SNiP 2.01.01-82
СНиП 2.01.01-82
|
|
Construction climatology and geophysics
Строительная климатология и геофизика
Status: Not effective - Superseded
Standards should be observed when developing master plans for cities, towns, rural settlements, designing buildings and structures, choosing materials for structures, designing heating, ventilation, air conditioning, water
Нормы должны соблюдаться при разработке генеральных планов городов, поселков, сельских населенных пунктов, проектировании зданий и сооружений, выборе материалов для конструкций, проектировании систем отопления, вентиляции, кондиционирования воздуха, водоснабжения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
7/21/1982
SKU: RUSS20009
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.10 Thermal insulation of buildings »
The Document is Replaced With:
TSN 23-301-97: Building Climatology for Localities in Nizhegorod Region
As a Replacement Of:
SNiP II-A.6-72: Construction climatology and geophysics
The Document is Referenced By:
Disposition 79-r: Methodology for Calculated Prediction of Service Life of Reinforced Concrete Spans of Road Bridges
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13580-85: Reinforced concrete slabs for strip foundations. Specifications
GOST 17608-91: Footway concrete slabs. Specifications
GOST 19231.0-83: Reinforced concrete slabs for tramway track pavements. Specifications
GOST 21506-87: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21924.0-84: Reinforced-Concrete Slabs for Urban Road Pavements. Specifications
GOST 21924.1-84: Pre-stressed reinforced-concrete slabs for urban motorway pavements. Design and dimensions
GOST 21924.2-84: Reinforced concrete slabs of unstressed fittings for pavements of city roads. Structure and dimensions
GOST 22687.0-85: Racks reinforced concrete centrifuged for supports of high-voltage power lines. Technical conditions
GOST 22687.1-85: Racks are conical reinforced concrete centrifuged for high-voltage power transmission towers. Design and dimensions
GOST 22687.2-85: Racks cylindrical reinforced concrete centrifuged for high-voltage power transmission towers. Design and dimensions
GOST 22853-86: Mobile buildings. General specifications
GOST 24893.0-81: Reinforced concrete frame brace for industrial buildings. Specifications
GOST 25697-83: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 25912.0-91: Reinforced concrete slabs for aerodrome pavement
GOST 25912.4-91: Structure fittings and mountings products of reinforced concrete slabs for aerodrome pavement. Construction
GOST 26071-84: Racks of ferro-concrete, vibrated for supports of overhead power lines 0,38 kV. Specification
GOST 26519-85: Reinforced concrete structures of buried rooms with a beam-type ceiling. Specification
GOST 26992-86: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications
GOST 27108-86: Reinforced concrete framework structures for multi-storeyed industrial buildings with floors without beams. Specifications
GOST 27215-87: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications
GOST 27563-87: Gypsum concrete building blocks for buildings of up to two storeys high. Specifications
GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST 8717.0-84: Reinforced concrete and concrete steps. Specifications
GOST R 51617-2000: Services living conditions and public utilities. General specifications
GOST R 51617-2014: Services of housing maintenance, public utilities and administration of apartment buildings. Public utilities services. General requirements
GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
ITP 31-87: Instructions for the technological design of enterprises for the production of perfumery products
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 1.04.03-85: A guide to determining the duration of the construction of enterprises, buildings and structures
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
Manual for SNiP 2.01.01-82: Reference manual to SNiP. Construction climatology and geophysics
Manual for SNiP 2.02.01-83: Manual on the design of protection of mine workings from underground and surface waters and water reduction during the construction and operation of buildings and structures
Manual for SNiP 2.02.01-83: Guide to designing the foundations of buildings and structures
Manual for SNiP 2.03.04-84: A guide for the design of concrete and reinforced concrete structures designed to work in conditions of exposure to elevated and high temperatures
Manual for SNiP 2.03.09-85: Design of asbestos-cement structures
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.05-86: Manual for the design of automated climate control systems for industrial buildings
Manual for SNiP 2.04.05-91: Benefit 3.91. Fan units
Manual for SNiP 2.04.05-91: Benefit 2.91. Calculation of the receipt of heat of solar radiation in the premises
Manual for SNiP 2.04.05-91: Allowance 13.91. Fire protection requirements for heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Benefit 8.91. The number of personnel operating heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Allowance 12.91. Recommendations for calculating outdoor air infiltration in one-story industrial buildings
Manual for SNiP 2.04.05-91: Benefit 9.91. Annual energy consumption by heating, ventilation and air conditioning systems
Manual for SNiP 2.04.05-91: Manual 10.91 Designing Corrosion Protection
Manual for SNiP 2.04.05-91: Manual 1.91 Calculation and Distribution of Supply Air
Manual for SNiP 2.04.05-91: Manual 4.91. Smoke protection in case of fire
Manual for SNiP 2.04.05-91: Allowance 14.91. New schemes and solutions for smoke protection of staircase elevators of multi-storey buildings
Manual for SNiP 2.04.05-91: Allowance 15.91. Smoke protection in case of fire and ventilation of underground car parks
Manual for SNiP 2.04.05-91: Benefit 5.91. Placement of ventilation equipment.
