Sanitary standards for the design of industrial enterprises
Санитарные нормы проектирования промышленных предприятий
Status: Not effective - Superseded
Standards apply to the design of newly built and reconstructed enterprises, buildings and structures of industry, transport, communications, agriculture and power plants, pilot production plants and installations.
Нормы распространяются на проектирование вновь строящихся и реконструируемых предприятий, зданий и сооружений промышленности, транспорта, связи, сельского хозяйства и электрических станций, опытно-экспериментальных производств и установок.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
11/5/1971
SKU: RUSS20000
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of State Committee for Sanitary and Epidemiological Supervision and Ministry of Health of Russian Federation »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
2 Requirements of occupational health to placement, design, construction, reconstruction and operation of production facilities »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.20 Commercial and industrial buildings »
The Document is Replaced With:
SanPiN 2.2.1/2.1.1.567-96: Sanitary Protection Zones and Sanitary Classification of Enterprises, Constructions and other Objects
SP 2.2.1.1312-03: Occupational hygiene enterprise designing building reconstruction and maintenance. Hygienic requirements to the designing of new and reconstructible industrial enterprises
As a Replacement Of:
SN 106-60: Sanitary standards for the design of enterprises in the meat industry
SN 245-63: Sanitary standards for the design of industrial enterprises
The Document is Referenced By:
ATK-RE 2004: Shell and tube heat exchangers and "pipe in pipe" heat exchangers. Manual
G-14540: Typical technological process of operation of railway stations for loading and draining oil cargoes and washing and steaming enterprises for cleaning and preparing tanks for the carriage of goods
GOST 10580-2006: Technological foundry equipment. General specifications
GOST 10667-90: Sheet organic glass. Specifications
GOST 12.2.007.9-93: Electric heating equipment safety
GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements
GOST 12.2.072-82: Occupational safety standards system. Industrial robots, technological complexes and sections with robots. General safety requirements
GOST 12.3.001-73: Occupational safety standards system. Pneumatic actuators. General safety requirements
GOST 12.3.014-90: Occupational safety standards system. Manufacture of pressed wood shaving plates. General safety requirement
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12.3.027-2004: Foundry work. Safety requirements
GOST 12.3.027-92: Foundry work
GOST 12302-83: Bags made of polymeric and composite materials. General specifications
GOST 13821-77: Single-operator rectifiers with falling external characteristics for arc welding. General specifications
GOST 16019-78: Radio stations for land mobile service. Requirements for mechanical and environmental resistance and test methods
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 17.5.3.01-78: Nature protection. Lands. Composition and size of suburban green plantations
GOST 19360-74: Film liner-bags. General specifications
GOST 21126-75: Electrical articles. Materials, coatings, assemblies and parts. Methods of accelerated testing for durability and storage in aggressive environments. General principles
GOST 22397-77: Zinc powder. Method of spectral analysis
GOST 22518.1-77: Lead of high purity. Chemical spectral method for the determination of additions
GOST 22723-77: Machines for grinding wooden floors. Specification
GOST 23661-79: Multilayer printed circuit boards. Requirements to standard technological pressing process
GOST 23770-79: Printed circuit boards. Standard processes of chemical and galvanic metallization
GOST 24507-80: Non-destructive testing. Forgings from ferrous and non-ferrous metals. Ultrasonic methods of slow defection
GOST 27597-88: Electronics items. Corrosion resistance evaluation method
GOST 28269-89: High-power stationary steam boilers
GOST 30373-95: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, basic parameters, technical requirements and test methods
GOST 31335-2006: Technological foundry equipment. Equipment for shot shooting, shot blasting and shot shooting-blasting treatment. Safety requirements
GOST 4.208-79: Quality rating system. Building. Timber glulam structures. Nomenclature of characteristics
GOST 4426-80: Electrodes and nipples, with graphite. Specification
GOST 4641-80: Сoal tars for road constructions
GOST 5.2050-73: Aircompressor ТВ-80-1,6. Quality requirement of certified products
GOST 5960-72: Flexible PVC for insulation and protective jackets of wires and cables. Specifications
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST 8857-77: Lead. Method of spectral analysis
