imgalt

GOST 27036-86

ГОСТ 27036-86

Bellows metal expansion joints and seals

Компенсаторы и уплотнения сильфонные металлические. Общие технические условия

Status: Effective - Restored on the territory of the Russian Federation. Decree of the State Standard of Russia dated 05.03.2003 No. 69-st (IUS 6-2003)

The standard applies to metal bellows for expansion joints, designed for tight connection with respect to moving elements of mechanisms, devices, pipelines, and metal bellows for sealing, intended for separating volumes of liquids and gases, limited with respect to moving structures. The standard does not apply to bellows expansion joints and seals intended for tunnelless underground installation, and to special bellows expansion joints and seals created by direct orders of the Ministry of Defense.

Стандарт распространяется на сильфонные металлические компенсаторы, предназначенные для герметичного соединения относительно перемещающихся элементов механизмов, устройств, трубопроводов, и сильфонные металлические уплотнения, предназначенные для разделения объемов жидкостей и газов, ограниченных относительно перемещающимися конструкциями. Стандарт не распространяется на сильфонные компенсаторы и уплотнения, предназначенные для бестуннельной подземной прокладки, и на специальные сильфонные компенсаторы и уплотнения, создаваемые по прямым заказам Министерства обороны.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 10/20/1986

SKU: RUSS20041

Price: $548.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.1 Basic requirements for instruments and test equipment »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.120 Measurement of fluid flow parameters »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.120 Measurement of fluid flow parameters »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.120 Measurement of fluid flow parameters » 17.120.01 Measurement of parameters of fluid flow in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.120 Measurement of fluid flow parameters » 17.120.01 Measurement of parameters of fluid flow in general »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P0 General rules and regulations for instrument-making industry » P04 Details and components of general application in instrument making »


The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1536-76: Flanges for ship's pipeline systems. Coupling dimensions and sealing surfaces

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 19807-91: Wrought titanium and titanium alloys. Grades

GOST 2.124-85: Sequence of application of purchased products

GOST 20072-74: Heat-resistant steel

GOST 22161-76: Marine machines, mechanisms, steam boilers, vessels, apparatus. Norms and rules of hydraulic and air testing

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 25756-83: Bellows expansion joints and (bellows) seals. Terms and definitions

GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions

GOST 2874-82: Drinking water. Hygienic requirements and quality control

GOST 29329-92: Balance for static weightings

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3068-88: Two lay steel rope type ТК construction 6x37 (1+6+12+18)+1x37 (1+6+12+18). Dimensions

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 380-94: Normal quality carbon steel

GOST 4543-71: Structural alloyed steel

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

The Document is Referenced By:

Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST R 50392-92: Fittings for metal bellows expansion joints and seals. Types, main parameters and dimensions. General specifications

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS

SP 81.13330.2017: The reclamation systems and construction

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Preservative oil K-17
Language: English
Price: $68.00
imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
Chill moulds. Ventilation channels. Dimensions
Language: English
Price: $68.00
imgalt
Additive АКОР-1. Specifications
Language: English
Price: $41.00
imgalt
Ceramic brick and stone. General specifications
Language: English
Price: $247.00
imgalt
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English
Price: $154.00
imgalt
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English
Price: $272.40
imgalt
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English
Price: $386.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!