammable gas and vapour atmospheres
GOST R EN 1834-2-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 2. Group I engines for use in underground workings susceptible to fired amp and/or combustible dust
GOST R EN 1834-3-2010: Reciprocating internal combustion engines. Safety requirements for engines, intended for use in potentially explosive atmospheres. Part 3. Group III engines for use in flammable dust atmospheres
GOST R ISO 10396-2012: Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
GOST R ISO 11338-1-2008: Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Part 1. Sampling
GOST R ISO 8319-2-2006: Orthopaedic instruments. Drive connections. Part 2. Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
IM 14-1-2004: Automation tools. Instruments for measuring and regulating the level. Directory
IM 14-12-2004: Automation. Instruments for measuring and regulating pressure and vacuum. Nomenclature directory
IM 14-18-2005: Automation. Instruments for measuring and controlling the composition and properties of substances. Directory
IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
KPO 01.05.12-05: Catalog-list of equipment. Boiler equipment. Volume 2
KPO 01.05.12-05: Catalog-list of equipment. Boiler equipment. Volume 2
Manual for SNiP 2.03.04-84: A guide for the design of concrete and reinforced concrete structures designed to work in conditions of exposure to elevated and high temperatures
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.06.15-85: Flood forecasts and calculation of drainage systems in built-up and built-up areas
Manual to SN 527-80: Manual to SN 527-80. On the strength design of the technological steel pipelines at Py up to 10 Mpa
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MI 130-77: Certification procedure for installations for determining specific heat and specific enthalpy of solids and materials
MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices
MR 2.6.1.0064-12: Radiation monitoring of drinking water using radiochemical analysis methods
NPB 254-99: Flame arrestors and spark arrestors. General technical requirements. Test methods.
NPB 304-2001: Foam fire extinguishing concentrates. General technical requirements and test methods
NPB 51-96: Gaseous Fire Extinguishing Agents. General Technical Requirements for Fire Safety and Test Methods
NPB 60-97: Fire engineering. Generators of extinguishing aerosol. General technical requirements. Test methods
NPB 73-98: Fire engineering. Generators of extinguishing aerosol of operative application. General technical requirements. Test methods
NPB 80-99: Automatic fire water mist spray extinguishing systems. modules. General technical requirements. Test methods
NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials
ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)
ODM 218.7.002-2008: Guidelines for determining the needle penetration depth for viscous oil road bitumen
OST 108.004.109-80: Welded joint seams of CHP plant power equipment. Magnetic-particle control method.
OST 108.021.04-78: Steam Stationary Turbines. Welded diaphragms. Guide vanes. General specifications.
OST 108.030.04-75: Stationery steam boilers. Devices for sampling of steam and water. Types, design and dimensions. Technical requirements
OST 108.030.45-82: Tubular air heaters for stationary boilers. General Specifications.
OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.
OST 108.210.01-86: Diaphragms of stationary steam turbines. Calculation of static strength.
OST 108.386.03-80: Packings for nuclear thermal power plant pipeline clamp units. Design and dimensions.
OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.
OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.
OST 24.030.10: Vessels and apparatus for water treatment plants. General technical conditions
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
OST 24.125.02-89: Welded butt joints of npp pipelines. Types and basic dimensions
OST 24.125.13-89: Forged Straight tees for pipes and nuclear power plants. Design and dimensions.
OST 24.125.14-89: forged Transitional Tees for NPP pipelines. Design and dimensions.
OST 24.125.15-89: Stamped straight Tees for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.16-89: Stamped reducing Tees for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.17-89: Stamped straight Tees with extended neck for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.18-89: Stamped reducing Tees with extended neck for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.20-89: Units with diaphragms for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.125.22-89: Lobes for pipelines of nuclear thermal power plant. Design and dimensions.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 24.940.01-90: Welded steel structures. General technical requirements.
OST 24.940.09-74: Welded joint seams. Main types and design elements.
OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.
OST 26.260.454-99: Spiral wound gasket. Types and dimensions. General specifications.
OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.
OST 26.260.461-99: Steel packings of oval and octangular sections for fitting flanges. Design, dimensions and general specifications.
OST 26.260.472-2000: devices for installation of pressure gauges and pressure selection. General technical requirements.
OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-1159-75: Pipe input-outputs of steel welded containers and devices. Technical requirements.
