Rules for arrangement and safe operation of steam and hot water piping
Правила устройства и безопасной эксплуатации трубопроводов пара и горячей воды
Status: Not effective - Superseded
Standards for assessing the quality of welded joints establish the basic requirements for assessing the quality of welded joints working under pressure and made by arc, electroslag, electron-beam and gas welding, with visual, measuring, capillary, magnetic powder, radiographic and ultrasound testing, as well as mechanical testing and by metallographic examination
Нормы оценки качества сварных соединений устанавливают основные требования к оценке качества сварных соединений, работающих под давлением и выполненных дуговой, электрошлаковой, электронно-лучевой и газовой сваркой, при визуальном, измерительном, капиллярном, магнитопорошковом, радиографическом и ультразвуковом контроле, а также при механических испытаниях и при металлографическом исследовании
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
7/18/1994
SKU: RUSS20017
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Main materials »
Steel, cast iron »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.6 Industrial safety requirements for pressure equipment »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.10 Central heating systems »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.60 Water supply systems »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.025 Outdoor plumbing systems »
The Document is Replaced With:
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 1412-85: Flakish graphite cast iron
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 15895-77: Statistical quality control. Terms and definitions
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 2.101-68: Unified system for design documentation. Types of items
GOST 20072-74: Heat-resistant steel
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 2246-70: Welding steel wire. Specifications
GOST 24297-87: Input inspection of products. General provisions.
GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 5.1215-72: Metal arc welding electrodes of mark АНО-4 for mild structural steel. Quality requirements for certified products
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 977-88: Steel castings. General specifications
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
The Document is Referenced By:
GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications
GOST R 54865-2011: Heat supply of buildings. Method for calculation of energy requirements and efficiencies for of heat generation with heat pump systems
MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE
Model series 20.0027: Reinforced Concrete Supports for Joint Suspension of 10 kV Overhead Line Protected Wires and Self-Carrying Insulated Wires of Double-Chain 0.4 kV Overhead Line. Working drawings
MU 34-70-100-85: Methodical instructions for commissioning works on the thermal mechanical equipment of the machine halls of nuclear power plants
MU OT RM 02-99: Assessment of the safety of workplaces for their certification of working conditions
OST 108.026.06-79: Pressure-reducing cooling equipment. General specifications.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.940.02-82: Welded joint Seams of thermal power plants pipelines. Types and main dimensions.
OST 108.961.02-79: Carbon and alloy steel castings for components of stationary steam turbines with secured strength properties at high temperatures. Specifications.
OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements
OST 34-10.749-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-750-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-751-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-752-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-753-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-10-754-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
PB 06-09-92: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals
POT R M-006-97: Intersectoral labor protection rules for cold metal processing
POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products
POT R M-018-2001: Intersectoral labor protection rules when applying metal coatings
POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities
POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars
POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-14000-003-98: Rules for labor protection in the manufacture of boiler work and metal structures
POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway
POT R O-97300-07-95: Rules for labor protection in the production of alcohol and alcoholic beverages
POT RO-32-TsP-652-99: Rules for labor protection during the maintenance and repair of railway tracks and structures
RD 03-131-97: Regulations on Arrangement and Conducting of Acoustic-Emissive Control of Vessels, Units, Boilers and Process Pipelines
RD 03-29-93: Instructional Guidelines For Engineering Certification of Steam and Hot-Water Boilers, Pressure Vessels, Steam and Hot-Water Pipelines
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.
RD 10-319-99: Model Guidelines for Safe Practices for Boiler Plant Personnel
RD 10-369-00: Provisions on steam and hot-water boilers, vessels, steam and hot water pipelines industrial safety expertise.
