imgalt

SNiP III-18-75

СНиП III-18-75

Steel structures. Regulations on execution and acceptance of work.

Металлические конструкции

Status: Not effective - Superseded. IUS 4-2001

This chapter of the Building Regulations contains the requirements for the manufacture, installation and acceptance of steel structures for buildings and industrial buildings (blast furnaces and gas cleaning, cylindrical vertical tanks for oil and oil products, wet gas holders, mast and tower communication facilities, hydraulic structures, power transmission towers over 1000 V, as well as in the manufacture and acceptance of steel structures of bridges).

Настоящая глава Строительных норм и правил содержит требования изготовления, монтажа и приемки стальных конструкций зданий и производственных сооружений (доменных цехов и газоочисток, цилиндрических вертикальных резервуаров для нефти и нефтепродуктов, мокрых газгольдеров, мачтовых и башенных сооружений объектов связи, гидротехнических сооружений, опор линий электропередачи напряжением свыше 1000 В, а также при изготовлении и приемке стальных конструкций мостов).

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 10/20/1975

SKU: RUSS20055

Price: $1,545.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » K.53 Metal structures »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Welding staff »

Welding regulations » Admission Testing »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.10 Metal constructions »


The Document is Replaced With:

GOST 23118-99: Steel construction structures General Technical Specifications

The Document References:

GOST 10299-68: Half round head rivets of normal precision. Sizes

GOST 10300-68: Countersunk-head rivets of normal precision. Sizes

GOST 10301-68: Rivets with a semi-hollow head of normal accuracy. Dimensions

GOST 10906-66: Angle washers

GOST 11371-68: Washers. Sizes

GOST 14771-69: Seams of welded connections. Arc welding in shielding gases. Main types and structural elements

GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions

GOST 14792-69: Oxygen and plasma-arc cutting. Precision of parts and blanks and surface quality of the cut

GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3242-69: Seams of welded connections. Methods of quality control

GOST 427-56: Measuring metal rules

GOST 5264-69: Seams of welded connections. Manual arc welding. Main types and structural elements

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7502-69: Measuring metal tapes

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 3.05.06-85: Electrical devices

The Document is Referenced By:

GOST 22130-86: Steel Pipeline Parts Movable supports and suspensions Specifications

GOST 23118-78: Structural metalwork. General specifications

GOST 23119-78: Steel welded roof trusses of double angles for industrial buildings. Specifications

GOST 23120-78: Steel flights of steps, stair landings and railings. Specifications

GOST 23121-78: Steel crane-runway beams for general-purpose overhead travelling electric cranes of 50 t load-carrying capacity

GOST 23682-79: Steel stepped columns for buildings with general-purpose overhead electric cranes of 50 ton capacity. Specifications

GOST 24741-81: Joint for connection of crane rails to steel crane girders. Specifications

GOST 25772-83: Steel guard railing of stairways, balconies and roofs. General specifications

GOST 26429-85: Steel structures of suspended transport tracks. Specifications

GOST 26804-86: Metal road safety barriers. Specifications

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 29166-91: Mechanical attractions. Steel structures. Principal rules of the design

ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.09.03-85: Design Guide for Anchor Bolts for Securing Building Structures and Equipment

Manual for SNiP 2.09.03-85: Manual on designing stand-alone supports and overpasses for process pipelines

Manual for SNiP 2.09.03-85: Conveyor Gallery Design Guide

Manual for SNiP 2.09.03-85: Design of open crane overpasses

Manual for SNiP 2.09.03-85: Design of retaining walls and basement walls

Manual for SNiP 3.01.03-84: Manual for the production of geodetic works in construction

Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction

Manual to SNiP II-23-81: Manual to SNiP II-23-81 on design of strengthening of steel structures

MDK 4-04.2002: Model Guidelines for Operation of Hot Water Storage Tanks in Public Piped Heat Supply Systems

MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work

MDS 12-7.2000: Guidelines On Procedure for State Supervision for Compliance with Construction Standards and Codes during Construction and Installation Activities at Industrial Facilities

ORD 00 000-89: Operation of Steel Structures of Factory and Industrial Occupancies

OST 32.100-87: Ultrasonic inspection of welds of welded joints of bridges, locomotives and cars

OST 34-29-582-82: Protective coating for steel structures of high-voltage substation overhead power line supports and open junction boxes by hot tinning method. Technical requirements. Acceptance rules and inspection methods.