OST 26-01-1242-75: Shaft seals for apparatuses with mixing devices. Hydraulic locks. Parameters, Design and main Dimensions. Technical requirements .
OST 26-01-1243-75: Seals for end apparatus with mixing devices. Types, parameters, design and main dimensions. Technical requirements
OST 26-01-1247-75: Shaft seals for apparatuses with mixing devices. Stuffing box Seals. Parameters, Design and main Dimensions. Technical requirements.
OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.
OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.
OST 26-01-144-81: Studs, nuts, washers, threaded sockets, protective caps for vessels and apparatus for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). General technical requirements. Acceptance rules. Test methods. Marking.
OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements
OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.
OST 26-01-66-86: cap trays for steel columns. Parameters, design and dimensions.
OST 26-01-82-77: Welding in chemical mechanical engineering. Main provisions and technology.
OST 26-01-86-88: fixed metal seals for vessels and apparatus for pressure over 10 to 100 MPa (100 to 1000 kgf / cm2). Types. Design and dimensions. Technical requirements . Acceptance rules. Control methods.
OST 26-02-1402-76: straight-flow, four-stream valve plates for columns. Parameters, design and basic dimensions.
OST 26-02-535-78: Piston oil pumps with electric drive and regulated supply
OST 26-02-757-79: Ladders. Design, dimensions and specifications.
OST 26-02-910-80: Condensate expanders. Specifications
OST 26-04-1035-74: Assembling units and fastening details of cold pipelines with a diameter from 100 to 1020 mm. Design and dimensions.
OST 26-04-1216-75: Cryogenic pipelines. Parts of disk supports. Design and dimensions.
OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.
OST 26-04-1250-75: Ranks of pipes for pipelines.
OST 26-04-1333-75: Straight welded stainless elbows. Design and dimensions.
OST 26-04-1335-75: welded straight stainless steel tees. Design and dimensions.
OST 26-04-1337-75: Welded straight stainless steel four-way crosses. Design and dimensions.
OST 26-04-2387-79: Steel plugs to test vessels and apparatus for Py 0.1 MPa (1 kg/cm2), Py 0.6 MPa (6 kg/cm2). Design and dimensions.
OST 26-04-538-79: Air separation plants. General requirements for assembly
OST 26-07-1232-87: General engineering pipeline fittings. Running thread pairs. Main dimensions. Technical requirements.
OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.
OST 26-07-2024-80: Distinguishing plates. Dimensions. Technical requirements.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 26-07-2029-81: Boss assembly and valve hand levels. Construction and basic dimensions. Technical requirements.
OST 26-07-2054-83: Pipeline fittings. Building up sealing surfaces of details with УОНИ-13/Н1-БК grade electrodes. Technical requirements.
OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).
OST 26-1111-74: Plates TSK-RC, TSK-RB for column apparatus. Parameters, design and dimensions
OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.
OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements
OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.
OST 26-705-79: Plates ТСН ТСН-2 and-3 of columns. Design and dimensions.
OST 26-805-73: Perforated plates of column apparatus. Type and parameters. Design and dimensions.
OST 26-845-73: Flange connections valves and piping. Steel Gaskets oval and of octagonal cross-section. Design and dimensions.
OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.
OST 34-10-416-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Pipe grades.
OST 34-10-417-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Butt-welded joints and corners. Types and sizes.
OST 34-10-423-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Turned transits. Construction and dimensions.
OST 34-10-425-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges. Construction and dimensions.
OST 34-10-426-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges to webbings. Construction and dimensions.
OST 34-10-428-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flanged plugs with a joggle. Construction and dimensions.
OST 34-10-432-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Internal flush-jointed drilled tees. Construction and dimensions.
OST 34-10-433-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Transitional tees with a reinforced fitting. Construction and dimensions.
OST 34-10-439-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Fitting. Construction and dimensions.
OST 34-10-511-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Transitional welded tees.
OST 34-10-512-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Internal flush-jointed welded tees with a cover plate.
OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-42-505-80: Details and components of APP pipelines, P≤4 MPa (40 kg/cm2). Welded connections for orifice plates, Dy from 50 to 125 mm. Construction and dimensions.
OST 34-42-506-80: Details and components of APP pipelines, P≤4 MPa (40 kg/cm2). Welded connections for orifice plates, Dy from 150 to 1200 mm. Construction and dimensions.