RD 12-VEP: Methods of conducting technical audits of existing centralized heat supply systems (RC audit of the Center)
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
RD 153-34.0-20.518-2003: Standard instructions on protection of heat supply system pipelines against external corrosion
RD 153-34.0-20.522-99: Model Guidelines for Periodic In-Service Technical Certification of Pipelines of Piped Heat Supply Networks
RD 153-34.0-39.604-00: Procedural Guidelines for Detaching Support and Suspension System of Piping System and Acceptance of Support and Suspension Fastening System After Completion of Repair
RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.
RD 153-34.1-17.465-00: Methodological guidelines for the assessment of internal corrosion driving rat in heating systems.
RD 153-34.1-20.329-2001: Procedural Guidelines for Testing Piped Hot Water Heat Supply Networks for Maximum Temperature of Heat Transfer Agent
RD 153-34.1-39.504-00: General technical requirements for fittings of CHP plant ( TPP OTT - 2000).
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 24.031.121-91: Guidelines for equipping of stationary steam boilers with vapor and water sampling devices
RD 2730.940.102-92: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements.
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 34.20.501-95: Technical operation rules for power plants and networks of the Russian federation
RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (
RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS
RD 5-VEP: Guidance document on the use of axial bellows expansion joints of OJSC Metalomp in the design, construction and operation of heating networks according to technical specifications TU 5-99 NFCP.302667.310 TU (SK-160.000.00.TU) "Compensators bellows" SK-MK
RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements
RD RosJeK 05-014-98: Guidelines for expert examination of pipelines of steam and hot water of category IV, supervised by the Gosgortekhnadzor of Russia
RMK 11-87: Temporary guidelines for the design of process piping heating systems with hot water, steam and steam condensate
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SNiP 2.04.12-86: Steel pipelines strength analysis
SO 34.09.164-00: Model Program for Energy Inspections of Thermal Energy Transport and Distribution Systems (Piped Heat Supply Networks)
SP 12-133-2000: Safety in construction. Statutes on the procedure for certification of work stations by working conditions in construction and housing and utilities.
SP 41-101-95: Designing heat supply stations (to the SNiP 2.04.07-86)
SP 41-104-2000: Design of independent heat supply sources
SP 41-105-2002: Design and construction of underground thermal networks made of steel pipes with industrial thermal insulation made of polyurethane foam in polyethylene sheath
ST TsKBA 003-2003: Pipe fittings. Enclosures and covers. Rationing static strength
TR 129-02: Technical recommendations for the construction of heat and water supply networks of steel pipes with polyurethane foam insulation in underground channel and ground gaskets
TR 160-04: Technical Recommendations for the design and channelless installation of intra-block pipelines for hot water supply and heat supply from glass-basalt-plastic pipes and products
TSN 41-307-2003: Design and Construction of Piped Heat Distribution Networks with Individual Foam Polyurethane Thermal Insulation. City of Moscow
TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines
TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm
TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel
TU 4859-002-03984155-99: Steel Pipes with Thermal Insulating and Waterproofing Coatings. Technical Specifications
TU 5764-011-01297858-99: Steel pipes with thermal insulation from polyurethane foam. Technical conditions
TU 576431-006-01297858-99: Heat-hydro-insulated pipes with thermal insulation made of polyurethane foam. Technical conditions
TU 576431-009-01297858-99: Pipeline elements with polyurethane foam insulation. Technical conditions
TU 5768-008-04002154-00: Steel Pipes with Foam Polyurethane Insulation and Waterproof Coating. Technical Specifications
VRD 39-1.10-013-2000: Guidelines for the Use of Composite Materials Developed by Porseal Ltd (St. Petersburg) for Repair Purposes at Petroleum and Natural Gas Facilities (Includes "Analysis of Carrying Capacity of 530-1420-mm Pipelines Repaired with the Use of Composite Materi
VRD 39-1.10-049-2001: Правила распространяются на эксплуатацию, реконструкцию и ремонт магистральных, межпромысловых и промысловых конденсатопродуктопроводов и отражают специфику транспорта стабильеого, нестабильного, деэтанизированного конденсата, широкой фракции легких углев
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
