imgalt

GOST 9.402-80

ГОСТ 9.402-80

Metal surface preparation for painting

Подготовка металлических поверхностей перед окрашиванием.

Status: Not effective - Superseded. IUS 9-2005

The standard applies to parts and assembly units made from ferrous, non-ferrous metals and alloys and establishes technical requirements for surface quality and technology for preparing the surface of products before painting.

Стандарт распространяется на детали и сборочные единицы из черных, цветных металлов и сплавов и устанавливает технические требования к качеству поверхности, технологию подготовки поверхности изделий перед окрашиванием.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 7/27/1980

SKU: RUSS20006

Price: $1,509.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.3 Products of paint and varnish industry »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.10 Surface preparation »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.10 Surface preparation »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T9 Unified system of protection against corrosion and aging of materials and products » T95 Paintwork and other polymer coatings »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Unified system of protection against corrosion and aging of materials and products (ESZKS) »


The Document is Replaced With:

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

As a Replacement Of:

GOST 9.025-74: Unified system of corrosion and aging protection. Coating of lacquers and paints. Preparation of metal surfaces before painting

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10651-75: Reagents. Ammonium phosphate tribasic 3-aqueous. Specifications

GOST 10652-73: Reagents. Dihydrate ethylenediaminetetraacetic acid disodium salt. Specifications

GOST 10678-76: Thermal orthophosphoric acid. Specifications

GOST 11088-75: Reagents. Magnesium nitrate hexahydrate. Specifications

GOST 11964-81: Fraction pig-iron and steel technical

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.3.005-75: Painting works

GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.4.004-74: Filtering protective mask RPG-67

GOST 12.4.013-85: Occupational safety standards system. Goggles. General specification

GOST 12.4.029-76: Special aprons

GOST 12.4.099-80: Women's overalls for protection against non-toxic substances, mechanical damage and general industrial contamination

GOST 12.4.100-80: Man's overalls for protection against non-toxic dust, mechanical effects and general industrial contaminations. Specifications

GOST 12.4.121-83: Industrial filtering gas-masks

GOST 12.4.131-83: Women’s smock-frocks

GOST 12.4.132-83: Overalls for men

GOST 12.4.137-84: Special leather footwear for protection from petroleum, petroleum products, acids, alkalis, non-toxic and explosive dust

GOST 12265-78: Rubber mold boots protecting from petroleum, petroleum products, and fats

GOST 13078-81: Sodium glass liquid. Technical conditions

GOST 13079-81: Sodium silicate soluble. Technical conditions

GOST 13493-86: Sodium tripolyphosphate. Technical conditions

GOST 1381-73: Hexamethylenetetramine for industrial use. Specifications

GOST 13937-86: Higher primary fatty alcohols C10-C18, C12-C16 fractions. Specifications

GOST 1412-85: Flakish graphite cast iron

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 15028-77: Alum aluminum-potassium technical. Technical conditions

GOST 1625-89: Formalin for industrial use. Specifications

GOST 16992-78: Zinc phosphate monosubstituted. Technical conditions

GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19906-74: Sodium nitrite technical. Technical conditions

GOST 20010-74: Industrial rubber gloves

GOST 201-76: Trisodium phosphate. Technical conditions

GOST 20490-75: Reagents. Potassium permanganate. Specifications

GOST 20848-75: Reagents. Potassium fluoride 2-aqueous. Specifications

GOST 2184-77: Sulphuric acid for industrial use. Specifications

GOST 22180-76: Reagents. Oxalic acid. Specifications

GOST 2263-79: Sodium hydroxide for industrial use. Specifications

GOST 22867-77: Reagents. Ammonium nitrate. Specifications

GOST 245-76: Reagents. Sodium dehydrogenate phosphate dehydrate. Specifications

GOST 2548-77: Chromic anhydride technical. Specification

GOST 2567-89: Technical hydrofluoric acid. Specifications

GOST 2874-82: Drinking water. Hygienic requirements and quality control

GOST 3117-78: Reagents. Ammonium acetate. Specifications

GOST 3134-78: White spirit

GOST 3351-74: Drinking water. Methods for determination of odor, taste, color and turbidity

GOST 342-77: Reagents. Sodium diphosphate, 10-aqueous. Specifications

GOST 3647-80: Abrasives. Grain sizing. Graininess and fractions. Test methods

GOST 3760-79: Reagents. Ammonia water. Specifications.

