PB 08-342-00
ПБ 08-342-00
|
|
Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations
Правила безопасности при производстве, хранении и выдаче сжиженного природного газа (СПГ) на газораспределительных станциях магистральных газопроводов (ГРС МГ) и автомобильных газонаполнительных компрессорных станциях (АГНКС)
Status: Not effective - Canceled. By the order of Rostekhnadzor No. 168 dated April 23, 2015
The rules establish requirements that should be taken into account when designing LNG production facilities with a total LNG storage volume of up to 250 m with a unit capacity of cryogenic tanks not exceeding 250 m3. The rules apply to newly designed and reconstructed LNG complexes.
Правила устанавливают требования, которые должны учитываться при проектировании объектов производства СПГ с общим объемом хранения СПГ до 250 м при единичной емкости криогенных резервуаров не более 250 м3. Правила распространяются на вновь проектируемые и реконструируемые комплексы СПГ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
2/8/2000
SKU: RUSS19992
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.5. Objects of main pipeline transport »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.5 Industrial safety requirements for gas distribution and gas consumption facilities »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.16 Ensuring safety of working with flammable and combustible liquids »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
75.200.20 Storage facilities. Reservoirs. Handout devices »
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 17.4.2.01-81: Nature protection. Soils. Nomenclature of sanitary conditions indices
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 18917-82: Natural gas fuel. Methods of sampling
GOST 19281-73: Low alloyed sorted and shaped steel
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 20072-74: Heat-resistant steel
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 380-71: Common quality carbon steel. Grades
GOST 4543-71: Structural alloyed steel
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
OST 26-2044-83: Butt and corner welded joint seams of pressure-operated vessels and devices. Ultrasonic control method.
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-273-99: Rules for qualification test of welders and welding production specialists
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-585-03: Process Pipelines Design and Safe Operation Rules
PB 03-591-03: Rules of design and safe operation of flare systems
PB 09-12-92: Rules on the flare system design and safe operation
PB 09-170-97: General rules on explosion safety for explosive- and fire-hazardous chemical, petrochemical plants and oil refineries
PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 12-245-98: Safety Requirements for Gas Supply Facilities
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
PPB 01-93*: Fire Safety Rules in the Russian Federation
RD 03-129-96: Procedure for Development of a Safety Declaration for a Facility in the Russian Federation
RD 03-293-99: Statute laying down a procedure for technical inquiry into the causes of failures at hazardous production facilities
RD 03-444-02: The provision of procedure for training and qualification test of workers of organizations engaging in activities of industrial safety of hazardous industrial sites under supervision of Gosgortekhnadzor, Russia
RD 04-265-99: Regulations of training and official evaluation of employees of enterprises operating hazardous production facilities under control of the Gosgortekhnadzor of Russia
RD 09-364-00: Safety Instructions for hot works in hazardous and explosive areas.
SanPiN 2.2.1/2.1.1.567-96: Sanitary Protection Zones and Sanitary Classification of Enterprises, Constructions and other Objects
SNiP 2.01.01-82: Construction climatology and geophysics
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 2.09.03-85: Structures for industrial installations
VNTP 51-1-88: Industry norms of technological design of Installations for Production and Storage of Liquefied Natural Gas, Isothermal Storages and Gas Filling Stations
VPPB 01-04-98: Fire prevention rules for enterprises and organizations of the gas industry
VRD 39-1.10-069-2002: Provisions on technical operation of gas distribution stations of gas mains
The Document is Referenced By:
GOST R 56021-2014: Liquefied natural gas. Fuel for internal-combustion engine and generating unit. Specifications
OST 26-04-2153-77: Labour safety standard system. Cryogenic equipment. General safety requirements and constructions.
VRD 39-1.10-064-2002: Equipment for liquefied natural gas (LNG). General technological requirements when operating storage, transportation and gasification
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.