PB 03-584-03

ПБ 03-584-03

Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses

Правила проектирования, изготовления и приемки сосудов и аппаратов стальных сварных

Status: Effective

The rules apply to designed, newly manufactured and upgraded steel welded vessels and devices operating under a pressure of not more than 16 MPa (160 kgf

Правила распространяются на проектируемые, вновь изготавливаемые и модернизируемые стальные сварные сосуды и аппараты, работающие под давлением не более 16 МПа (160 кгс/см2), вакуумом с остаточным давлением не ниже 665 Па (5 мм рт. ст.), внутренним давлением 0,07 МПа (0,7 кгс/см2) и менее (под налив) и при температуре стенки не ниже минус 70 градусов Цельсия, а также на действующие стальные сварные сосуды и аппараты, эксплуатирующиеся на опасных производственных объектах. Возможность распространения требований Правил на конкретные типы и виды сосудов и аппаратов определяется условиями эксплуатации, при необходимости обосновывается расчетами и устанавливается проектом

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 50

Approved: Gosgortekhnadzor of Russia, 6/10/2003

SKU: RUSS19982

Price: $247.50


The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Regulatory documents of Gosgortekhnadzor »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Welding staff »

Welding regulations » Admission Testing »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Technical Supervision » Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact » IV. Regulatory legal acts and regulations » 2. Industrial safety » 2.1. Common to various hazardous production facilities »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 1 General industrial safety requirements for operation of a hazardous production facility »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.020 Storage tanks for liquids and gases » 23.020.30 Pressure vessels, gas cylinders »


As a Replacement Of:

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

The Document References:

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 03-517-02: Regulations for Organizations Executing Activity in the Field of Industrial Safety at Hazardous Production Facilities

The Document is Referenced By:

ATK-RE 2004: Shell and tube heat exchangers and "pipe in pipe" heat exchangers. Manual

ATK-RE 2011: Shell and tube heat exchangers and "pipe in pipe" heat exchangers. Manual

ATK-RE 2013: Shell-and-tube heat exchangers and pipe-in-tube heat exchangers manufactured according to TU 3612-005-00220302, TU 3644-006-00220302, TU 3612-017-00220302, TU 3612-013-00220302, TU 3612-014-00220302, TU 3612-013 023-00220302, TU 3612-024-00220302, TU 3612-100-00220302. Manual

DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements

GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55141-2012: Associated gas processing. Small-sized block gas - processing complexes. General technical requirements

GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements

GOST R 56006-2014: Pipeline valves. Testing and acceptance on objects of the gas main pipelines before commissioning. General technical requirements

GOST R 8.909-2016: State system for insuring the uniformity of measurements. Secondary standards of units of mass and volumetric flow rate, mass and volume fluid. General metrological and technical requirements

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries

PB 09-592-03: Rules for arrangement and safe operation of refrigerating systems

PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications

RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.

RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 2082-18-2005: Technical diagnosis and design life prolongation program for cryogenic tank.

SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants

SP 162.1330610.2014: Safety requirements for production, storage, transportation and use of liquid hydrogen

STO SA 03.003-2009: Vessels and apparatus. Norms and methods of strength calculation. Calculation of seismic effects

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications

Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"

Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)

Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety

TU 3612-127-00220302-2007: Air coolers for nominal pressure up to 16 MPa

TU 3615-018-00217320-2006: Spherical tanks. Technical specifications

TU 3615-132-00220302-2008: Ball tanks for liquefied petroleum gases. Specifications

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!