GOST 9.012-73: Unified corrosion and ageing protection system. Metal and non-metal inorganic coating. Methods of accelerated tests for atmospheric corrosion
GOST 9.048-89: Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance
GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests
GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests
GOST 9.715-86: Unified system of corrosion and ageing protection. Polymeric materials. Test methods for temperature shock resistance
GOST 9.716-91: Unified system of corrosion and ageing protection. Polymeric materials. Methods of determining variation of plasticizer content with ageing
GOST 9.717-91: Unified system of corrosion and ageing protection. Polymeric materials. Method of determining the mass portion of chemically and physically bound water
GOST 9.718-93: Unified system of corrosion and ageing protection. Polymeric materials. Antioxidant protective efficiency determining method
GOST 9.906-83: Unified system of corrosion and ageing protection. Test climatic stations. General requirements
GOST R 50414-92: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, general parameters, technical requirements and test methods
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 55805-2013: Non-destructive testing. Ultrasonic monitoring of texture in rolled steel sheets. General requirements
GOST R 55806-2013: Non-destructive testing. Ultrasound measurement of bonding strength of layers in bimetal. General requirements
GOST R 55807-2013: Non-destructive testing. Ultrasonic monitoring of internal straight pipe threads. General requirements
GOST R 56185-2014: Technical diagnostics. Evaluation of stresses in sides of pressure vessels by ultrasound. General requirements
GOST R 56186-2014: Technical diagnostics. Evaluation of a status of long used rails by acoustic method. General requirements
GOST R 56187-2014: Technical diagnostics. Ultrasonic monitoring of steel overheating sheets. General requirements
GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
ITP 31-87: Instructions for the technological design of enterprises for the production of perfumery products
ITP 52-89: Instructions for the design of enterprises for the primary processing of flax
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 1.02.01-85: Manual on the compilation of the section of the project (working draft) "Environmental Protection"
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.05-86: Manual for the design of automated climate control systems for industrial buildings
Manual for SNiP 2.07.01-89: Water and Sewerage Manual for Urban and Rural Settlements
Manual for SNiP 2.07.01-89: A guide for the design of urban (local) telephone networks and wired broadcast networks of urban and rural settlements. Dispatching engineering equipment systems
Manual for SNiP 2.07.01-89: Power supply of settlements
Manual for SNiP 2.07.01-89: Heat and gas supply of settlements
Manual for SNiP 2.08.02-89: Design of vocational, secondary special educational institutions and educational combines
Manual for SNiP 2.08.02-89: Design of kindergartens
Manual for SNiP 2.08.02-89: Design of warning and evacuation systems for people during fires in public buildings
Manual for SNiP 2.08.02-89: Health Facility Design Guide
Manual for SNiP 2.08.02-89: Club Design
Manual for SNiP 2.08.02-89: Pool Design
Manual for SNiP 2.08.02-89: Design of educational complexes and centers
Manual for SNiP 2.08.02-89: Designing Higher Educational Institutions and Continuing Education Institutions
Manual for SNiP 2.08.02-89: Designing consumer services enterprises
Manual for SNiP 2.08.02-89: Design of catering facilities
Manual for SNiP 2.10.05-85: Manual on the design of enterprises, buildings and structures for the storage and processing of grain
Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction
Methodical instructions 2942-83: Improvement of working conditions at enterprises producing and using phosphors
MI 1267-86: Guidelines. Ultrasound Transducers Prize-D11. Method of verification
MI 2191-92: Recommendation. State system for ensuring uniformity of measurements. Sinus rulers. Verification Method
MI 2564-99: State system for ensuring uniformity of measurements. Calibration characteristics of gas stations and tank farms. Methods of determination and control using fuel dispensers during operation
MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE
MI 571-84: Guidelines. Ultrasonic flaw detector UD2-12 (2.1). Method of verification
MI 670-84: Guidelines. Determination of the need of testing units in production resources
MI 88-76: Application of GOST 8.050-73
MR 1124-73: Guidelines for the prevention of the adverse effects of a heating microclimate during industrial training of youth in metallurgical professions
MR 2181-80: Guidelines for reducing the negative impact of monotony in conveyor-flow production
MR 2184-80: Physiological rationale for the organization of a typical work and rest schedule for managers of industrial enterprises.