GOST 3765-78: Reagents. Ammonium molibdate. Specifications

GOST 3771-74: Reagents. Ammonium dihydrogen orthophosphate Specifications

GOST 3773-72: Reagents. Ammonium chloride. Specifications

GOST 3774-76: Reagents. Ammonium chromate. Specifications

GOST 380-88: Common quality carbon steel. Grades

GOST 380-94: Normal quality carbon steel

GOST 4111-74: Iron (III) nitric acid 9-water. Specification

GOST 4147-74: Reagents. Ferric chloride hexahydrate. Specifications

GOST 4148-78: Reagents. Ferrous (II) sulphate 7-aqueous. Specifications

GOST 4151-72: Drinking water. Method for determination of total hardness

GOST 4165-78: Reageuts. Copper II sulphate pentahydrate. Specifications

GOST 4168-79: Reagents. Sodium nitrate. Specifications

GOST 4197-74: Reagents. Sodium nitrite. Specifications

GOST 4199-76: Reagents. 10-aqueous sodium tetraborate. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4209-77: Reagents. Magnesium chloride 6-aqueous. Specifications

GOST 4217-77: Reagents. Potassium nitrate. Specifications

GOST 4220-75: Reagents. Potassium bichromate. Specifications

GOST 4233-77: Reagents. Sodium chloride. Specifications

GOST 4237-76: Reagents. Sodiumdichromate. Specifications

GOST 4245-72: Drinking water. Method for determination of chloride content

GOST 435-77: Reagents. 5-aqueous manganese sulphate (II). Specifications

GOST 4389-72: Drinking water. Methods for determination of sulfate content

GOST 4461-77: Reagents. Nitric acid. Specifications

GOST 4463-76: Reagents. Sodium fluoride. Specifications

GOST 4478-78: Reagents. Sulphosalicylic acid, 2-aqueous. Specifications

GOST 4518-75: Reagents. Ammonium fluoride. Specifications

GOST 4523-77: Reagents. Magnesium sulphate 7-aqueous. Specifications

GOST 4543-71: Structural alloyed steel

GOST 4919.1-77: Reagents and matters of special purity. Methods for preparation of indicators solutions

GOST 4919.2-77: Reagents and matters of special purity. Methods for preparation of buffer solutions

GOST 5100-85: Soda ash technical. Technical conditions

GOST 5106-77: Reagents. Zinc nitrate 6-aqueous. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5821-78: Reagents. Sulphanilic acid. Specifications

GOST 5823-78: Reagents. Zinc acetate 2-aqueous. Specifications

GOST 5845-79: Reagents. Potassium-sodium tartrate 4-aqueous. Specifications

GOST 5848-73: Reagents. Formic acid. Specifications

GOST 6552-80: Reagents. Orthophosphoric acid. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6968-76: Acetic acid produced

GOST 701-89: Concentrated nitric acid

GOST 83-79: Reagents. Sodium carbonate. Specifications

GOST 8429-77: Borax. Technical conditions

GOST 8433-81: Auxiliary substances OП-7 and OП-10. Specifications

GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST 9045-80: Low carbon cold-rolled quality steel sheets for cold stamping. Specifications

GOST 9307-78: Organic dyes. Alcohol soluble nigrosine. Specifications

GOST 9485-74: Reagents. Ferric sulphate 9-aqueous. Specifications

GOST 9546-75: Reagents. Ammonium fluoride (acid). Specifications

GOST 977-88: Steel castings. General specifications

GOST 9966-88: Technical triethylamine. Specifications

GOST 9976-83: Trichloroethylene technical

The Document is Referenced By:

GOST 10037-83: Autoclaves for building industry

GOST 10272-77: Double entry centrifugal pumps. Specification

GOST 10512-78: Magnetic and electromagnetic separators. Specification

GOST 10512-93: Magnetic and electromagnetic separators

GOST 10580-74: Foundry equipment. General specifications

GOST 10718-81: Hydrocyclones. Specification

GOST 11004-84: Principal ventilation mine blowers

GOST 11442-90: General-purpose axial fans

GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications

GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications

GOST 12367-85: Tube mills of grinding units. General technical specifications

GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications

GOST 12549-80: Passenger cars of mainline railways track 1520(1524) mm gauge. Painting. Technical requirements

