RD 153-39.4-041-99
РД 153-39.4-041-99
|
|
Operating rules and regulations for trunk oil product pipelines.
Правила технической эксплуатации магистральных нефтепродуктопроводов.
Status: Not effective - Not applicable. By order of the Ministry of Energy of Russia dated December 31, 2015 No. 1067, the order that approved this document was declared non-applicable
Operating rules and regulations for trunk oil product pipelines.
Правила эксплуатации и регламент магистральных нефтепродуктопроводов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Fuel and Energy of the Russian Federation,
10/12/1999
SKU: RUSS20117
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of oil and gas industry facilities »
Welding regulations »
Welding work »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Certification »
Welding regulations »
Non-destructive control »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Welding materials »
Gases »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.5. Objects of main pipeline transport »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.8 Industrial safety requirements for transport of hazardous substances »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
The Document References:
Federal Law 174-FZ: Ecological Conformity Assessment
GOST 12.0.001-82: Occupational safety standards system. Basic rules
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.026-76: Signal colors and safety signs
GOST 13196-85: Tank contents sampling units for crude oil and petroleum products(permanent installation type). Types and basic parameters. General technical requirements
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 17.1.3.10-83: Nature protection. Hydrosphere. General requirements for surface and underground water control against pollution by oil and oil products while supplying by pipe-line
GOST 17.2.4.02-81: Nature protection. Atmosphere. General requirements for determination of pollutants
GOST 17.5.1.01-83: Nature protection. Land reclamation. Terms and definitions
GOST 17.5.3.06-85: Nature protection. Lands. Requirements for determination of the fertile soil layer standard disposal while performing earth-moving
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 19179-73: Hydrology of land. Terms and definitions
GOST 22782.0-81: Explosion-proof electrical equipment
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25812-83: Steel pipe mains. General requirements for corrosion protection
GOST 26656-85: Technical diagnostics. Testability. General requirements
GOST 26976-86: Petroleum and petroleum products. Methods of mass measurement
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 8.346-79: State system for ensuring the uniformity of measurements. Steel horizontal tanks. Methods and means of verification
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
MI 1823-87: State system for ensuring uniformity of measurements. Capacity steel vertical cylindrical tanks. The method of measurement using geometric and volumetric methods
MI 2240-92: State system for ensuring uniformity of measurements. Analysis of the state of measurement, control and testing in the enterprise, organization, association. The method and procedure of the work
MI 2273-93: Scope of use of instruments , which are subject to calibration
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 09-170-97: General rules on explosion safety for explosive- and fire-hazardous chemical, petrochemical plants and oil refineries
PB 13-407-01: Uniform Safety Requirements for Blasting Operations
POT R O-112-002-98: Rules for labor protection during the operation of trunk oil pipelines
PPB 01-93*: Fire Safety Rules in the Russian Federation
PPB-05-86: Fire Safety Regulations for the Execution of Construction and Installation Work
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
PR 50.2.003-94: National Measurement Standards. Procedure for Government Metrological Supervision of Quantity of Goods Disposed of During Trading Transactions
PR 50.2.005-94: National Measurement Standards. Procedures for Licensing Activity for the Manufacture, Repair, Sales, and Leasing of Measuring Devices
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.007-94: State system for ensuring uniformity of measurements. Verification marks
PR 50.2.008-94: National Measurement Standards. Procedure for Accreditation of Lead and Central Organizations of the Metrological Service of Russian Federation Government Administrative Agencies and Associations of Juridical Persons
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
PR 50.2.010-94: National Measurement Standards. Requirements for Government Centers for Testing Means of Measurement and Procedure for Their Accreditation
PR 50.2.011-94: GSOEI. The procedure for maintaining the state register of measuring instruments
PR 50.2.012-94: GSOEI. The procedure for certification of measuring instruments
PR 50.2.017-95: State system for ensuring uniformity of measurements. Regulations on the Russian calibration system
RD 03-26-93: Provision on the procedure of issuance of special permits (licenses) for the activities connected with high hazard of industrial production enterprises (facilities) and work, as well as provision of safety at the time of using underground resources
RD 08-200-98: Safety rules in the oil and gas industry
RD 153-112-014-97: Guidelines on Accident Response and Repair at Petroleum Product Trunk Pipelines
RD 153-112TNP-027-97: Guidelines for Cold-Weather Overhaul of Petroleum Product Pipelines 100-720 mm in Diameter
RD 153-39.4-001-96: Rules of Delivery of Oil Products To Oil Storage Tanks, Petrol Stations and Warehouses of Combustibles and Lubricants Through the Branches of the Main Oil Product Pipelines
RD 153-39.4-033-98: Norms for natural loss of oil products during receipt, transportation, storage and release at facilities of main oil product pipelines.