Manual for SNiP 2.04.05-91: Benefit 7.91. Duct layouts in a building
Manual for SNiP 2.04.05-91: Allowance 6.91. Fire resistant ducts.
Manual for SNiP 2.05.03-84: Guide to SNiP 2.05.03-84 "Bridges and pipes" for the survey and design of railway and road bridge crossings through waterways (PMP-91)
Manual for SNiP 2.05.07-85: Manual on the design of railways and roads of industrial enterprises in permafrost areas (to SNiP 2.05.07-85)
Manual for SNiP 2.05.07-85: Cable Car Design Toolkit
Manual for SNiP 2.05.07-85: Guide for the design of subgrade and drainage of railways and roads of industrial enterprises
Manual for SNiP 2.05.07-85: Hydraulic Vehicle Design Guide
Manual for SNiP 2.05.07-85: A guide to determining the integrated technical and economic indicators of the cost of construction for comparing options and choosing types of industrial transport
Manual for SNiP 2.05.07-85: Guide for the design of conveyor transport. Conveyor belts
Manual for SNiP 2.05.07-85: Design Guide for Industrial Rail Stations
Manual for SNiP 2.06.08-87: A guide for the design of concrete and reinforced concrete structures of hydraulic structures (without prestressing)
Manual for SNiP 2.07.01-89: A guide for the design of urban (local) telephone networks and wired broadcast networks of urban and rural settlements. Dispatching engineering equipment systems
Manual for SNiP 2.07.01-89: Water and Sewerage Manual for Urban and Rural Settlements
Manual for SNiP 2.07.01-89: Power supply of settlements
Manual for SNiP 2.07.01-89: Heat and gas supply of settlements
Manual for SNiP 2.08.01-89: Heating and ventilation of residential buildings
Manual for SNiP 2.08.01-89: Design of residential buildings. Space-planning solutions
Manual for SNiP 2.08.02-89: Design of catering facilities
Manual for SNiP 2.08.02-89: Designing Higher Educational Institutions and Continuing Education Institutions
Manual for SNiP 2.08.02-89: Designing consumer services enterprises
Manual for SNiP 2.08.02-89: Design of vocational, secondary special educational institutions and educational combines
Manual for SNiP 2.08.02-89: Design of kindergartens
Manual for SNiP 2.08.02-89: Design of warning and evacuation systems for people during fires in public buildings
Manual for SNiP 2.08.02-89: Health Facility Design Guide
Manual for SNiP 2.08.02-89: Club Design
Manual for SNiP 2.08.02-89: Pool Design
Manual for SNiP 2.08.02-89: Design of educational complexes and centers
Manual for SNiP 2.08.02-89*: Theater Design
Manual for SNiP 2.08.02-89*: Design of gyms, facilities for fitness classes and indoor ice rinks with artificial ice
Manual for SNiP 2.08.02-89*: Retail Design
Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls
Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment
Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines
Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide
Manual for SNiP 2.09.03-85: Design of open crane overpasses
Manual for SNiP 2.10.04-85: Greenhouse and Greenhouse Design Guide
Manual for SNiP 2.10.05-85: Manual on the design of enterprises, buildings and structures for the storage and processing of grain
Manual for SNiP 3.01.01-85: A guide to the development of projects for the organization of the construction of large industrial complexes using the nodal method
Manual for SNiP 3.01.01-85: A guide for the development of construction organization projects and civil works construction projects
Manual for SNiP 3.01.01-85: Manual on the development of construction projects and agricultural production projects
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for the reconstruction of existing enterprises, buildings and structures. Reference manual to SNiP
Manual for SNiP 3.01.01-85: Development of projects for the organization of construction and work projects for industrial construction