GOST 13276-79: Overhead line hardware. General specifications

GOST 13816-80: Hydrant column. Specification

GOST 13950-91: Welded and folded steel barrels

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 15035-80: Underground scraper winches

GOST 15850-84: Mine parachutes for cages

GOST 15851-84: Suspension devices for mine cages

GOST 16215-80: Fork-lift trucks for general purposes

GOST 16349-85: Cyclic mixers for building materials

GOST 16528-87: Rectangular magnetic plates

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17519-87: Rectangular electromagnetic chucks

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 19597-94: Garden rakes

GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators

GOST 20481-80: Enamels MЛ-1110. Specifications

GOST 20548-87: Heating hot-water boilers with heating outputs

GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements

GOST 21029-75: Aluminum barrels for chemical products

GOST 21485-94: Flushing tanks with accessories. General specifications

GOST 22045-89: Overhead travelling single-beam cranes. Specifications

GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment

GOST 22584-88: Rope electric hoists. Specifications

GOST 22584-96: Electric rope hoists

GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications

GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications

GOST 23067-78: Electric heating equipment for public catering establishments. General specifications

GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications

GOST 23118-78: Structural metalwork. General specifications

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 23173-78: Garden barrows. General technical conditions

GOST 23173-96: Garden wheel barrows

GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 23707-95: Small tools for tillage

GOST 23846-79: Refrigerator cores for main railways of 1520 (1524) mm gauge. Paint coatings. Specifications

GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties

GOST 24258-88: Different types of scaffolding. General specifications

GOST 24568-81: Magnetic chucks. Specifications

GOST 24595-81: Primer B-MЛ-0143. Specifications

GOST 25088-98: Ship's doors. Specifications

GOST 25309-94: Covers of access hatches. Specifications

GOST 25310-94: Covers of skylights. Specifications

GOST 25483-82: Garden watering-pots. Specifications

GOST 25483-95: Garden watering pots

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 26155-84: Barrels from corrosion-resistant steel

GOST 26220-84: Aerosol aluminum mono-block bulbs

GOST 26698.1-93: Rigs for blast-holes drilling in open-cast mining works

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications

GOST 27590-88: Water heaters for heat supply systems

GOST 27890-88: Decontaminable protective coatings (paints). Adhesion determination by normal pull-off method

GOST 27953-88: Detonation coatings. General requirements

GOST 28328-89: Round electromagnetic chucks

GOST 28434-90: Overhead travelling stacker cranes

GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control

GOST 28679-90: Steam-water heaters for heat supply systems

GOST 28844-90: Thermal sprayed coatings strenghtive and reductive. General requirements

GOST 29130-91: Protective decorative coating accessories for products of light industry. General requirements

GOST 29168-91: Building mast freight hoists

GOST 30273-98: Circular and rectangular electromagnetic chucks. General specifications

GOST 30662-99: Rust converters. Methods of tests of paint coatings protective properties

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30766-2001: Tins for chemical products. General specifications

GOST 30777-2001: Turned, reclined and turned-reclined devices for windows and balcony doors. Specifications

GOST 31173-2003: Steel doors. Specifications

GOST 31174-2003: Gates of metall. General specifications

GOST 33171-2014: Hoisting cranes. Metallurgical and special cranes. General specifications

GOST 5105-82: Steel fuel and oil tanks

GOST 538-2001: Locks and building hardware. General specifications

GOST 538-88: Lock and building hardware

GOST 5534-79: Floating cranes. Specifications

GOST 6113-84: Horizontal expellers for pottery ware

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6572-91: Paint Coatings Of Tractors And Agricultural Machinery General Specifications

GOST 6625-85: Mine local ventilating fans

GOST 6937-81: Conic crushers. Specification

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7600-90: Press-forging plant

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

GOST 8220-85: Underground fire hydrants. Specifications

GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control

GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production

GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking

GOST 9.315-91: Unified system of corrosion and ageing protection. Hot-dip aluminium coatings. General requirement and methods of checking

GOST 9.401-79: Unified system of protection against corrosion. Coatings for paintwork intended for use in areas with tropical climate. General technical requirements and methods of accelerated testing

GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing

GOST 9.408-86: Unified system of corrosion and ageing protection. Paint coatings. Accelerated corrosion test for resistance in storage conditions

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST 9.514-99: Unified system of corrosion and ageing protection. Corrosion inhibitors of metals for water systems. Electrochemical method protective ability evaluation

GOST 9231-80: Twin-shaft blenders of paddle type

GOST 9274-81: Rolls for stone separating and ceramic mixture grinding

GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)

GOST ED1 22827-86: General-purpose self-propelled boom cranes. Specifications. Export addition

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods

GOST R 50941-96: Booth for the defence. General technical requirements and methods of testing

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51163-98: Thermodiffusion zinc coatings on fasteners and other small products. General requirements and control methods

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51222-98: Equipment for bank protection. Venetian blinds. General specifications

GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51693-2000: Anticorrosion primers. General specifications

GOST R 51763-2001: Well sucker rod pump drives. General technical requirements

GOST R 52018-2003: Shaft sinking hoppets. Specifications

GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods

GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures

Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures

Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures

Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MGSN 5.02-99: Design of Urban Bridge Structures

MR 502.1-05: Guidelines for mounting connections on high-strength bolts coated with contact surfaces with friction primers in steel structures of bridges

NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods

NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods

NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods

NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

ONTP 03-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Paint Shops

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 24.191.08-81: Hook crane suspensions. Design and dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.940.01-90: Welded steel structures. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1183-82: Aluminium vessels and devices. General technical specifications.

OST 26-07-2065-85: Quality control program for nuclear thermal power plant special fittings.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 34-29-582-82: Protective coating for steel structures of high-voltage substation overhead power line supports and open junction boxes by hot tinning method. Technical requirements. Acceptance rules and inspection methods.

OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.

OST 36-62-81: Hoisting equipment. General technical requirements.

OST 48-286-86: Single-stage Thickeners. Specifications.

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

OST 92-1586-89: Marking paints. General requirements for selection, preparation and laying.

OST 92-9440-81: Conducting lacquer coating. Technical requirements and typical technological processes.

OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PB 10-11-92: Installation and Safe Operation Requirements for Hoists (Hoisting Towers)

PB 10-256-98: Regulations on design and safe operation of hoists (derricks)

RD 02-01297858-00: Instructions for external insulation of shaped pipeline fittings and valve units with protective polyurethane coating of COPON HYCOTE type, produced by Company 165 E. WOOD, England.

RD 12-86-95: Procedural Guidelines for Supervision of Organizations Engaged in Activities Related to Electrochemical Protection to Underground Gas Pipelines

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.0-20.518-2003: Standard instructions on protection of heat supply system pipelines against external corrosion

RD 153-34.0-21.524-98: Typical instruction for metal chimney shafts of electric utilities.

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 22-207-88: Lifting machines. General requirements and production standards

RD 24.202.03-90: Weatherproof lacquer coating for oil and gas processing equipment. Technical requirements.

RD 24.207.05-90: Pipe fittings. Adhesives and sealants. Stamps Basic parameters and conditions of use

RD 24-207-05-90: Pipe fittings. Adhesives and sealants. Stamps. Basic parameters and conditions of use

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26-02-63-87: Technical requirements for designing and manufacturing of vessels, vehicles and technological blocks installations of oil and gas, operating environments, causing hydrogen sulphide stress corrosion cracking.

RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions

RD 31.25.01-83: Rafts for outboard work. Design and Operations Requirements

RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990

RD 31.44.05-80: Crane metalwork. Repairs. Technical specifications

RD 34.21.526-95: Model Guidelines for Operation of Metal Tanks for Storage for Liquid Fuel and Hot Water

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 3661-01297858-02-01: Instructions for complex corrosion protection of storage tanks for petroleum and petroleum products materials company "Ameron", USA

RD 3661-01297858-03-01: Guidelines for corrosion protection of petroleum and oil reservoirs using one-component polyurethane paint coatings

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 37.009.015-98: Methodological guide for determining the cost of motor vehicles, taking into account natural wear and technical condition at the time of presentation

