RD 39-132-94
РД 39-132-94
|
|
Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
Правила по эксплуатации, ревизии, ремонту и отбраковке нефтепромысловых трубопроводов
Status: Not effective - Not applicable. By order of the Ministry of Energy of Russia No. 687 dated 08/22/2018
The rules establish the requirements for the operation of oil field pipelines for the transport of oil, gas and associated produced water.
Правила устанавливают требования к эксплуатации нефтепромысловых трубопроводов для транспорта нефти, газа и попутно добываемой пластовой воды
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Fuel and Energy of the Russian Federation,
12/30/1993
SKU: RUSS20060
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of oil and gas industry facilities »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Polymers »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.4 Environmental safety requirements in design, installation and operation of submarine cables and pipelines »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
As a Replacement Of:
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147103-344-86: Rules for technical operation of collection systems and intra-field transport of oil and gas
The Document References:
GOST 10006-80: Metal pipes
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10277-90: Putties. Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 12.0.005-84: Occupational safety standards system. Metrological support of occupational safety. General
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.005-75: Painting works
GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 12503-75: Steel Methods of ultrasonic control. General requirements
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 12822-80: Steel loose flanges with welded ring for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/sq sm). Design and dimensions
GOST 1412-85: Flakish graphite cast iron
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16149-70: Protection of underground structures against stray current corrosion by polarized protectors. Technical requirements
GOST 16381-77: Thermal insulating building materials and products. Classification and general technical requirements
GOST 17374-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Types and main parameters
GOST 17375-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Sharply curved offsets. Design
GOST 17376-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Tees. Design and dimensions
GOST 17378-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Reducers. Design and dimensions
GOST 17379-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Elliptical pipe seals. Design and dimensions
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 2.503-90: Amendment rules
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20415-82: Non-destructive testing. Acoustic methods. General principles
GOST 20426-82: Radiation methods of defectoscopy
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 2246-70: Welding steel wire. Specifications
GOST 25225-82: Non-destructive testing. Welded joints of tubing. Magnetographic method
GOST 25366-82: Enamel ЭП-5116. Specifications
GOST 25812-83: Steel pipe mains. General requirements for corrosion protection
GOST 26251-84: Galvanium anodes for corrosion protection. Specifications
GOST 26358-84: Pig iron castings
GOST 26656-85: Technical diagnostics. Testability. General requirements
GOST 3242-79: Welded joints
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 380-88: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 4543-71: Structural alloyed steel
GOST 4666-75: Valves. Marking and distinctive painting
GOST 5152-84: Gland Packing Specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9064-75: Nuts for flanged connections with medium temperature 0 to 650 °C. Types and main dimensions
GOST 9066-75: Studs for flanged connections with medium temperature 0 °C to 650 °C. Types and main dimensions
GOST 9089-75: Instantaneous electric detonators. Specifications
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9544-75: Pipeline stop valves. Standards for disc tightness
OST 26-2037-96: Bolts with hexagonal head for flange joints. Design and dimensions.
OST 26-2038-96: Hex nuts for flange connections. Construction and dimensions.
OST 26-2039-96: Studs with screw-end for flanged connections (single precision). Design and dimensions.
OST 26-2040-96: Studs for flanged joints. Design and dimensions
OST 26-2041-96: Nuts for flange connections. Construction and dimensions.
OST 26-845-73: Flange connections valves and piping. Steel Gaskets oval and of octagonal cross-section. Design and dimensions.
OST 36-21-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (about 25 kg/cm2). Sectional pipe-bend R = 1.5, Dy angle of 30°, 45°, 60° and 90°. Dimensions.
OST 36-22-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom ≤ 2.5 MPa (about 25 kg/cm2). Concentric and eccentric transitions. Dimensions.
OST 36-24-77: Welded carbon steel pipeline fittings Dn 500 - 1400 mm for Рn ≤ 2.5 MPa (≈ 25 kgf/cm2)
OST 36-41-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Types and basic parameters.
OST 36-42-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Curved bends. Construction and dimensions.
OST 36-43-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Welded taps. Construction and dimensions.
OST 36-44-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Welded transitions. Construction and dimensions.
OST 36-45-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Branches. Construction and dimensions.
OST 36-46-81: Welded and bent piping parts made of carbon steel Dn up to 500 mm designed for Pn up to 10 MPa (100 kgf/cm2) welded t-joints
OST 36-47-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Flat caps. Construction and dimensions.
OST 36-48-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Finned caps. Construction and dimensions.
OST 36-49-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Technical conditions.
PPB-05-86: Fire Safety Regulations for the Execution of Construction and Installation Work
PTUSP 01-63: Fire safety specifications for the construction design of enterprises in the oil industry
RD 102-011-89: Occupational Safety and Health. Management and Procedural Documents
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 39-0147098-015-90: Instruction on the Monitoring of the Condition of Soil at Objects of Enterprises of the Ministry of the Oil Industry
RD 39-0147103-365-86: Instructions for the reclamation of land contaminated by oil
RD 39-110-91: Main pipeline accident and damage elimination instructions
RD 39-30-499-80: Regulations on the maintenance and repair of the linear part of trunk oil pipelines VNIISPTneft, 1980
RD 39-30-925-83: Procedural Guidelines for Biological Remediation of Lands Disturbed During the Production, Treatment, and Transportation of Crude Oil
RD 39-3-387-80: Guidelines on Selection and Application of Paints/Coatings and Coating Systems for Interior Insulation of Piping for Field Water Flooding Systems
Resolution 1072: Uniform rates of depreciation deductions for the complete restoration of fixed assets of the national economy of the USSR
SN 245-71: Sanitary standards for the design of industrial enterprises
SN 373-67: Instructions on the calculation of steel pipelines for various purposes
SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
SNiP 3.05.06-85: Electrical devices
SNiP 3.06.03-85: Automobile roads
SNiP II-18-76: Foundations and foundations on permafrost soils. Design Standards
SNiP III-39-76: Street Car Tracks
SNiP II-V.9-73: Anticorrosive protection of building structures of buildings and structures. Design Standards
TU 14-3-1128-82: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3-721-78: Spiral welded steel pipes with a diameter of 820; 1020; 1220 mm for gas pipelines
VNTP 3-85: Norms of process design of facilities for gathering transport and treatment of oil gas and water of oil fields
VSN 004-88: Construction of trunk pipelines. Technology and management.
VSN 005-88: Construction of field steel pipelines Technology and arrangement
VSN 006-89: Construction Of Main And Field Pipelines Welding
VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation
VSN 009-88: Construction of main and commercial pipelines. Means and installations of cathodic protection.
VSN 011-88: Main pipeline and flowline construction. Bore cleaning and testing
VSN 012-88: Main pipeline and flowline construction. Quality control and commissioning of works
VSN 013-88/Minneftegazstroj: Construction of main and field pipelines in permafrost
VSN 014-89: Construction of Trunk and Field Pipelines. Environmental Protection
VSN 201-85: Design and construction of roads for oil and gas fields in the north of the Tyumen Region and other areas of the tundra with similar conditions
VSN 51-3-85: Design of field steel pipelines
The Document is Referenced By:
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
OST 153-39.4-010-2002: Method of determination of residual life of oil and gas pipelines and headwork pipelines.
RD 102-008-2002: Instructions for diagnosing technical condition of pipelines with contactless magnetometric method.
RD 153-39.1-561-08: Instructions for the construction, operation and repair of pipelines from metal-plastic pipes
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 1462-203-0147016-01: Welding steel connection parts for operation in oil-field environments with increased corrosion activity. Technical conditions
TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.