GOST 9758-86
ГОСТ 9758-86
|
|
Non-organic porous aggregates for construction work
Заполнители пористые неорганические для строительных работ
Status: Not effective - Superseded. IUS 10-2013
The standard applies to porous inorganic aggregates for lightweight concrete, thermal insulation products and backfills, and other construction works, produced according to the requirements of GOST 9757-83 and GOST 22263-76, and establishes methods for their testing.
Стандарт распространяется на пористые неорганические заполнители для легкого бетона, теплоизоляционных изделий и засыпок, и других строительных работ, выпускаемые по требованиям ГОСТ 9757-83 и ГОСТ 22263-76, и устанавливает методы их испытаний.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Construction,
7/11/1986
SKU: RUSS19975
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
K.63 Crushed stone, gravel and sand for construction work »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh17 Inorganic and organic fillers »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods
As a Replacement Of:
GOST 9758-77: Fillers porous inorganic for concrete. Methods of tests
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10484-78: Reagents. Hydrofluoric acid. Specifications
GOST 10597-87: Painting brishes. Specifications
GOST 12026-76: Filter paper for laboratory application
GOST 12083-78: Photoelectrical laboratory colorimeters. Types, basic parameters. Technical requirements
GOST 1277-75: Reagents. Silver nitrate. Specifications
GOST 14919-83: Household electric ranges, electric plates and electric frying ovens
GOST 166-89: Vernier callipers. Specifications
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 177-88: Hydrogen peroxide
GOST 18297-96: Pig-iron enameled sanitary devices. Technical conditions
GOST 19347-84: Copper sulfate. Technical conditions
GOST 19347-99: Copper sulfate. Technical conditions
GOST 19908-90: Transparent quartz glass crucibles, basins, cups, flasks, funnels, test-tubes and caps. General specifications
GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 23683-89: Hard petroleum paraffines
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25644-96: Powder synthetic detergents. General technical requirements
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 26000-83: Pneumatic tyre. Method of identifying of main sizes
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27543-87: Confectionery. Equipment, materials, reagents and culture media for microbiological analyses
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 29329-92: Balance for static weightings
GOST 310.2-76: Cements. Methods of grinding fineness determination
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3760-79: Reagents. Ammonia water. Specifications.
GOST 4108-72: Reagents. Barium chloride, 2-aqueous. Specifications
GOST 4166-76: Reagents. Sodium sulphate. Specifications
GOST 4171-76: Reagents. Sodium sulphate 10-aqueous. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5802-86: Mortars. Test methods.
GOST 6139-2003: Sand for cement testing. Specifications
GOST 6139-91: Standart sand for cement testing. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-93: Sand for construction works. Specifications
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
GOST 9758-77: Fillers porous inorganic for concrete. Methods of tests
GOST R 51232-98: Drinking water. General requirements for organization and quality control methods
The Document is Referenced By:
GOST 10181.3-81: Concrete mixture. Test method of determination of porosity
GOST 10181-2000: Concrete Mixtures Test method
GOST 10832-2009: Perlite expanded sand and crushed stone. Specifications
GOST 10832-91: Expanded pearlite sand and crushed stone. Specifications
GOST 19222-84: Arbolit and its products. General specifications
GOST 20910-90: Refractory concretes. Specifications
GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 25226-96: Crushed stone and sand perlite for the production of expanded perlite. Technical conditions
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 26644-85: Slag crushed stone and slag sand fly-ash for concrete. Specifications
GOST 30566-98: Filter Perlite powder. Specifications
GOST 32026-2012: Clay raw materials for manufacturing of claydite gravel, rubble and sand. Specifications
GOST 5578-94: Slag crushed stone and slag sand of ferrous and non-ferrous metallurgy for concretes. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods
GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications
GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications
GOST R 55877-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for determination of resistance to wear by abrasive wheels
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
OST 66-14-86: Ferroconcrete complex plates. Specification.
R 377-79: Guidance on the composition and technology of the insulation material with the use of light mineral fillers (expanded clay gravel)
RD 34.09.603-88: Procedural Guidelines for Organization Monitoring Composition and Properties of Ash and Slag Emitted by Thermal Power Station Consumers
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
RD 34.27.406: Procedural Guidelines for Adjustment and Tests of Internal Pneumatic Ash Collection Systems
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SN 525-80: Process Guidelines for Making Polymer Concretes and Polymer Concrete Products
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 3.03.01-87: Bearing and enclosing structures
SP 11-109-98: Prospecting for soil building materials
TR 106-00: Technical recommendations on the use of water-swelling materials for the installation of impervious curtains and screens, and waterproofing underground structures
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 34-4013-73: Slag porous thermal power plants for the production of rubble and sand. Technical conditions
TU 400-I-204-9-92: Ceramic Mix "Tennis"
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 26-76/Gosgrazhdanstroj: Temporary instruction on the non-heated creation of seams and joints in large-panel residential buildings
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.