RD 39-0147103-328-86: Process Guidelines for Application of Polymer Protective Coatings on the Interior Surface of Field Water Pipes Used for Transport of a Medium Containing Sulfur (Up to 100 mg/liter)

RD 39-30-1333-85: Guidelines for corrosion protection by coatings on the outer surface of field pipelines in permafrost areas in Western Siberia

RD 39-30-657-81: Guidance on the mechanochemical preparation of the inner surface of pipelines for protective coatings applied in the field

RD 413160-02-01297858-03: Corrosion protection rules for stock-tank oil vessels and for dynamic and technological oil settling vessels

RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries

RD 50-703-91: Instructions. The basic supporting structures of electronic equipment. Technological requirements

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RSN 40-81: Instructions for use of organosilicate compositions for corrosion protection of metal and other building structures, process equipment and decoration finishes of the building materials and facades of buildings

RST RSFSR 516-88: Eaves metal. Technical conditions

SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion

SNiP 3.06.04-91: Bridges and pipes

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SP 120.13330.2012: Subway systems

SP 32-105-2004: Subways

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines

SP 42-103-97: Renovation of steel underground gas pipelines used synthetic flexible pipes and complicated adhesiyes

SP 53-101-98: Manufacturing and quality control of steel structures for construction

ST RK 1489-2005: Fire fighting equipment. Fire extinguishing aerosol generators. General technical requirements. Test methods

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

STN TsE 141-99: Design norms for contact network

TsPI 6/32: Technological indications of the coloring of metal structures of railway bridges in operation

TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings

TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 102-416-86: Garage reinforced concrete prefabricated for individual use

TU 102-425-86: A set of structures for the building of crane (crane) with structures frame production span of 12 and 18M

TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use

TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m

TU 102-541-89: Garage assembly individual use of ash and slag concrete

TU 102-587-91: Production-auxiliary box

TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use

TU 14-3R-37-2000: Steel electric-welded longitudinal pipes with a diameter of 102–1220 mm with an external protective coating based on extruded polyethylene. Technical conditions

TU 2245-024-82119587-2007: Thermal protective tape "Terma". Technical conditions

TU 24.09.683-88: Cabin crane unified KKU

TU 24-09.411-82: Special electric bridge cranes

TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist

TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions

TU 34-38-20120-94: Pipelines of station thermal stations. General technical conditions for major repairs

TU 34-38-20135-94: Tubular air heaters of stationary boilers. Technical conditions for major repairs

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20189-94: Gas-oil burners for steam stationary boilers. Technical conditions for major repairs

TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-38-20201-94: Stationary steam boilers. Piping within the boiler. General technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

TU 35-1385-81: Span metal railway buildings with riding on top 18.2 - 33.6 m

TU 36.26.11.01-06-92: Windows and bindings of light emitting lamps. Technical conditions

TU 3612-005-00220302-98: Shell-and-tube heat exchangers for special purposes. Thermosiphon evaporators. Technical conditions

TU 3612-007-00220302-99: Shell-and-tube heat exchangers for special purposes. Vacuum capacitors. Technical conditions

TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions

TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases

TU 36-2370-82: Slatted welded floor type "Visp"

TU 36-26-11-4-89: Steel building construction, vertical cylindrical tanks for oil and petroleum products with a volume of 100 to 50,000 m3. Technical conditions

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 5764-011-01297858-99: Steel pipes with thermal insulation from polyurethane foam. Technical conditions

TU 576431-006-01297858-99: Heat-hydro-insulated pipes with thermal insulation made of polyurethane foam. Technical conditions

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

VSN 345-86: Use of Epoxy-Shale Coatings for Waterproofing and Corrosion Protection of Steel Piping and Steel and Reinforced Concrete Structures of Industrial Occupancies and Sewage System Facilities

VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III

VSN 362-87: Disinfections and Etching of Pipelines

VSN 436-82: Guidelines for Application of Organosilicate Composites for Protective Coatings for Steel Piping of Piped Heat Distribution Systems

VSN 446-84: Guidelines for Use of Paints and Coatings for Factory-Applied Corrosion Protection of Structural Steel

VSN 454-84: Guidelines for Use of Isol [Rubber-Bitumen Roll Waterproofing Material] for Corrosion Protection for Steel Piping of Piped Heat Distribution Systems

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English
Price: $191.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!