RD 153-39-011-97
РД 153-39-011-97
|
|
Instruction on accounting of oil products on trunk oil-products pipelines.
Инструкция по учету нефтепродуктов на магистральных нефтепродуктопроводах
Status: Effective
Instruction on accounting of oil products on trunk oil-products pipelines.
Инструкция по учету нефтепродуктов по магистральным нефтепродуктопроводам.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Fuel and Energy of the Russian Federation,
1/23/1997
SKU: RUSS20121
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Sectoral and departmental regulatory and methodological documents »
Design and construction of oil and gas industry facilities »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.1 Management infield of subsoil use »
4.1.3 State accounting and reporting infield of subsoil use »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
I Industrial Safety Administration »
6 Requirements for organizations infield of industrial safety »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.99 Other equipment for oil and gas industry »
The Document References:
ETKS Issue 36: Unified tariff qualification reference book of works and professions of workers. Release 36. Production of asbestos technical products
Federal Law 60-FZ: On the supply of products for federal state needs
GOST 13196-85: Tank contents sampling units for crude oil and petroleum products(permanent installation type). Types and basic parameters. General technical requirements
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 26976-86: Petroleum and petroleum products. Methods of mass measurement
GOST 27352-87: Road vehicles for fuelling and transportation of oil and petroleum products. Types parameters and general specification
GOST 28498-90: Liquid-in-glass thermometers
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures
GOST 7502-89: Measuring metal tapes. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.207-76: Direct measurements with multiple observations. Observation data processing methods
GOST 8.247-77: State system for ensuring the uniformity of measurement. Sounding stick for oil product level measuring in transport and stationary reservoirs. Methods and means of verification
GOST 8.321-78: State system for ensuring the uniformity of measurements. Industrial applicator level gauges and float-type level gauges. Methods and means of calibration
GOST 8.346-79: State system for ensuring the uniformity of measurements. Steel horizontal tanks. Methods and means of verification
GOST 8.470-82: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring volume of liquid
GOST 9544-75: Pipeline stop valves. Standards for disc tightness
I 36-55: According to calibration calibrated tank trucks
MI 1823-87: State system for ensuring uniformity of measurements. Capacity steel vertical cylindrical tanks. The method of measurement using geometric and volumetric methods
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
PR 50.2.017-95: State system for ensuring uniformity of measurements. Regulations on the Russian calibration system
RD 153-39.4-001-96: Rules of Delivery of Oil Products To Oil Storage Tanks, Petrol Stations and Warehouses of Combustibles and Lubricants Through the Branches of the Main Oil Product Pipelines
RD 50-156-79: Guidelines. Determination of the capacity and graduation of reinforced concrete cylindrical tanks with a precast wall with a capacity of up to 30,000 cubic meters by the geometrical method
RDM 0001-90: Instrumentation, automation and telemechanization of branched pipelines. Main provisions
Resolution P-7: Instruction on the quality acceptance procedure for industrial and technical products and consumer goods
SNiP 2.05.13-90: Oil-product pipelines laid on the territories of cities and other settlements
SNiP II-D.10-62: Main pipelines. Design Standards
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
The Document is Referenced By:
GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods
MI 2579-2000: State system for ensuring uniformity of measurements. Tanks (tanks) of river and sea bulk vessels. Method of verification by the volumetric method
MI 2904-2005: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic counters Altosoni-5 (mod. Altosoni-5M). Methods of calibration testing by a truboporshnevoy calibration unit at the metering of petroleum products
PMG 65-2003: State system for ensuring the uniformity of measurements. Rail tankers. General requirements for methods of verification by a volumetric method
RD 153-39.4-001-96: Rules of Delivery of Oil Products To Oil Storage Tanks, Petrol Stations and Warehouses of Combustibles and Lubricants Through the Branches of the Main Oil Product Pipelines
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.