GOST 2582-81
ГОСТ 2582-81
|
|
Electric rotatory traction machines
Машины электрические вращающиеся тяговые
Status: Restored in the Russian Federation for individual industries. By order of the Federal Agency for Technical Regulation and Metrology dated 01.03.2016 No. 101-st, it was restored on the territory of the Russian Federation only in relation to products delivered under the State Defense Order; IUS 6-2016
The standard applies to traction rotating electric machines: traction motors of direct and pulsating current; traction and auxiliary generators of direct and alternating current; DC and AC motors with a capacity of 300 W and more, including phase splitters, designed to drive auxiliary machinery and mechanisms, used on the rolling stock of main, shunting and urban rail and trackless vehicles and manufactured for the needs of the national economy and export. The standard does not apply to electric machines of accumulator loading and unloading machines, electric tractors and electric carts, as well as electric machines used in thermal electric transportation systems.
Стандарт распространяется на тяговые вращающиеся электрические машины: тяговые двигатели постоянного и пульсирующего тока; тяговые и вспомогательные генераторы постоянного и переменного тока; двигатели постоянного и переменного тока мощностью 300 Вт и более, в том числе расщепители фаз, предназначенные для привода вспомогательных машин и механизмов, применяемые на подвижном составе магистрального, маневрового и городского рельсового и безрельсового транспорта и изготовляемые для нужд народного хозяйства и экспорта. Стандарт не распространяется на электрические машины аккумуляторных погрузочно-разгрузочных машин, электротягачей и электротележек, а также на электрические машины, применяемые в теплоэлектрических автотранспортных системах.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
5/26/1981
SKU: RUSS19972
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.01 Machines rotating in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.160 Electric rotating machines »
29.160.01 Machines rotating in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E6 Electric machines, transformers and converters »
E60 Classification, nomenclature and general rules »
The Document is Replaced With:
GOST 2582-2013: Rotating electrical traction machines for rail and road vehicles. General technical specifications.
As a Replacement Of:
GOST 2582-72: Rotating electrical traction machines for rail and road vehicles. General technical specifications
The Document References:
GOST 10159-79: Rotating electrical commutator machines. Test methods
GOST 10169-77: 3-phase synchronous machines. Test methods
GOST 11828-86: Rotating electrical machines. General test methods
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 12.2.056-81: Occupational safety standards system. Electric and diesel locomotives for 1520 mm gauge. Safety requirements
GOST 12259-75: Electric machines. Methods of determination of cooling gas volume
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 13837-79: General purpose dynamometers
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability
GOST 15543-70: Electrical articles. Applications for different climatic regions. General technical requirements as to environment climatic aspects influence
GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance
GOST 16962.2-90: Electrotechnical product
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 18311-80: Electrical products. Terms and definitions of basic concepts
GOST 183-74: Rotating electrical machines
GOST 19350-74: Electrical equipment of electric rolling stock. Terms and definitions
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 20815-93: Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of the vibration severity
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 23875-88: Quality of electric energy. Terms and definitions
GOST 25941-83: Rotating electrical machines. Methods for determining losses and efficiency
GOST 26772-85: Rotating electrical machines. Terminal markings and direction of rotation
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 28432-90: Dried potatoes. Specifications
GOST 29329-92: Balance for static weightings
GOST 6962-75: Electrified transport with overhead system power supply. Voltage row
GOST 7217-87: Rotating electrical machines. Asynchronus motors. Test methods
The Document is Referenced By:
FTS ZhT TsL 01-98: Railway passenger cars. Certification requirements
GOST 10393-2009: Compressors and compressor units for the railway rolling stock. General specifications
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 19780-81: Collectors and slip rings of electrical rotating machines. Diameters
GOST 24790-81: Industrial diesel locomotive. General specifications
GOST 25463-2001: Main-line diesel locomotives for 1520 mm gauge. General technical requirements
GOST 25463-82: Main-line diesel locomotives for 520 mm gauge. General technical requirements
GOST 27905.1-88: Electrical insulation systems of electrical equipment. Evaluation and classification
GOST 28173-89: Rotating electrical machines. Rating and performance
GOST 30487-97: Electric train for suburban communication. General safety requirements
GOST 31187-2003: Main-line diesel locomotives. General technical requirements
GOST 31428-2011: Shunting diesel locomotives. General technical requirements
GOST 33323-2015: Power convertors railway rolling stock. Characteristics and test methods
GOST 33327-2015: Railway bus. General technical requirements
GOST 8802-78: Passenger tram-cars. Specifications
GOST 9219-88: Traction electrical devices
GOST 9219-95: Electrical draft gears. General specifications.
GOST R 50850-96: Metro coaches. General specifications
GOST R 52232-2004: Light rail cars. General specifications
GOST R 54434-2011: Railway application. Rolling stock equipment. Shock and vibration
GOST R 54750-2011: Railway bus. General technical requirements
GOST R 54800-2011: Power convertors railway rolling stock. Characteristics and test methods
GOST R 55182-2012: Passenger cars on locomotive traction. General technical requirements
GOST R 55364-2012: Electric locomotives. General technical requirements
GOST R 55434-2013: Electrical trains. General technical requirements.
NB ZhT TsP 035-99: Special railway rolling stock. Safety standards
NB ZhT TsT 01-98: Diesel train Safety Standards Change №1
NB ZhT TsT 02-98: Diesel locomotives. Safety regulations
NB ZhT TsT 03-98: Electric trains. Safety Standards. Amendments №1-4
NB ZhT TsT 04-98: Electric locomotives. Safety standards
NB ZhT TsT 07-99: Diesel locomotives, gas turbine locomotives, diesel trains and railcars (rail buses). Electrical equipment traction. Safety standards
NPB 109-96: Subway cars. Fire safety requirements.
OST 24.040.02-78: Locomotive and track machine electric chains. Insulation resistance acceptable values.
OST 32.50-95: Designing, manufacturing, installation and testing of electrical equipment for the diesel-electric rolling stock. Technical requirements
R 50-605-89-94: Energy conservation. Order of establishment energy consumption and energy conservation indicators in products and process documentation
ST RK 1518-2006: Diesel locomotives. DC electric rotating traction machines. Requirements for acceptance programmes and test procedures
ST RK 1531-2006: Locomotives of main railways of 1520 mm gage. AC electric rotating tractive machinery. Requirements for acceptance programmes and test procedures
ST RK IEC 60349-1-2007: Electric traction rotating electric machines for railway and road transport. Part 1. Machines other than machines with alternating current motors powered by an electronic converter. Introduced for the first time
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.