MR 2208-80: Rational organization of typical work and rest schedules for anodets and electrolyzers in aluminum production
MR 2291-81: Guidelines for improving the conditions of training and education of students of the communication specifications in the specialty telegraph
MR 2986-84: Guidelines for the fight against noise and vibration in the steel industry
MR 4955-89: Prevention of adverse effects of work on the health of employees of the administrative and managerial apparatus
MU 1321-75: Guidelines for the improvement of working conditions in the production and use of atmospheric corrosion inhibitors of metals and inhibited paper
MU 1322-75: Guidelines for the conduct of precautionary and routine supervision of artificial lighting in industrial plants
MU 1719-77: Guidelines for the gravimetric determination of dust in the air of the working area and in the systems of ventilation systems
MU 2039-79: Guidelines for the implementation of state sanitary supervision of the design, construction and operation of plants for biothermal processing of solid waste
MU 2055-79: Guidelines for the implementation of state sanitary inspection of objects with sources of electromagnetic fields of the non-ionizing part of the spectrum
MU 2156-80: Guidelines for the implementation of state sanitary supervision of systems for the collection, removal, storage, decontamination and use of manure and manure from livestock farms and industrial-type farms
MU 2515-81: Guidelines for the organization of training of students of higher educational institutions
MU 2642-82: Guidelines for the organization of sanitary-epidemiological service control of enterprises of the dairy industry
MU 2656-82: Guidelines for the sanitary protection of atmospheric air in the areas where refining and petrochemical enterprises are located
MU 2665-83: Hygienic requirements for the design and operation of equipment in powder metallurgy enterprises
MU 4258-87: Guidelines for the definition and hygienic regulation of electromagnetic fields generated by coastal and shipborne radar stations
MU 4425-87: Sanitary and hygienic control of ventilation systems of production areas
MU 4428-87: Guidelines for improving the state preventive sanitary inspection of the design of workshops and welding stations, the development of technological processes and equipment for welding production
MUK 4.1.1482-03: Determination of the content of chemical elements in diagnosable biosubstrates, multivitamin preparations with microelements, in biologically active food supplements and in raw materials for their manufacture by atomic emission spectrometry with inductive
MUK 4.1.1483-03: Determination of the content of chemical elements in diagnosable biosubstrates, preparations and biologically active additives by mass spectrometry with inductively coupled argon plasma
MUK 4.1.672-97: Gas chromatographic determination of methylacetylene concentrations in ambient air
MUK 4.1.763-99: Gas chromatographic method for the quantitative determination of acetone in biological media (urine)
MUK 4.1.764-99: Gas chromatographic method for quantitative determination of limit (hexane, heptane) and aromatic (benzene, toluene, ethylbenzene, o-, m-, p-xylene) hydrocarbons in biological media (urine)
MUK 4.1.765-99: Gas chromatographic method for quantitative determination of aromatic (benzene, toluene, ethylbenzene, o-, m-, p-xylene) hydrocarbons in biological media (blood)
MUK 4.1.766-99: Gas chromatographic method for quantitative determination of aromatic amino compounds (aniline, N-methylaniline, o-toluidine, N,N-dimethylaniline, N-ethylaniline, N,N-diethylaniline) in biological media (urine)
MUK 4.1.767-99: Gas chromatographic method for quantitative determination of aromatic amino compounds (aniline, N-methylaniline, o-toluidine, N,N-dimethylaniline, N-ethylaniline, N,N-diethylaniline) in biological media (blood)
MUK 4.1.768-99: Method for quantitative determination of exogenous phenol in biological media (urine)
MUK 4.1.769-99: Quantitative determination of formaldehyde in the urine by high performance liquid chromatography
MUK 4.1.770-99: Quantitative determination of formaldehyde in blood by high-performance liquid chromatography
MUK 4.1.771-99: Gas chromatography determination of concentrations of methyl, ethyl, isopropyl, propyl, isobutyl and butyl alcohols in urine
MUK 4.1.772-99: Gas chromatographic determination of concentrations of methyl, ethyl, isopropyl, propyl, isobutyl and butyl alcohols in the blood
MUK 4.1.773-99: Quantitative determination of fluoride ions in urine using an ion-selective electrode
MUK 4.1.774-99: Determination of iron, zinc, nickel in the urine by atomic absorption
MUK 4.1.775-99: Determination of iron, zinc, nickel content in bile by atomic absorption method
MUK 4.1.776-99: Determination of iron, zinc, nickel, copper and chromium in the hair by atomic absorption
MUK 4.1.777-99: Determination of zinc, nickel, copper and chromium in the blood by atomic absorption
MUK 4.1.778-99: Determination of zinc, nickel, copper and chromium in human milk by atomic absorption
MUK 4.1.779-99: Determination of manganese, lead in urine by atomic absorption
NTP 10-95: Engineering Design Standards for Greenhouses and Hothouses for Growing Vegetables and Seedlings
NTP 23-94: Norms of plant design for the production of soap
NTP 45.588-76: Buildings of civil enterprises of wire and postal service
NTP 53-91: Norms of technological design of production of mayonnaise
NTP 577/468: Instructions for technological design of cognac plants
NTPD-90: Norms of technological design of diesel power plants
NTP-SH 4-72: Norms of technological design of poultry farms
ODM 218.3.059-2015: Guidelines for the use of electromagnetic devices for the operational control of the quality of soil compaction
OND-86: Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions
ONTP 01-82/Minavtoprom: All-Union norms for technological design of engineering, instrument-making and metal-working enterprises. Forging shops
ONTP 01-85/Minjelektrotehprom: All-Union norms for the technological design of electrical repair shops (departments) of engineering, instrument-making and metalworking enterprises
ONTP 01-86: All-Union standards for the technological design of engineering, instrument-making and metal-working enterprises. Forge and press shops
ONTP 02-85: National Engineering Design Standards for Lumbering Facilities
ONTP 03-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Paint Shops
ONTP 04-85: All-Union norms for technological design of timber transshipment enterprises
ONTP 04-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Shops of cold sheet metal stamping
ONTP 04-94: Sectoral norms of technological design of enterprises in the automotive industry. Shops of cold sheet metal stamping