OST 34-42-507-80: Details and components of APP pipelines, P≤4 MPa (40 kg/cm2). Technical requirements.
OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.
OST 34-42-836-86: Flat Flanges for pipes of TPP and NPP. Design and dimensions.
OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
OST 95.901-81: Details of pipeline fittings and pipeline connections. Selected devices for control and measuring devices on PN up to 25 MPa (250 kg / cm2). Direct weld-on lugs. Types and basic dimensions
OST 95.902-81: Parts of pipeline fittings and pipeline connections. Selective devices for instrumentation on Ru to 25 MPa (250kgs
OST 95-10-72: Billets made of corrosion-resistant steels of 12Х13, 20Х13, 30Х13, 40Х13, 95Х18, 14Х17Н2, 07Х16Н4Б and 07Х16Н4Б-Ш types.
OST 95-29-72: Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
PND F 12.1.1-99: Guidelines for sampling in determining the concentration of harmful substances (gases and vapors) in industrial emissions.
PNST 226-2017: Aviation equipment. Hydraulic system. Assembly, installation and torque for flareless and straight thread fluid fittings and tube assemblies
PNST 3-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of needle penetration
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
R 4.054.004-89: Details from alloys of ferrous and non-ferrous metals. Thermal and chemical-thermal treatment. Typical Processes
R 4.054.103-89: Instrument parts are precision metal. Stabilization of sizes by heat treatment. Typical Processes
R 585-85: Recommendations for the design of gas pipelines transporting cooled gas
RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 153-34.0-37.411-2001: Procedural Guidelines for In-Service Steam-Oxygen Cleaning and Passivation of Inner Surfaces of Power Generating Equipment
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-34.1-17.424-2001: Procedural Guidelines for Investigation of Causes of Damage to Steam Turbine Rotor Components
RD 153-34.1-39.603-99: Fittings repair manual of high parameters.
RD 153-34.1-43.212-2000: Fire and mineral turbine oils. Method for determining auto-ignition temperature
RD 24.031.121-2007: Equipment of steam land-type boilers with devices for vapour and water sampling.
RD 24.031.121-2012: Equipping steam stationary boilers with devices for sampling steam and water
RD 24.031.121-91: Guidelines for equipping of stationary steam boilers with vapor and water sampling devices
RD 24.206-04-90: Pump shaft seals. Classification and symbols.
RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.
RD 26-01-28-86: Pipelines and high-pressure apparatus for ammonia and methanol production. Steel grades. Terms of use
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 26-07-266-86: Pipe fittings. Fixed connections with conical gasket. Design and dimensions
RD 26-15-88: Vessels and apparatus. Norms and methods of strength and tightness calculation for flanged joints.
RD 26-17-78-87: Pulsed-arc welding of chemical oil equipment from stainless steels with a consumable electrode in argon
RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements
RD 31.00.89-86: A station for the preparation of drinking water from a marine outboard. Design rules and regulations
RD 31.55.01.02-80: Spare parts for marine diesel engines of foreign construction. Bearing shells. Technical requirements
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.02.310-89: Method for Tests of Atmospheric Steam Discharge Noise Silencers
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations
RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm
RD 34.40.102: Procedural Guidelines for Design of Water Heat Treatment Units at Thermal Power Stations
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 50-460-84: Guidelines. Ensuring the durability of products. Method for experimental evaluation of plasticity of the surface layers of machine parts
RD 50-9.645-87: Guidelines. General requirements for the selection of metals and alloys used without coatings in atmospheric conditions
RD 95 10366-89: Deactivating formulations. Methods for determining quality indicators
RD OP.42-001-85: Main provisions for welding and control of the NPP tanks (reservoirs)
RD RTM 26-07-233-79: Surfacing pipe fitting details sealing surfaces with 06Х20Н10М3Д3С4 type material.
RD RTM 26-07-241-79: Surfacing of sealing surfaces of pipeline fittings with monel metal
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution: Rules for the design and safe operation of steam and hot water boilers
RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95
RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RST RSFSR 605-89: Folding knives. General technical conditions
RTM 108.020.126-80: Method of calculation and design of oil coolers for oil supply systems of turbine units
RTM 108.020.33-86: Labyrinth packings of stationary steam and gas turbines and compressors. Design and calculation
RTM 108.022.106-86: Gas turbine plants. Strength calculation of discs and rotors
RTM 108.030.12-82: Stationary steam boilers supercritical pressure. Feedwater and steam quality standards
RTM 108.132.02-81: Stationary High-Pressure Steam Boilers with Natural Circulation. Feed Water and Steam Quality Standards
RTM 24.020.33-75: Stationary steam and gas turbines, compressors. Labyrinth seals, type selection and leakage calculation
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
RTM 26-07-141-73: Details of pipe valves. Heat treatment of billets made of carbon and alloyed structural steels.
