GOST 8.563.1-97
ГОСТ 8.563.1-97
|
|
Measurement of liquids and gases flow rate and quantity by differential pressure method orifice plates, nozzles isa 1932 and ventury tubes inserted in circular cross-section filled conduits.
Измерение расхода и количества жидкостей и газов методом переменного перепада давления. Диафрагмы, сопла иса 1932 и трубы вентури, установленные в заполненных трубопроводах круглого сечения
Status: Not effective - Canceled. Information about registration 237-st dated 10/31/2006 (the official website of Rosstandart); IUS 1-2007
The standard applies to the measurement of flow and quantity of liquids and gases by the method of variable pressure drop using standard constricting devices (SU) as primary transducers. The standard applies to the measurement of flow and quantity of fluids. The standard establishes requirements for: geometric dimensions and conditions of use of SU installed in circular pipelines completely filled with medium; parameters and conditions of use of SU, for which the coefficients of expiration were determined experimentally.
Стандарт распространяется на измерение расхода и количества жидкостей и газов методом переменного перепада давления с использованием стандартных сужающих устройств (СУ) в качестве первичных измерительных преобразователей. Стандарт распространяется на измерение расхода и количества текучих сред. Стандарт устанавливает требования к: геометрическим размерам и условиям применения СУ, установленных в трубопроводах круглого сечения, полностью заполненных средой; параметрам и условиям применения СУ, для которых коэффициенты истечения были определены экспериментально.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization, Metrology and Certification,
12/11/1997
SKU: RUSS19981
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.120 Measurement of fluid flow parameters »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.120 Measurement of fluid flow parameters »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.120 Measurement of fluid flow parameters »
17.120.01 Measurement of parameters of fluid flow in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.120 Measurement of fluid flow parameters »
17.120.01 Measurement of parameters of fluid flow in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T86 Measurement Techniques »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
The Document is Replaced With:
GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST 8.586.2-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
GOST 8.586.3-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements
GOST 8.586.4-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements
As a Replacement Of:
GOST 23720-79: Venturi tubes. Specifications
GOST 26969-86: Standard orifice plates for flow meters. Specifications
MI 2204-92: State system for ensuring uniformity of measurements. Consumption, mass and volume of natural gas. Methods of measurement using constricting devices
MI 2346-95: State system for ensuring uniformity of measurements. Water flow. Metrological and hydrodynamic characteristics of diaphragms with flange method for selecting pressure drop
RD 50-213-80: Rules of gas and liquid consumption measurement by standard coarct devices.
The Document References:
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 15528-86: Instruments for measuring flow rate, volume or mass of flowing fluid and gas. Terms and definitions
GOST 23720-79: Venturi tubes. Specifications
GOST 24856-81: Industrial pipeline fittings. Terms and definitions
GOST 26969-86: Standard orifice plates for flow meters. Specifications
GOST 2939-63: Gases. Conditions for the determination of volume
GOST 30319.0-96: Natural gas. Methods of calculation of physical properties
GOST 30319.1-96: Natural gas. Methods for the evaluation of physical properties
GOST 30319.2-96: Natural gas. Methods of calculation of physical properties
GOST 30319.3-96: Natural gas. Methods of calculation of physical properties. Definition of physical properties by equation of state
GOST 8.563.2-97: Measurement of liquids and gases flow rate and quantity by differential pressure method measurement procedure by orifice instruments official edition
The Document is Referenced By:
FR 1.31.2010.07688: Measurement procedure for the mass concentration of biochemical oxygen demand in wastewater and natural waters by the titrimetric method
GOST 18140-84: SSI differential pressure gauges. General specifications.
GOST 28547-90: Positive displacement refrigeration compressors
GOST 30392-95: Medical products. Dosimetrical techniques for radiation sterilization
GOST 6134-2007: Rotodynamic pumps. Test methods
GOST 8.563.2-97: Measurement of liquids and gases flow rate and quantity by differential pressure method measurement procedure by orifice instruments official edition
GOST 8.563.3-97: Procedure and module of calculations software
GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST 8.586.2-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
GOST R 50325-92: Medical products. Dosimetric techniques for radiation sterilization
GOST R 51657.0-2000: Water flow measurement in hydromelioration and water economics systems. Basic principles
GOST R 51657.2-2000: Water flow measurement in hydromelioration and water economics systems. Methods of water flow measurement. Classification
GOST R 51657.3-2000: Water flow measurement in hydromelioration and water economics system. Flow gauging structures. Classification
GOST R 51743-2001: Refrigerating machines. Machines for cooling liquids using a turbocompressors. Test methods
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 55154-2012: Equipment mountain-mine. Systems of safety of the coal mines multifunctional. General technical requirements
IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory
Manual: Manual for impulse and low consumption fire extinguishing systems