OST 34-42-841-86: Organization of assembly works in nuclear thermal power plants. Assembly of thermal and mechanical equipment in nuclear thermal power plants with ВВЭР-1000 reactors. General technical requirements.

OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 36-72-82: Steel building structures. Field connections on high-strength bolts. Typical technological process.

OST 36-78-83: Steel building constructions. Requirements for delivery to export

OST 45.091.350-91: Occupational safety standards system. Metal masts and towers of radio enterprises. General safety requirements

OST 45.48-96: Automatic container telephone exchanges. Construction requirements.

P 79-2000: Model Guidelines for Operation of Hydraulic Structures of Electric Power Generating Stations

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PB 11-80-94: Safety Requirements in Blast Furnace Operations

RB-005-98: Requirements to Certification of Building Structures Important for Safety of Nuclear Facilities

RD 08-95-95: Provision on the system for technical diagnostics of welded vertical cylindrical oil and petroleum products tanks

RD 153-34.0-20.507-98: Model Guidelines for Operation of Thermal Energy Transportation and Distribution Systems (Piped Heat Supply Networks)

RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2

RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures

RD 153-34.1-37.525-96: Guidline for the use of tanks of sulfuric acid and sodium hydroxide to the thermal electric power stations

RD 153-39.4-056-00: Main crude pipeline. Operations rules.

RD 22-01-97: Requirements on Safety Assessment of the Operation of Production Buildings and Structures of Factory and Industrial Facilities (Inspection of Structural Elements by Specialized Organizations)

RD 24.031.15-88: Methodological instructions. Designing stationary boilers steelworks.

RD 34.10.126-94: Instructions for operational control of assembly processes, welding and heat treatment.

RD 34.10.130-96: Instructions for visual and measuring control.

RD 34.20.501-95: Technical operation rules for power plants and networks of the Russian federation

RD 34.21.142: Guidelines for the Design of Steel Pipelines for Hydraulic Structures

RD 34.21.363-95: Procedural Guidelines for Inspection of Production Buildings and Structures at Thermal Power Plants Under Rehabilitation

RD 34.21.408-95: Guidelines for Acceptance of Smokestacks Under Construction

RD 34.21.526-95: Model Guidelines for Operation of Metal Tanks for Storage for Liquid Fuel and Hot Water

RD 34.21.621-95: Guidelines for straightening crane tracks in the main buildings of thermal power plants

RD 34.21.622-96: Procedural Guidelines for Inspection of Roof Structures of Main Buildings of Thermal Power Stations

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD 34.27.202: Guidelines for Installation of Electric Filters Type UG

RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 39-0147098-005-88: Environmental Protection Regulations for the Production, Treatment, and Transportation of Crude Oil

RD 39-0147103-341-86: Guidelines for Hydraulic Testing and Commissioning of Metal Tanks for Petroleum and Petroleum Products

RD 39-30-816-82: Rules for the operation of floating roof tanks

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Resolution 251: Rules for the technical operation of communal heating boiler houses

RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises

RTM 36.15-89: Integrated Labor Rates for Fabrication of Steel Structures for Upright Cylindrical Tanks

RTM 6.030-1-87: Large systems of community TV reception

RU 05-85: Instructions for the design and installation of bases and foundations of vertical steel tanks in the conditions of Middle Ob

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SNiP 3.03.01-87: Bearing and enclosing structures

SNiP 3.05.03-85: Heat networks

SNiP 3.05.06-85: Electrical devices

SNiP 3.06.04-91: Bridges and pipes

SNiP 3.07.01-85: Hydraulic engineering river constructions

TSN 50-304-2000: Foundation Beds, Foundations, and Underground Structures

TU 102-314-81: Boxing unified for production and auxiliary buildings of land objects of the oil and gas industry