RTM 26-07-174-74: Thermal Calculation of Non-Insulated Pipe Fittings for Low-Temperature Media
RTM 38.001-94: Guidelines for the calculation of strength and vibration of technologically steel pipe.
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
Safety Guide: Recommendations on arrangement and safe operation of process pipelines
Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products
SN 482-76: Instructions for the design of concrete and reinforced concrete structures designed to work in conditions of exposure to elevated and high temperatures
SNiP 2.03.04-84: Concrete and reinforced concrete structures designed to operate under elevated and high temperatures
SNiP III-34-74: Automation Systems
SO 153-34.17.448-2003: Instructions for extending service life period of core element metal in turbines and compressors of power gas turbine plants.
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods
ST TsKBA 002-2003: Pipe fittings. Latches. The method of force calculation
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts
ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions
ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements
ST TsKBA 067-2008: Pipe fittings. Spiral-wound heat-resistant gaskets for body-to-lid connections. Types, main dimensions and technical requirements
ST TsKBA 068-2008: Pipe fittings. Shut-off valves with metal-to-metal seal. Technical requirements
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
ST TsKBA 074-2009: Pipe fittings. Hubs and valve handles. Design, dimensions and specifications
ST TsKBA 076-2009: Pipe fittings. Distinctive signs. Types, sizes and specifications
ST TsKBA 093-2010: Pipe fittings. Fixed connections with conical gasket. Design and dimensions
ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements
ST TsKBA 110-2013: Pipe fittings. Gland with a fusible metal seal. Designs and main dimensions. Technical requirements
ST TsKBA 111-2014: Pipe fittings. Gaskets with low-melting filler. Construction, main dimensions, manufacturing technology
STB 813-93: Scissors. General specifications
STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TSN 31-332-2006: Residential and public high-rise buildings
TU 108.11.853-87: Procurement of parts from purchased long products
TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T
TU 14-3-1109-82: Seamless cold and heat deformed pipes made of stainless steel
TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions
TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions
TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel
TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing
TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions
TU 26-02-1158-95: Horizontal air coolers
TU 301-05-17-89: Fluoroplast-40
TU 3-1002-77: Corrosion-resistant high-strength spring wire
TU 3-120-81: Expansion Bellows, Axial , Loaded. Technical Specifications
TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair
TU 34-38-20189-94: Gas-oil burners for steam stationary boilers. Technical conditions for major repairs
TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs
TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs
TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs
TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair
TU 3612-013-00220302-99: Shell-and-tube heat exchangers for special purposes. Evaporators with steam space and tube bundles to them
TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 36-1686-82: Bends are steeply curved with an angle of 90 degrees from steel grades 15X5M, 08X18NIOT, 12X18NIOT and 10X17H13M2T seamless welded on the Rou is less than 10 MPa
TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications
TU 5728-006-93978201-2008: Sealing gaskets made of thermally expanded graphite (PUTG). Technical conditions
TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 18-73/Gosgrazhdanstroy: Temporary guidelines for the design and use of aluminum structures in civil engineering. Walling
VSN 315-80: Manual to design heat units liners for oil refining industry made of light refractory concrete and heat insulating materials.
VSN 329-78: Occupational Safety Guidelines for Installation and Adjustment of Control Equipment and Automation Systems
VSN 350-75: Standard Dimensions and Properties for Pipes Used in Process Piping Systems Made of Alloy and High-Alloy Steel and Operating at Nominal Pressure Less Than or Equal to 100 kgf per sq. cm
VSN 412-80: Guidelines for Lining of Thermoelectric Generators by Shotcreting
VSN 429-81/MMSS SSSR: Instruction for the design of lining for the industrial furnaces, made of refractory fibrous materials
VSN 50-83: Design Guidelines for Piping for Liquid Products of Air Separation
Customers Who Viewed This Item Also Viewed:
|
Potassium chloride
Language: English |
Controllers acting without
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.