ONTP 05-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Metal plating workshops
ONTP 06-86: All-Union norms for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Workshops for the manufacture of special technological and non-standardized equipment, means of mechanization and automation an
ONTP 08-79/Minavtoprom: Temporary all-Union norms for technological design of engineering enterprises. Workshops for the production of non-standard equipment and means of automation and mechanization
ONTP 08-87: All-Union norms for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the repair of pipelines, sanitary appliances and heat and power equipment
ONTP 09-85: All-Union norms of technological design of enterprises for the production of products from cellular and dense autoclaved concrete
ONTP 09-88: All-Union standards for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Assembly and welding shops
ONTP 10-85: All-Union norms of technological design of production for the manufacture of products from metal powders based on iron and copper
ONTP 11-85: All-Union norms for technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling
ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)
ONTP 16-86: All-Union standards for technological design of thermal areas, workshops, production facilities of enterprises of mechanical engineering, instrument engineering and metalworking
ONTP 1-85/Minstrojdormash: All-Union norms of technological design of engineering enterprises, instrument making metallo-processing. Metalwork shops (Stocking and welding production)
ONTP 1-86: All-union regulations of technological engineering of liquefied petroleum gas extraction plants
ONTP 18-85: All-Union Norms of Technological Design of Nonmetallic Building Materials Enterprises
ONTP 2-87: All-Union standards for technological design of plastics processing facilities. II part
ONTP 444-86: National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components
ONTP 4-86: All-Union norms of technological design of transport on the surface of mining enterprises
ONTP 51-1-85: National Engineering Design Standards. Trunk Pipelines. Part I: Gas Pipelines
ONTP 5-78: Engineering Design Standards for Substations Operating at 35-750 kV Maximum Operating Voltage
ONTP 6-85: All-Union norms of technological design of warehouse complexes and mechanical repair shops of mines, mines and concentration plants of the mining industry
OSGiSPPiN: National Sanitation and Hygiene Regulations and Sanitation and Disease Control Regulations. Sanitary Regulations for Asbestos Handling
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
OSP-72/87: Basic sanitary rules for working with radioactive substances and other sources of ionizing radiation
OST 108.001.102-76: Products for export. General requirements
OST 108.004.108-80: Welded connections and depositing of nuclear power plants equipment. Ultrasound testing methods
OST 108.958.03-96: Steel forgings for power equipment. Ultrasound Testing Technique
OST 1-42172-83: Control of protective environment during welding of parts from titanium alloys
OST 24.023.29-84: Production planning system. Expanded plastic details produced by compression moulding and high-pressure die casting. Standard techniques and procedures.
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
OST 24.090.39-78: Shell stacker cranes. Specifications.
OST 26-02-535-78: Piston oil pumps with electric drive and regulated supply
OST 32.13-82: Preparation of tanks for filling and repair. Safety requirements
OST 34 739-75: Heating and ventilation of hot-dip galvanizing workshops of metal poles of power lines. Design Standards
OST 35-06-78: Labour safety standard system. Vibratory pile driving. Safety requirements.
OST 35-15-82: Technological processes. Waterproofing of concrete roof panels with mastic compounds in the factory.
OST 36-111-84: Anti-corrosion protection. Design of work production. Order of development, structure and content.
OST 36-76-83: Non-destructive testing. Welded joints of pipelines and structures. Colour method.
OST 39-099-79: Corrosion inhibitors. Method for effectiveness evaluation of protective effect of corrosion inhibitors in oilfield wastewater.
OST 4 G0.033.200: Solders and fluxes for soldering, solder pastes. Brands, composition, properties and scope (edition 1-78)
OST 4.054.035-78: Spring elements from alloys of ferrous and non-ferrous metals. Heat treatment. Typical Processes
OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.
OST 64-7-472-83: Occupational safety standards system. Production processes of finished pharmaceutical products. Production of ampouled injections. Safety requirements.
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PB 06-09-92: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits
PI 1.2.315-89: Production of glazing parts from organic glasses
PNAE G-1-001-85: Typical content of the technical justification for the safety of nuclear power plants
PNAE G-14-038-96: Requirements to the report on justification of safety of radioactive wastes storage buildings in part of outer impacts account
PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)
PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection
PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination
POT R M-002-97: Intersectoral rules on labor protection in foundry
POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products
POT R M-028-2003: Intersectoral labor protection regulations for plastics processing
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
POT R O-152.31.82.03-96: Occupational health and safety regulations in seaports
PPB 12-70: Temporary rules for the transportation, storage and use of fireworks
PV NP 78: Rules for acceptance, testing and operation of the ventilation systems of oil refining and petrochemical enterprises
R 3113199-0340-95: Program for the training of engineering and technical workers on the organization of technical operation of gas-cylinder vehicles operating on liquefied hydrocarbon and compressed natural gas
R 393-80: Recommendations for aluminum metallization of the inner surface of pipes with an outer polyethylene coating and welding of annular joints
R 466-82: Guidelines for conducting induction training on labor protection in organizations and enterprises of the Ministry of Oil and Gas Industry
R 50-54-37-88: Recommendations. Calculations and tests of strength. Methods of mechanical testing of metals. Test method for corrosion cracking with a constant rate of deformation
RD 08-200-98: Safety rules in the oil and gas industry
RD 112 RSFSR-023-89: Guidelines. GSE. Capacity technological pipelines. Measurement Technique
RD 152-001-94: Ecological requirements for transportation enterprises
RD 153-34.0-02.303-98: Instructions for regulation of emissions of air pollutants for thermal power plants and boilers.