Manual for SNiP 3.01.01-85: A guide for the organization of high-speed construction of roads and airfields using sets of machines of the DS-100 type
Manual for SNiP II-22-81: Design and application of panel and brick walls with various types of cladding. Reference manual to SNiP
Manual for SNiP II-22-81: Manual for the design of stone and reinforced stone structures
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
Manual for SNiP II-4-79: Manual for the calculation and design of natural, artificial and combined lighting
MDS 11-3.99: Recommended Practice for Conformity Assessment of Feasibility Studies (Projects) for Construction of Nonindustrial Facilities
MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures
MDS 11-5.99: Procedure Guidelines On The Expert Appraisal of Engineering Survey for the Feasibility Study (Projects, Draft Projects) of the Construction Units
MDS 13-12.2000: Recommended Practice for Developing Standards for Consumption of Public Utility Services
MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies
MDS 41-3.2000: Recommended Management and Procedural Practice for the Use of Public Piped Heat Supply Systems in Cities and Other Populated Areas in the Russian Federation
MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer
MDS 81-43.2008: Guidelines for determining the costs associated with the construction and installation works on a rotational basis
Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities
Methodical manual: Hotel building design
Methodical manual: Classification methods of information modeling tasks
Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation
Methodical manual: Building Design for Refrigerators
MGSN 1.01-98: Part 2: Interim Urban Development Code of the City of Moscow
ND p.4.2 SPPNAE-93: Basic Requirements for Development of Feasibility Studies for Nuclear Power Plant Construction - Ordinance on Procedure for Selection of Construction Site
NTP 10-95: Engineering Design Standards for Greenhouses and Hothouses for Growing Vegetables and Seedlings
NTP 18-91: Standards of technological design of seasonal agricultural production
NTP TsTKS-FZhT-2002: Standards for technological design of digital telecommunication networks in the federal railway transport
NTP-APK 1.10.01.001-00: Engineering Design Standards for Cattle Farms
ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads
OND-86: Methodology for calculating atmospheric concentrations of harmful substances contained in enterprise emissions
ONTP 02-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Woodworking Shops
ONTP 07-85: All-Union norms for the technological design of precast concrete enterprises
ONTP 1-86: All-union regulations of technological engineering of liquefied petroleum gas extraction plants
ONTP 18-85: All-Union Norms of Technological Design of Nonmetallic Building Materials Enterprises
ONTP 51-1-85: National Engineering Design Standards. Trunk Pipelines. Part I: Gas Pipelines
ORD 14.370-44-87: Guidelines for the design of oxygen facilities in metallurgical plants
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
PB: Safety regulations and industrial sanitation for loading and unloading operations on railway transport
PB: Safety regulations and industrial sanitation for the repair and maintenance of railway tracks and structures
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 08-342-00: Safety regulations at production, storing and delivery of liquefied natural gas at gas distribution stations of gas main pipelines (GDS GMP) and car gas-filling compressor stations
PB 09-12-92: Rules on the flare system design and safe operation
PB 09-220-98: Installation and Safe Operation Requirements for Ammonia-Based Refrigeration Equipment
PB 09-322-99: Safety Requirements for Production, Storage, Transportation, and Use of Chlorine