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications

TU 102-587-91: Production-auxiliary box

TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions

TU 34-38-20188-94: Frameworks, stairs and platforms of stationary boilers. General technical conditions for major repairs

TU 35-1385-81: Span metal railway buildings with riding on top 18.2 - 33.6 m

TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications

TU 35-369-78: Pontoon KS-63 metal universal

TU 36-1199-81: Slatted welded floor type "Visp". Technical conditions

TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions

TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions

TU 36-2287-80: Bent closed welded square and rectangular profiles

TU 5210-001-25432924-2008: Fences, road, metal, barrier type

TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type

TU 5216-002-18601734-2000: Metal road holding guard for cars, side, first type, single-sided

TU 5216-021-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided

TU 5216-024-00110604-06: Fences bridge, holding, for cars, side, first type, double-sided

TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal

TU 5216-067-36910961-2002: Retention fences, for vehicles, side, first type, single-sided and double-sided

TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions

VPNRM 498-87: Departmental production standards of materials for installation and special construction work. Manufacturing and installation of technological metal structures for food, textile and light industry equipment

VRD 66-91-85: Guidelines for the quality control of welding work on construction sites

VSN 07-81/Minoborony: Technical rules of quality control and acceptance of installation work at the facilities of the Ministry of Defense

VSN 10-83/USSR Minselstroy: Recommendations for the construction of modular elevators

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 141-80: Guidelines for Supply of Structural Steel by Fabrication Shops

VSN 188-78: Guidelines for Mechanical Treatment of Welds in Steel Structures of Bridges

VSN 193-81: Guidelines for development of programs of works execution on erection of construction structures

VSN 200-83: Work Execution Guidelines for Substructure Construction for High-Rise Residential Buildings

VSN 214-82: Collected volume of instructions on rust-proofing

VSN 218-85: Installation of Process Equipment at Dairy and Meat Industry Facilities

VSN 265-84/Minmontazhspecstroj SSSR: Instructions for the installation of freight and passenger aerial cable transporters

VSN 33-2.2.12-87: Irrigation and Drainage Systems and Structures. Pumping Stations. Design Standards

VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III

VSN 349-87: Welding of Galvanized Steel Ribbed Roof Decks for Light-Weight Roofing

VSN 356-86: Erection of Structural Elements to Support Space-Frame Pipe Roofing Assemblies of "Kislovodsk" Type for One-Story Industrial Occupancies

VSN 362-87: Disinfections and Etching of Pipelines

VSN 375-77: Guidelines for Automatic Submerged Arc Welding and Electroslag Welding with Metal Powder Additive

VSN 396-85: Installation of Process Equipment for Steel Mills

VSN 398-79: Installation of Process Equipment for Blast-Furnace Plants

VSN 398-87: Installation of Process Equipment for Blast-Furnace Plants

VSN 406-87: Installation of Process Equipment for Ore Dressing and Sintering Plants

VSN 41.88: Design of ice-resistant stationary platforms

VSN 413-80: Installation Guidelines to Hoisting-and-Conveying Machinery

VSN 427-81: Guidelines for Welding Structural Steel Using Welding Wire PPB-5

VSN 435-82: Compendium of Specified Quantity Allowances for Electric Welding Cable Used in Construction and Installation Operations

VSN 439-83: Consolidated Integrated Indices of Labor Cost of Fabricating Components for Industrial Buildings

VSN 463-85: Use of Helicopters for the Erection of Structural Elements

VSN 506-88: Design and construction of ground anchors

VSN 517-89: Installation of Process Equipment and Metal Structures for Coke-Oven Batteries

VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings

VSN 5-81: Guidelines for In-Field Layout for the Construction, Rehabilitation, and Overhaul of Roads and Road Facilities

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Metals. Methods of tension test
Language: English
Price: $469.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!