RD 153-34.0-20.522-99: Model Guidelines for Periodic In-Service Technical Certification of Pipelines of Piped Heat Supply Networks
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 153-34.1-03.352-99: Explosion Safety Requirements for Fuel Supply and for Facilities for the Manufacturing and Combustion of Powder Fuel
RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.
RD 153-34.1-17.467-2001: Rapid method for evaluating remaining life of boiler header and steam pipeline joints according to structure factor.
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 153-39TN-008-96: Guide to Operation, Maintenance, and Repair of Equipment and Facilities of Petroleum Pumping Stations
RD 153-39TN-009-96: Ordinance on the System for Maintenance and Repair of Electrical Installations of Trunk Petroleum Pipelines Part I
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 24.023.52-90: Products of chemical engineering. Gumming. Typical technological process.
RD 24.200.13-90: Seamless steel pipes. Methodic of uniformity incoming ultrasonic control.
RD 26.260.011-99: Methodological instructions. Calculated setting of standards for air-tightness of vessels and apparatuses.
RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.
RD 31.06.03-83: Procedure for Standardization of Discharges from Ship Repair Facilities Administered by the Ministry of the Merchant Marine
RD 31.11.81.36-81: Rules for the sea transportation of oil and oil products in bulk on MMF tankers
RD 31.30.11.01-84: Guideline on technological design of communication and the alarm system in seaports and at the MMF ship-repair enterprises. Wire communications capabilities.
RD 31.52.10-82: Temporary ventilation systems for ship premises during repair. Rules for design and operation
RD 31.52.12-88: Ship propeller shafts. Recovery by electric arc surfacing with pearlitic and austenitic steels
RD 31.52.17-86: Recommendations for artificial heating when painting ships in docks
RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.
RD 34.03.105: Procedural Guidelines for Organization of Safety and Industrial Sanitation Work at Electric Power Generating Stations and in Power Grids
RD 34.03.211: Safety Guidelines for Reinforcing Work in Underground Works for Construction of Hydroelectric Generating Stations
RD 34.03.351-93: Rules for Explosion Safety When Using Fuel Oil As Fuel in Boiler Plant
RD 34.10.130-96: Instructions for visual and measuring control.
RD 34.11.305: Measurement procedure for measuring the total emission of sulfur dioxide with flue gases at thermal power plants using the gas analyzer GIAM-10
RD 34.17.302-97: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements. Quality control. Ultrasonic control. Main principles.
RD 34.17.405-96: Procedural Guidelines for Ultrasonic Inspection of Thin-Wall Components of Steam Superheaters and Steam Lines
RD 34.20.131: Instructions for the protection of heat networks from electrochemical corrosion
RD 34.20.162: Recommended Practice for the Design Organization Operation of Hydroelectric Generating Stations and Hydroelectric Pumped Storage Power Plants
RD 34.20.501-95: Technical operation rules for power plants and networks of the Russian federation
RD 34.21.306-96: Procedural Guidelines for Inspection of the Dynamic State of Structural Elements of Structures and Equipment Foundations at Facilities of the Energy Industry
RD 34.21.528: Model Guidelines for Operation of Central Air Conditioning Systems and Steam-Water Ejector Refrigerators
RD 34.21.543-88: Model Guidelines for Operation of Hydraulic Structures for Process Water Supply Systems of Thermal Power Stations
RD 34.21.622-96: Procedural Guidelines for Inspection of Roof Structures of Main Buildings of Thermal Power Stations
RD 34.35.412-88: Requirements for Acceptance into Operation from Installation and Adjustment of Thermal Power Station Process Control Systems
RD 34.48.151-72: Norms of technological design of dispatching points and nodes SDTU power systems
RD 39-0147098-005-88: Environmental Protection Regulations for the Production, Treatment, and Transportation of Crude Oil
RD 39-0148052-537-87: Model of a Working Design for Construction of Oil and Gas Wells
RD 39-0148070-026VNII-86: Optimum application technology for scale inhibitors
RD 39-030-90: Technology of complex processing of oil emulsions by demulsifiers and corrosion inhibitors
RD 39-090-91: Guidelines for Safe Practice in Geodetic Engineering Laboratory Operations
RD 39-1-1261-85: Technological regulations on the use of demulsifiers in oil preparation processes
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 39-133-94: Instructions for protecting the environment during onshore oil and gas well construction
RD 39-135-94: Norms for technological design of gas-processing plants
RD 39-22-359-80: Drilling rotors. Measurement Technique for Determining and Controlling Noise and Vibration Characteristics
RD 39-22-617-81: Uniform safety standards for the development of basic types of oil and gas equipment
RD 39-30-1093-84: Methodology for the accelerated assessment of the service life of polymer coatings to protect oilfield equipment from corrosion
RD 39-30-806-82: Instructions for use of the Don-2 bacterial corrosion inhibitor for the protection of equipment and communications in a wastewater disposal system
RD 39-30-808-82: Instructions for the use of ANP-2 as an inhibitor of bacterial corrosion for the protection of equipment and communications in a waste water disposal system
RD 39-30-85-78: Rules of operation of treatment facilities of oil-trunk pipeline bases, loading depots and pumping stations.
