Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
Инструкция по устройству покрытий и оснований из щебеночных, гравийных и песчаных материалов, обработанных органическими вяжущими
Status: Effective
The instruction is intended to guide the design and construction of pavements and foundations made of stone materials, treated with organic binders in the methods of impregnation, blending on the road and black gravel, as well as layers of wear by the method of surface impregnation.
Инструкция предназначена для руководства при проектировании и строительстве дорожных покрытий и оснований из каменных материалов, обработанных органическими вяжущими по способам пропитки, смешения на дороге, и из черного щебня, а также слоев износа по способу поверхностной пропитки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Transport of the USSR,
3/22/1977
SKU: RUSS19968
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.3 Asphalt pavements (and others using bitumen, tar and mastic gum) »
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.4 Crushed stone and gravel pavements and substrates »
Highways (Max) »
Design, construction, repair and maintenance of roads »
25. Road pavement »
25.5 Coatings and bases of stabilized soil and materials. Use of industrial waste in road construction »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of roads »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.10 Road construction »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
As a Replacement Of:
VSN 123-65: Instructions for the installation of coatings and bases of crushed stone (gravel), treated with organic binders
The Document References:
GOST 10260-74: Crushed stone and gravel for construction works
GOST 10565-75: Glass vessels for laboratory use
GOST 11501-73: Bitumens. Method for determination of depth of penetrometer needle penetratio
GOST 11501-78: Petroleum bitumen. Method for determination of depth of penetrometer needle penetration
GOST 11502-65: Bitumen. Method for determination of absolute viscosity in a rotational viscometer
GOST 11503-65: Petroleum bitumen. Method for the determination of viscosity
GOST 11503-74: Petroleum bitumen. Method for the determination of viscosity
GOST 11504-73: Petroleum bitumen. Method for determination of diluent quality vaporized from liquid bitumen
GOST 11505-65: Bitumens. Method for determination of ductility
GOST 11506-65: Bitumens. Determination of the softening point
GOST 11506-73: Petroleum bitumen. The method of the determination of softening point by ring and ball
GOST 11507-65: Bitumen. Method for determining the temperature of brittleness
GOST 11507-78: Petroleum bitumen. Method for determination of brittle point
GOST 11510-65: Bitumens. Method of determining the content of water-soluble compounds
GOST 11512-65: Petroleum bitumen. Method for determination of ash content
GOST 11955-74: Bitumen petroleum for road, liquid
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12801-71: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Methods of tests
GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods
GOST 1461-59: Petroleum products. Method for determination of ash
GOST 1461-75: Petroleum and petroleum products. Method of ash test
GOST 17060-71: Mixtures bituminous (hot, warm, cold) for roads and airfields. Specification
GOST 22245-76: Viscous petroleum road bitumens. Specification
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 2477-44: Petroleum products. Quantitative determination of water content
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 2770-74: Goal-tar oil for wood impregnation. Specifications
GOST 3344-73: Crushed slag from steel blast furnace for road construction
GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications
GOST 4333-48: Oils and dark oil products. Methods for determination of flash and ignition points in open crucible
GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible
GOST 4641-74: Carboniferous tar for road construction
GOST 4641-80: Сoal tars for road constructions
GOST 4753-68: Lamp oil. Specification
GOST 4806-66: Shale fuel oil. Technical requirements
GOST 4806-79: Shale oil fuel. Specifications
GOST 8267-75: Crushed stone made from natural stone for construction works
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8268-74: Gravel for construction work
GOST 8268-82: Gravel for construction work
GOST 8269-64: Crushed stone from natural stone, gravel and crushed stone from gravel for construction works. Methods of tests
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
GOST 8735-65: Sand for construction work. Methods of tests
GOST 8735-75: Sand for construction work. Methods of tests
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-67: Sand for construction work. General requirements
GOST 8736-93: Sand for construction works. Specifications
SN 245-71: Sanitary standards for the design of industrial enterprises
SNiP III-D.5-73: Car roads. Rules of production and acceptance of work. Commissioning
VSN 115-75: Technical Guidelines for the Preparation and Application of Road Emulsions
The Document is Referenced By:
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODN 218.3.039-2003: Reinforcement of Road and Highway Shoulders
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
TU 35-1669-88: Divynylstyrene-Based Bituminous Polymer Binders and Polymer Asphalt Concrete
VNTP 37-86: Standards for technological design of non-ferrous metallurgy mines with underground mining
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Vegetable oils. General technical requirements
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.