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 10-14-92: Codes for installation and safe operation of lifting cranes
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
PNAE 4.1-87: Basic Provisions on Scope and Volume of Surveys for Selection of a Nuclear Power Plant Site (SPPNAE-87 Section 4.1)
PNAE G-05-035-94: Considerations external actions of natural and anthropogenic nature on nuclear and radiation hazardous objects
POT R M-007-98: Industry-Wide Occupational Safety and Health Requirements for Freight Loading/Offloading and Placement Operations
POT R M-014-2000: Intersectoral Occupational Safety Rules
POT R O-95120-001-94: Rules of labor protection at retailers
POT R O-97300-07-95: Rules for labor protection in the production of alcohol and alcoholic beverages
POT RO-32-TsP-652-99: Rules for labor protection during the maintenance and repair of railway tracks and structures
R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry
R 536-84: Recommendations for the design of thermal insulation structures of trunk pipelines
R 615-87: Recommendations for the technical equipment of the column for the construction and maintenance of winter roads during the construction of trunk pipelines on permafrost
RD 12.13.028-85: The methodology for choosing the optimal heat supply schemes in the construction of mines
RD 12.13.53-86: Guidelines for the design of the organization of the construction of the mine using electronic computers
RD 153-34.1-09.206-2001: Specified Quantity Allowances for Electric Power and Heat for Defrosting Solid Fuel During Offloading
RD 153-34.1-20.528-2001: Recommended Practice and Example of Calculation of Energy Characteristics of Piped Hot Water Heat Supply Networks According to System Water Losses Indicator
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
RD 153-34.3-20.662-98: Model Guidelines for Maintenance of and Repair of Overhead Electric Power Transmission Lines at Voltage of 0.38-20 kV with Uninsulated Conductors
RD 153-39.0-112-2001: Method for the Determination of Specified Quantity Allowances for Natural Gas for Process Needs of a Trunk Gas Transport Pipeline
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 31.31.25-85: Guidelines for Design of Wharf Structures for Arctic Conditions
RD 31.31.52-89: Recommendations for the design, construction and operation of ice berthing facilities
RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures
RD 34.21.142: Guidelines for the Design of Steel Pipelines for Hydraulic Structures
RD 34.21.363-95: Procedural Guidelines for Inspection of Production Buildings and Structures at Thermal Power Plants Under Rehabilitation
RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 39-135-94: Norms for technological design of gas-processing plants
RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 107: Provisional Regulations on the composition of measures to prevent emergencies in the special section "Engineering and technical measures of civil defense. Measures to prevent emergencies" of urban planning documentation of Moscow
Resolution 82: Temporary norms and rules for the planning and development of the city of Moscow. Consolidated edition (not valid)
RM 4-242-92: Automation systems. Recommendations for the design of heating and thermal insulation of pipe wiring
RM 62-91-90: Calculation procedure for air pollutant emissions from petrochemical equipment
RSN 58-86: Guidelines for design of panel exterior walls of residential buildings for the north building and climatic zone
RSN 68-87: Design of industrial and civil buildings of the West Siberian oil and gas complex
RSN-88: Design and Construction of Roads and Highways in Non-Chernozem Areas of the RSFSR
RTM 38.001-94: Guidelines for the calculation of strength and vibration of technologically steel pipe.
RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements
RTM 6.030-1-87: Large systems of community TV reception
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
SanPiN 4616-88: Sanitary rules on occupational health of drivers of cars
Series 1.015.1-1.95: Issue 2. Beams prefabricated. Directions for use
Series 1.015.1-1.95: Issue 2. Beams prefabricated. Directions for use
Series 1.800.9-8: Enclosures made of metal three-layer panels for buildings of seed potato storage with a capacity of 1 thousand tons, vegetable stores with a capacity of 3 thousand tons and fruit storage with a capacity of 1 thousand tons
Series 1.800.9-8: Issue 0. Directions for use. Nodes Working drawings
Series 1.800.9-8: Issue 1. Panels, components. Working drawings
SN 481-75: Instruction on design, installation and operation insulating glass units
SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
SNiP 2.02.04-88: Bases and foundations on the permafrost soils
SNiP 2.03.01-84: Concrete and reinforced concrete structures
SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing
SNiP 2.03.02-86: Concrete and reinforced concrete structures of dense silicate concrete
SNiP 2.03.04-84: Concrete and reinforced concrete structures designed to operate under elevated and high temperatures
SNiP 2.03.06-85: Aluminium structures
SNiP 2.03.09-85: Design of asbestos cement structures
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 2.05.03-84*: Bridges and pipes (Appendices 1-20)
SNiP 2.05.03-84*: Bridges and pipes (Appendices 21-29)
SNiP 2.05.11-83: Access Roads Operated by Farm Сooperatives, Non-Family Farm Corporations, and Other Agricultural Enterprises and Organizations
SNiP 2.06.08-87: Concrete and reinforced concrete structures of hydro engineering facilities
SNiP 2.06.15-85: Inundation & under-flooding. Area protection engineering
SNiP 2.08.01-85: Manual on design of residential buildings. Issue 3. Part 2. Structures of residential buildings
SNiP 2.09.03-85: Structures for industrial installations
SNiP 2.10.04-85: Manual on design of greenhouses
SNiP 2.10.05-85: Organizations, buildings and structures used for storage and processing of grain
SNiP 2.11.02-87: Refrigerators
SNiP 22-01-95: Geophysics of hazard natural process
SNiP 3.06.04-91: Bridges and pipes
SNiP 32-03-96: Aerodromes
SNiP II-11-77: Civil defense protective facilities
SO 153-34.48.519-2002: Rules for design, construction and operation of fiber-optic communication lines on overhead power lines with voltage of 0.4-35 kV
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SP 11-107-98: Procedure of Development and Composition of the “Engineering and Technical Measures of Civil Defense. Measures for Prevention of Emergencies” Section of Construction Projects
SP 11-113-2002: The reporting on the engineering civil defence measures and activities to prevent emergencies in the preparation of an application of intent to invest in the construction and justification of investment in the construction of enterprises, buildings and structures
SP 115.13330.2011: Geophysics of hazard natural process
SP 121.13330.2011: AERODROMES
SP 30-102-99: Planning and construction of low-rise housing construction territories
SP 32-101-95: Design and installation of the foundations of bridges in areas with permafrost
SP 32-104-98: Design of earthwork for railways with 1520 mm track
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 42-101-96: Design and construction of polyethylene gas pipeline up to 300 mm in diameter
STN Ts 01-95: 1520-mm Gauge Railways
STN TsE 141-99: Design norms for contact network
TR 80-98: Recommended Practice for Concrete Laying Process by Unheated Method of Cast-in-Place Structures Using Thermos and Accelerated Thermos
TSN 22-308-98: Engineering survey, design, construction and operation of buildings and structures in the karst territories of the Nizhny Novgorod region
TSN 23-301-97: Building Climatology for Localities in Nizhegorod Region
TSN 23-304-99: Energy Conservation in Buildings. Requirements for Thermal Insulation and Heat, Water, and Electricity Supply
TSN 23-305-99: Energy efficiency in residential and public buildings. Standards for thermal protection of buildings. Saratov region
TSN 23-306-99: Thermal protection and energy consumption in residential and public buildings
TSN 23-307-00: Energy efficiency in residential and public buildings. Standards for thermal protection of buildings. Ivanovo region
TSN 23-310-2000: Energy efficiency in residential and public buildings. Standards for thermal protection of buildings. Belgorod region
TSN 23-312-2000: Thermal protection of residential and public buildings. Thermal Protection Standards. Vladimir region
TSN 23-320-2000: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Chelyabinsk region
TSN 301-23-2000-JaO: Thermal protection of buildings for civil purposes
TSN 30-304-2000: City of Moscow Planning and Development Code
TSN 31-318-99: Buildings, Structures, and Building Complexes for Mortuary Purposes
TSN 41-302-2000: Heating, Ventilating, and Air-Conditioning Systems
TSN 50-301-96: Design of foundations and foundations of buildings and structures erected in the areas of permafrost soils. Komi Republic.