RD 39-3-943-83: Instructions for use of the corrosion inhibitor ANP-2M for the protection of pipelines of a system for collecting waterlogged oil
RD 39-3-944-83: Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water
RD 50-156-79: Guidelines. Determination of the capacity and graduation of reinforced concrete cylindrical tanks with a precast wall with a capacity of up to 30,000 cubic meters by the geometrical method
RD 50-443-83: Guidelines. Application of GOST 8.395-80 "GSI. Normal measurement conditions during calibration. General requirements"
RD 51-2-97: Instructions for in-line inspection of pipeline systems
RD 52.18.70-86: Unified industry norms of time for work on soil sampling, their analysis and processing of observational materials
RD 52.18.70-86: Unified industry norms of time for work on soil sampling, their analysis and processing of observational materials
RD 87-32-4H/649-87: Guidelines for the development and implementation of reprographic systems for various purposes
RD 87-32-4N/649-87: Guidelines for the development and implementation of reprographic systems for various purposes
RD EO 0356-02-2002: Technical Requirements for the Design of Storage for Packages of Solid and Hardened Radioactive Waste in Reinforced Concrete Protective Non-Returnable Containers of the NZK-150-1.5P Type
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 213: On Approval of Chapter SNiP II-89-80 "General Plans of Industrial Enterprises"
RGP-85: Guidelines for cargo transportation on domestic air routes of the USSR
RSN 40-81: Instructions for use of organosilicate compositions for corrosion protection of metal and other building structures, process equipment and decoration finishes of the building materials and facades of buildings
RTM 108.021.102-85: Steam turbine power units. Foundation requirements
RTM 24.080.23-72: Safety precautions. The content and construction of the section in the standards and design documents for machines and mechanisms for underground mining
RTM 34-9TEP-04-79: Rules for the design of heating and ventilation (dust removal and cleaning of rooms) of the fuel supply paths of thermal power plants
RTP 37-87: Technological design guidelines for the repair and maintenance of agricultural equipment
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
Sanitary rules 1451-76: Sanitary rules for enterprises for the production of welding materials (electrodes, flux-cored wire and fluxes)
SanPiN 1118-73: Guidelines for the sanitary supervision of biological ponds
SanPiN 1746-77: Sanitary Regulations for the Design, Construction, and Operation of Non-Recycled Industrial Waste Disposal Sites
SanPiN 2.2.0.555-96: Hygienic Requirements for the conditions of Work of Women
SanPiN 2.2.1/2.1.1.567-96: Sanitary Protection Zones and Sanitary Classification of Enterprises, Constructions and other Objects
SanPiN 2.2.3.570-96: Hygienic Requirements for Coal Mining Industry and Organization of Work
SanPiN 2.2.3.757-99: Working with asbestos and asbestos-based materials
SanPiN 2.3.4.004-97: Sanitary rules and regulations for mini-bakeries of St. Petersburg.
