PB 03-384-00
ПБ 03-384-00
|
|
Rules for design, manufacture and acceptance of steel welded vessels and apparatus
Правила проектирования, изготовления и приемки сосудов и аппаратов стальных сварных
Status: Not effective
The rules apply to steel welded vessels and apparatus operating under a pressure of not more than 16 MPa (160 kgf
Правила распространяются на стальные сварные сосуды и аппараты, работающие под давлением не более 16 МПа (160 кгс/см2), вакуумом с остаточным давлением не ниже 665 на (5 мм рт. ст.), внутренним давлением 0,07 МПа (0,7 кгс/см2) и менее (под налив) и при температуре стенки не ниже -70 °С, для опасных производственных объектов. Правила не распространяются на: сосуды, работающие под вакуумом с остаточным давлением ниже 665 на (5 мм рт. ст.); сосуды, предназначенные для транспортирования нефтяных и химических продуктов; баллоны для сжатых, сжиженных и растворенных газов; трубчатые печи; резервуары (емкости) для хранения химических и нефтяных продуктов, проектируемые в соответствии со строительными нормами и специальными правилами. Правила устанавливают технические требования к конструкции, материалам, изготовлению (доизготовлению), методам испытаний, приемке, реконструкции, ремонту, монтажу сосудов и аппаратов. В дополнение к требованиям настоящих Правил следует руководствоваться нормами и правилами по промышленной безопасности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
10/4/2000
SKU: RUSS20057
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
1 General industrial safety requirements for operation of a hazardous production facility »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.01 Storage tanks for liquids and gases in general »
The Document is Replaced With:
PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses
The Document References:
ATK 24.200.03-90: Support Racks for Upright Apparatus. Types, Design, and Dimensions
ATK 24.200.04-90: Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements
GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 12619-78: Conical heads with knuckle, apex angles 60 and 90 degrees. Basic dimensions
GOST 12620-78: Conical heads without knuckle, apex angles 60, 90 and 120 degrees. Basic dimensions
GOST 12621-78: Conical heads without knuckle, apex angle 140 degrees. Basic dimensions
GOST 12622-78: Flat heads witch knuckle. General dimensions
GOST 12623-78: Flat neads without knuckle. General dimensions
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14192-96: Cargo marking
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1525-91: Rods of monel. Specifications
GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1
GOST 17232-99: Aluminium and aluminium alloys plates. Specifications
GOST 17314-81: Devices for fastening thermal insulation of steel vessels and equipment. Design and dimensions. Technical requirements
GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17711-93: Cast copper-zink alloys (brass). Grades
GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes
GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications
GOST 18661-73: Steel. Method for measurement of hardness by shock indentation
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19821-83: Shutters for still picture cameras key parameters. General specifications. Test methods
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 2.601-95: Operational documents
GOST 20072-74: Heat-resistant steel
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21646-76: Brass tubes for heat exchange apparatus
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 2246-70: Welding steel wire. Specifications
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 25949-83: Ceramic trimmer capacitors type kpk-m. Specifications
GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions
GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions
GOST 26159-84: Cast iron vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 26179-84: Basic norms of interchangeability. Tolerances for sizes above 10000 up to 40000 mm
GOST 26296-84: Overhung supports of suspended vertical vessels and apparatus. Basic dimensions
GOST 26364-90: Ferritometers for austenitic steels. General specifications
GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 28759.2-90: Steel flat welded flanges of vessels and apparatus. Design and dimensions
GOST 28759.4-90: Steel butt welded flanges of vessels and apparatus for gaskets of octangular sections. Design and dimensions
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3242-79: Welded joints
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 380-88: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4543-71: Structural alloyed steel
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 492-73: Nickel, nickel and copper-nickel alloys treated under pressure. Grades
GOST 494-90: Pipes of brass
GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5521-93: Shipbuilding rolled steel
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance
GOST 6533-78: Ellipsoidaldished heads flanged made of steel for vess els apparatus and boilers. Basis dimensions
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7062-90: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances
GOST 8050-85: Carbon dioxide,
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.402-80: Metal surface preparation for painting
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST 9087-81: Welding melted fluxes
GOST 931-90: Brass sheets and strips. Specifications
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9617-76: Vessels and apparatus. Series of diameters.
GOST 977-88: Steel castings. General specifications
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
RD 26-11-08-86: Welded Joints. Mechanical Tests
SNiP 2.01.01-82: Construction climatology and geophysics
The Document is Referenced By:
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-584-03: Rules of design, manufacturing and acceptance of welded steel vessels and apparatuses
RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
SO 153-34.17.439-2003: Instruction for prolongation of exploitation term of pressure vessels
VSN 07/02/34 Russian Defense Ministry: Design of fuel depots of the Ministry of Defense of the Russian Federation
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.