TSN 50-303-96 NN: Foundations and foundations of buildings and structures in the alluvial territories of the Nizhny Novgorod region
TSN KR-97 MO: Roofing. Technical requirements and acceptance rules
TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)
TU 102-465-88: Rack reinforced concrete vibrated CB 90-3.2 for supports VL 6 - 10 kV
TU 34-12-11410-89: Racks of reinforced concrete CB95-1, CB95-1-a, CB95-2, CB95-2-a
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VNP-001-95: Departmental design standards. Buildings of institutions of the Central Bank of the Russian Federation
VNTP 01-87: Guidelines for Process Design of Pasta Industry Facilities
VNTP 03-86: Industry-Specific Engineering Design Standards for Cold-Storage Distribution Warehouses
VNTP 05-89/MPS Rossii: Definition of the categories of premises and buildings for industrial and storage purposes of enterprises and railway transport facilities in terms of explosion and fire hazard
VNTP 05-97: Definition of categories of premises and buildings of enterprises and objects of railway transport according to explosion and fire hazard
VNTP 112-92: Volume 1: Municipal and Rural Telephone Networks
VNTP 13-2-93: Norms of technological design of mining enterprises of metallurgy with underground mining method
VNTP 19-86: Engineering Design Standards for Farm Federations, Farm Сooperatives, and Non-Family Farm Corporations for Production of Mixed Feed
VNTP 2 KH-93: Engineering Design Standards for Hog Farms
VNTP 20-86: Industry-Specific Engineering Design Standards for Ceramics Industry Facilities. Ceramic Plumbing Fixtures Manufacturing
VNTP 21-92: Standards for technological design of enterprises of the confectionery industry
VNTP 2-86: Engineering design standards for crude oil transmission pipelines
VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities
VNTP 36-92: Standards of technological design of enterprises of the food concentrate industry
VNTP 4-00: Determination of explosion and fire hazard classes of premises, buildings and outdoor installation of oil products pipeline transportation facilities
VNTP 81-85: Norms of technological design for petroleum-refining and organic synthesis products manufacture enterprises
VNTP/MPS 85: Departmental norms of technological design. Devices of automation and telemechanics in railway transport.
VNTP-88: Departmental norms of technological design of washing and steaming stations
VRD 39-1.13-038-2001: Industry-specific rationing of nitric oxide emissions from gas transmission companies, taking into account the transformation of NO-NO2 in the atmosphere
VSN 014-89: Construction of Trunk and Field Pipelines. Environmental Protection
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 137-89: Design, construction and maintenance of winter motor roads in Siberia and North-East of the USSR
VSN 168-76/MMSS USSR: Instructions for the calculation and design of heat-insulating structures of pipelines, heated by steam and water satellites
VSN 199-84: Designing and construction of temporary settlements of transport facilities constructors
VSN 205-87: Design of Clay Soil Railway Roadbed Using Geotextile
VSN 29-85: Design of Shallow Foundations for Low-Rise Buildings Constructed in Heaving Soils in Rural Areas
VSN 33-2.2.06-86: Irrigation and Drainage Systems and Structures. Irrigation Systems on Subsiding Soils. Design Standards
VSN 33-2.2.12-87: Irrigation and Drainage Systems and Structures. Pumping Stations. Design Standards
VSN 34.72.111-92: Engineering Surveys for the Design of Thermal Power Plants
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 41.88: Design of ice-resistant stationary platforms
VSN 51-88: Guidelines for Widening Road Bridges and Overpasses
VSN 84-89: Motor road survey, design, and construction in permafrost areas
VSN AV-PAS-94: Bus stations and passenger bus stations
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.