SanPiN 2.3.4.050-96: Manufacturing and selling of fish products
SanPiN 2.3.4.545-96: Production of bread, cakes and confectionaries
SanPiN 2.3.4.551-96: Manufacturing of milk and milk products
SanPiN 2.3.4.704-98: Production of rectified ethyl spirits, liquor and vodka products
SanPiN 2.6.1.012-94: Production of consumer goods on the factories of the atomic industry
SanPiN 2640-82: Ordinance on Design and Operation of Sanitary Buffer Zones for Water Supply Sources and Potable/Nonpotable Water Supply Systems
SanPiN 42-129-11-3938-85: Sanitary Rules for Radioactive Waste Management (SPORO-85)
SanPiN 4616-88: Sanitary rules on occupational health of drivers of cars
SanPiN 5047-89: Sanitary rules on occupational health for shoe enterprises
SanPiN 5059-89: Sanitary rules for aircraft maintenance bases of civil aviation operating enterprises
SanPiN 5182-90: Sanitary rules for sewing production
SN 174-75: Instruction for industrial power supply design
SN 261-63: Guidelines for Designing Grain Stores and Elevators
SN 2963-84: Temporary sanitary norms and rules for the protection of the population from the effects of electromagnetic fields generated by radio engineering objects
SN 359-66: Guidelines for the design of buildings and structures for animals and rabbits
SN 369-74: Instructions on the calculation of the dispersion in the atmosphere of harmful substances contained in the emissions of enterprises
SNiP 2.01.28-85: Disposal areas for treatment and burial of toxic industrial wastes. Basic design provisions
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 2.09.03-85: Structures for industrial installations
SNiP 2.10.02-84: Agricultural Products Storage and Processing Facilities
SNiP 2.10.05-85: Organizations, buildings and structures used for storage and processing of grain
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SNiP II-12-77: Noise protection
SNiP II-B.7-70: Foundations of machines with dynamic loads
SNiP II-G.11-66: Gas Supply. Indoor Installations. Design Standards
SNiP II-G.12-65: Gas supply. Gas distribution stations. Balloon and tank installations of liquefied gas. Design Standards
SNiP II-L.5-68: Vocational schools. Design Standards
SNiP II-N.3-69: Livestock and poultry buildings and structures. Design Standards
SP 1009-73: Sanitary regulations for welding, weld deposition and metal cutting
SP 1042-73: Sanitary rules for the organization of technological processes and hygienic requirements for production equipment
SP 11-111-99: Development, coordination, approval and composition of the design and planning documentation for construction of low-rise residential construction
SP 1145-74: Sanitary Rules for Food Acid Production Enterprises
SP 2.2.1.1312-03: Occupational hygiene enterprise designing building reconstruction and maintenance. Hygienic requirements to the designing of new and reconstructible industrial enterprises
SP 2.5.1.1107-02: Hygienic Requirements for Working Conditions and Work Process Organization for Civil Air Traffic Controllers
SP 3.5.1378-03: Sanitation and Disease Control Regulations for Organization and Execution of Disinfecting Activity
SP 3.5.675-97: Hygienic requirements for institutions, organizations, companies and individuals involved in the disinfection activities
SP 3935-85: Sanitary regulations when working with lubricating fluids and technological lubricants
SP 4043-85: Sanitary regulations for coal industry enterprises
SP 4079-86: Sanitary regulations for manufacturers of drugs
SP 4695-88: Sanitary rules for refregirators
SP 4783-88: Sanitary regulations for the production of synthetic polymeric materials and enterprises for their processing
SP 4950-89: Sanitary regulations for the production of carbon-based materials (coal, graphitized, fibrous, composite)
SP 5183-90: Sanitary rules for foundry production (factories, workshops, sites)
SP 5206-90: Sanitary rules for catalyst production of the refining and petrochemical industries
SP 5788-91: Sanitary rules for wineries
SP 952-72: Sanitary rules for organization of processes of soldering small articles with alloys containing lead
SP 984-72: Sanitary rules for the device, equipment and maintenance of enterprises that manufacture phosphors and fluorescent lamps
SP 991-72: Sanitary regulations when painting using manual sprayers
SP AES-79: Sanitary rules for the design and operation of nuclear plants
SP LKP-91: Sanitary rules for the liquidation, conservation and reprofiling of enterprises for the extraction and processing of radioactive ores
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TU 2244-069-04696843-00: Energofleks. Foam Polyethylene Products. Technical Specifications
TU 26-06-976-77: Electropump units, centrifugal, cantilever type "K"
TU 34-10-10173-80: Mobile boiler room PKBM - 10
TU 3645-001-05693446-98: Installation of SGN-1 supersonic gas-plasma spraying coatings
TU 3645-033-05785477-98: Torch propane-oxygen for powder surfacing GN-5P
TU 6-05-1274-73: Insulating adhesive tape type-70 for VAZ cars
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VNTP 01/87/04-84: Objects of gas and oil industry, made with the use of block and block-complete devices. Engineering Design Standards
VNTP 01-86: Industrial-Specific Engineering Design Standards for Distribution Warehouses and Storage Facilities
VNTP 01-87: Guidelines for Process Design of Pasta Industry Facilities
VNTP 02-92: Norms of technological design of bakery industry enterprises. Part I. Bakeries
VNTP 02-92: Norms of technological design of bakery industry enterprises. Part II Bakeries
VNTP 03-86: Industry-Specific Engineering Design Standards for Cold-Storage Distribution Warehouses
VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices
VNTP 04-94k: Standards for technological design of enterprises for processing potatoes for starch