RD 153-39.4-044-99: Rules of total overhaul of main oil product pipelines laid in the cities, settlements and entering the territory of tank farms and pumping stations
RD 153-39.4R-002-96: Table of technical equipment of emergency recovery points of oil product pipelines
RD 34.21.122-87: Manual for installation of the lightning protection of buildings and structures
RD 39-0147098-015-90: Instruction on the Monitoring of the Condition of Soil at Objects of Enterprises of the Ministry of the Oil Industry
RD 50-190-80: Guidelines. State supervision of the measurement of petroleum products. Organization and procedure
RDM 0001-90: Instrumentation, automation and telemechanization of branched pipelines. Main provisions
Resolution: Rules for the design and safe operation of steam and hot water boilers
SanPiN 4630-88: Sanitary rules and standards for preservation of surface waters against pollution
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.04.03-85: Sewage. External systems and structures
SNiP 2.05.13-90: Oil-product pipelines laid on the territories of cities and other settlements
SNiP 2.09.03-85: Structures for industrial installations
SNiP 2.11.03-93: Storage of petroleum and petroleum products. Fire safety norms.
SNiP 3.01.04-87: Project acceptance for operation after construction
SNiP 3.02.01-87: Earthen structures, foundation and basis
SNiP 3.05.01-85: Indoor plumbing systems
SNiP 3.05.06-85: Electrical devices
SNiP 3.05.07-85: Automated systems
SO 153-34.20.501-03: Rules for the technical operation of power plants and networks of the Russian Federation
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VPPB 01-03-96: Fire code for JSC Transnefteproduct
VRD 39-1.10-006-2000*: Rules for the technical operation of gas pipelines
VSN: Rules for protection against static electricity in the chemical, petrochemical and refinery industries
VSN 006-89: Construction Of Main And Field Pipelines Welding
VSN 014-89: Construction of Trunk and Field Pipelines. Environmental Protection
The Document is Referenced By:
MI 3295-2010: State system for ensuring uniformity of measurements. The error rates of the balance of the handed over and received oil in JSC AK Transnefteprodukt
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3372-12: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Systems for measuring the quantity and quality of petroleum products. General technical and metrological requirements
RD 153-39.4-001-96: Rules of Delivery of Oil Products To Oil Storage Tanks, Petrol Stations and Warehouses of Combustibles and Lubricants Through the Branches of the Main Oil Product Pipelines
RD 153-39.4-044-99: Rules of total overhaul of main oil product pipelines laid in the cities, settlements and entering the territory of tank farms and pumping stations
RD 153-39.4-073-01: Model Emergency Response Plan at Main Oil Product Pipelines
RD 153-39.4-074-01: Instruction on emergency and damage response at submerged crossings of main oil-products pipelines.
RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.
RD 153-39.4R-151-2003: Table of technical equipment and standards for the number of services for the protection of oil pipelines, patrol and search groups typical LDS
SO 01-05-AKTNP-002-2004: On automation and telemechanization of installations of pipeline transportation system of oil products of JSC "AK" Transnefteprodukt "
SO 08-04-AKTNP-009-2004: Table of technical equipment of emergency recovery points of main oil product pipelines of JSC AK Transnefteprodukt
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.