Methodological Recommendations 29 FC/830: Gas chromatographic determination of the mass concentration of benzene, toluene, ethylbenzene, m-, p- and o-xylols, iso-propylbenzene, n-propylbenzene, styrene, alpha-methylstyrene in water extracts from polystyrene plastics. Methodical recommendations
MI 2578-2003: State system for ensuring the uniformity of measurements. Method of measurement of natural gas in the Moscow region by measurement systems based on orifice with registration of measurement results on the charts recording instruments and the use of these r
MI 2585-2000: State system for ensuring uniformity of measurements. Diaphragm measuring piping. Primary calibration technique
MI 2588-2000: Recommendation. State system for ensuring uniformity of measurements. Consumption and quantity of liquids and gases. Methods of measuring with the help of measuring complexes with narrowing devices for the value of equivalent roughness of measuring pipeli
MI 2634-2001: National Measurement Standards. Flow Rate and Quantity of Liquids and Gases. Method for the Determination of Allowable Range of Measurements and Metrological Characteristics of Measurement Complexes with Orifices
MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices
MI 2667-2004: Recommendation. State system for ensuring uniformity of measurements. Consumption and quantity of liquids and gases. The method of measurement using averaging tubes ANNUBAR DIAMOND II and ANNUBAR 485. Basic provisions
MI 2714-2002: National Measurement Standards. Thermal Energy and Mass of Heat Transfer Agent in Piped Heat Supply Systems. Method for Measurements. Basic Principles
MI 2787-2003: Recommendation. GSE. Consumption and quantity of liquids and gases. Typical values of flow and quantity measurement results using measuring systems with restricting devices and measuring systems design results using MI 2677-2001
MI 2813-2003: State system for ensuring uniformity of measurements. Accounting for heat energy and the amount of coolant. Algorithms for the reaction of heat meters to abnormal situations when taking into account thermal energy
MI 3081-2007: Systems of measurement of quantity and quality of oil, light petroleum products and liquid hydrocarbons. Maintenance and repair. Basics
MUK 4.2.2426-08: Microbiological method of measuring the concentration of cells of the microorganism Acinetobacter species JN-2 (drug destroil) in the atmospheric air of populated areas
MUK 4.2.2427-08: Microbiological method of measuring the concentration of cells of the microorganism Acinetobacter species JN-2 (Destroil preparation) in the air of the working area
MUK 4.2.3033-12: Microbiological method for measuring the concentration of mold of the fungus Penicillium verruculosum PV2007 VKM F-3972D - producer of carbohydrase complex in the atmospheric air of populated areas
MUK 4.2.3034-12: Microbiological methods for measuring the concentration of cells of the mycelium fungus Trichoderma longibrachiatum TW-420 BKM F-3880D - producer of cellulases, beta-glucanase and xylanase in the atmospheric air of populated areas
MUK 4.2.3035-12: Microbiological methods for measuring the concentration of cells of the mycelium fungus Trichoderma longibrachiatum TW-420 BKM F-3880D - producer of cellulases, beta-glucanase and xylanase in the air of the working area
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport
PR 50.2.022-99: National system for uniformity of measurements of the Kyrgyz Republic. The procedure of state control and supervision over the use and condition of measurement kits with restrictive flow orifice devices.
R 50.2.002-2000: State system for ensuring uniformity of measurements. Measurement of flow and quantity of liquids and gases by the method of variable pressure differential. Designing automated measuring systems equipped with flow meters with constricting devices. Calculation of the flow of liquids and gases and errors of flow meters. Program complex Flowmeter-ST
RD 153-34.0-11.326-00: Method for Measurements of Fuel Oil Flow Rate Using Special Orifice Devices
RD 153-34.0-11.341-00: Method for Measurements of Quantity of Thermal Energy Released from Heat Sources in Piped Hot Water Heat Supply Systems
RD 153-34.0-11.342-00: Method for Measurements of Quantity of Thermal Energy Released from Heat Sources in Piped Steam Heat Supply Systems
RD 153-34.0-11.343-00: Method for Measurements of Flow Rate and Quantity of Steam Released from Heat Sources in Piped Steam Heat Supply Systems
RD 153-34.0-11.346-00: Method for Measurements of Flow Rate and Quantity of Heat Transfer Agent in Piping of Piped Hot Water Heat Supply Systems to Heat Source
RD 153-34.0-11.350-00: Method for Measurements of Flow Rate and Quantity of Condensate Returned to Heat Source from Piped Steam Heat Supply Systems
RD 153-34.0-11.401-98: Procedural Guidelines. Determination of Demand for Metrological Services of Electric Energy Companies and Organizations in Production Resources
RD 153-34.1-11.314-00: Method for Measurements of Feed Water Flow Rate Downstream of High Pressure Reheaters at Thermal Power Stations
RD 153-34.1-11.315-99: Method for Measurements of Flow Rate of Natural Gas Supplied to Boilers at Thermal Power Stations
RD 153-34.1-11.354-2001: Recommended Practice for Design and Use of Special Orifice Devices for Measurement of Fuel Oil Consumption at Thermal Power Stations
RD 153-34.1-20.329-2001: Procedural Guidelines for Testing Piped Hot Water Heat Supply Networks for Maximum Temperature of Heat Transfer Agent
RD 153-34.1-37.313-00: Method for Thermal Chemistry Tests of Stationary Natural-Circulation Steam Boilers
RD 153-39.4-113-01: Standards for technological design of main pipelines
SO 34.26.729: Recommendations for the commissioning of intra-boiler separation devices for drum boilers
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
TSN 41-311-2004 MO: Autonomous heat sources
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