VNTP 10-5-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Volume 28. Ferroalloy plants
VNTP 10-91: Engineering Design Standards for Breweries
VNTP 12-79/Minsel'hoz SSSR: Norms of technological design of warehouses of solid mineral fertilizers and pesticides for collective farms, state farms and chemicalization points
VNTP 13-1-86/MChM SSSR: Standards for technological design of open-pit mining enterprises of ferrous metallurgy
VNTP 13-2-85: Standards for technological design of mining enterprises of metallurgy with underground mining method
VNTP 13-2-93: Norms of technological design of mining enterprises of metallurgy with underground mining method
VNTP 1-34-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 10. Oxygen Management
VNTP 17-5875-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Separate enterprises of metallurgical production. Volume 27. Coke-chemical enterprises
VNTP 19-86: Engineering Design Standards for Farm Federations, Farm Сooperatives, and Non-Family Farm Corporations for Production of Mixed Feed
VNTP 21-86: Standards for technological design of flotation plants for non-ferrous metal ores
VNTP 21-92: Standards for technological design of enterprises of the confectionery industry
VNTP 25-79: Norms of technological design of industrial water supply, sewage and wastewater treatment of oil refining and petrochemical industries
VNTP 2-86: Engineering design standards for crude oil transmission pipelines
VNTP 30-85: Norms of technological design of repair facilities of non-ferrous metallurgy enterprises
VNTP 35-86: Standards for technological design of mining enterprises of nonferrous metallurgy with an open method of development
VNTP 36-92: Standards of technological design of enterprises of the food concentrate industry
VNTP 3-77: Norms of technological design of facilities for the collection, transport, preparation of oil, gas and water of oil fields
VNTP 37-86: Standards for technological design of non-ferrous metallurgy mines with underground mining
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VNTP 51-1-88: Industry norms of technological design of Installations for Production and Storage of Liquefied Natural Gas, Isothermal Storages and Gas Filling Stations
VNTP 52-91: Departmental norms of technological design of warehouses of vegetable oils and fats of oil and fat enterprises
VNTP 5-85: Bookbinding and finishing production
VNTP 81: Engineering Design Standards for Thermal Power Plants (VSN 29-81)
VNTP 81-85: Norms of technological design for petroleum-refining and organic synthesis products manufacture enterprises
VNTP 9-1-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Metallurgical plants. Volume 11. Production of shielding gases
VNTP/MPS 85: Departmental norms of technological design. Devices of automation and telemechanics in railway transport.
VNTP-88: Departmental norms of technological design of washing and steaming stations
VRD 39-1.10-005-2000: Ordinance on Operation of Gas Distribution Stations of Trunk Gas Pipelines
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 169-80: Guidelines for Using Manual and Automated Welding in Shop-Fabrication of Structural Steel Components for Bridges
VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts
VSN 178-91: Standards for Planning and Executing Drilling and Blasting Operations in Roadbed Construction
VSN 182-91: Standards for Road Construction Material Surveying and the Design and Development of Near-Road Quarries for Road and Highway Construction
VSN 191-79: Guidelines for Machine Oxygen Cutting of Rolled Carbon and Low-Alloy Steel for Bridge Structures
VSN 196-83: Industry standards for the design of artificial lighting for the main shops of industrial enterprises of the Ministry of Transport
VSN 199-84: Designing and construction of temporary settlements of transport facilities constructors
VSN 214-82: Collected volume of instructions on rust-proofing
VSN 21-77: Instruction on designing of heating and ventilation systems at oil refinery and petrochemical plants
VSN 2-89: Rehabilitation and Development of Historical Districts of St. Petersburg
VSN 33-2.2.12-87: Irrigation and Drainage Systems and Structures. Pumping Stations. Design Standards
VSN 344-75: Guidelines for the Use of Polymeric Materials for Corrosion Protection and Repair of Industrial Smoke Stacks and Other Special Tall Reinforced Concrete Structures
VSN 345-86: Use of Epoxy-Shale Coatings for Waterproofing and Corrosion Protection of Steel Piping and Steel and Reinforced Concrete Structures of Industrial Occupancies and Sewage System Facilities
VSN 34-94 Russian Defense Ministry: Planning and development of military camps
VSN 35-94 Russian Defense Ministry: General Military Buildings
VSN 373-85: Organization of Tool Departments for Installation and Specialized Construction Contractors
VSN 51-03-78: Instructions for the design of pipelines for the transportation of liquefied hydrocarbons
VSN 52-89: Industry-Specific Design Standards for Office and Accessory Buildings and Rooms for Livestock and Poultry Raising Businesses
VSN 56-78: Design Guidelines for Railroad Stations and Terminals for USSR Railways
VSN 64-064-88: Instructions for the construction design of the medical and microbiological industry
VSN 64-97: Process Guidelines for Installation of Waterproofing and Reinforcement for Walls, Foundations, and Foundation Beds Using Polymeric Hydrophobic Compounds
VSTP 6.01-92: Sanitary requirements for the design of dairy enterprises
VSTP-6.02-92: Sanitary and veterinary requirements for the design of meat industry enterprises
Zh3-189: Recommendations for the development of the section of the project (working draft) "Protection of atmospheric air from pollution by harmful emissions of flue gases of boiler rooms
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
